Database Develop

Kaiser/TyTn II and QPST?

Hello, I'd like to request information on how to use QPST with my Kaiser via USB. QPST shows 'No Phone' on all ports and I don't seem to be able to enter diagnostic mode.
Any advice would be greatly appreciated. Thanks.

i'm running Vista if that makes a difference...

I also have a PC running XP if that helps.
Nobody will help me?

i am trying to do the same thing, i have gone as far as flashing to jockyw's spl with tty enabled. but i dont know how to put it in qpst diag mode... i am using vista, but also tried under xp, with no change.

I'm trying to do the same thing. I can get the comm ports to show up and use QPST while the phone is in the tri-color bootloader state. QXDM will also works in that state but since the phone is not runing, I get no useful information.
I have not been able to get the com ports to show up with the phone is fully booted like I can with CDMA smart phones by dialing ##DIAG#.

you can get qpst to recognize it in tri color mode? the only way i was able was to put it in download mode by issuing rtask a, and radata 90000000 1. after that i installed the motoq drivers available in the frankenkaiser pack. it shows up in qpst as download mode, but it can not mess with anything because it is in dl mode. if you know how to put it in diag mode, that would be a step for me!

I have installed the wmodem drivers and put the phone in bootloader. But qpst sees nothing. Is there a diagnostic mode similar to a CDMA phone.

does anybody know more about qpst?

Can't seem to get adb to detect the phone -> so no unlocked bootloader

Or.. I've installed the usb driver package from LG. And I can go to the power off-> charger mode, and get contact with the "modem device", or whatever it is they're using, for a short while. But that won't help me get the bootloader unlock routine to work, it just gets stuck in "download mode!!!!", presumably because it needs to do some weird online routine as well, that I didn't know about, or it needs to download something via gprs, or ... and so on. And in phone mode, the serial number/device doesn't show up. (I tried removing the memory card, on the off chance that having the "mass driver" device turning up would mess something up, but no luck.
Anyway. So is there a trick here, to get adb to detect the devices, or to make the "modem device" mode have precedence, or something of that sort? I'm a bit reluctant to try disabling some of the devices, even if that would work, in case there's something else I don't know about being run half-way as well.. will the mode change on reboot, and I'll get stuck with a brick..?
Have anyone else had the same thing? I can run the pc-suite and the lg support tool just fine. But it seems that what happens is I'm able to have the adb tool detect the serial number for a very short time, and then it disappears and I can't connect to it again. Therefore, no bootloader unlock tool init..

I had the same problems back a while ago.
It got solved on the 262-000 Bootloader unlock thread.
I think you need the newest adb and fastboot drivers
and disable the modem in system settings of your pc,
but search for the mentioned thread and look it up there
Hope you get it working

[Q] Phone Not Found! Software Update [KDZ]

Hi. I'm trying to make my phone return to official LG 4.1 stock, but for some reason Software Update says that my phone was not found! I have installed the drivers using LGMobile Support Tool and I have properly enabled Windows Enable (it indicates On). Also, I disable the modem from device manager successfully. My phone goes to S/W Upgrade normally, but the software fails to identify my phone! Any ideas...?
EDIT: ok. It seems that the problem was solved by using a different computer. I guess there's something wrong with my USB ports or something...

Can't get prompt for RSA fingerprint

Hello, I upgraded my nexus 6 using the factory image file 7.1.1 shamu-n6f26q-factory and everything is working fine. I got Developer Options visible so I can use the Nexus Root Toolkit by WugFresh like I always do and I cant get the pop-up where is says this PC allows ect or the "prompt for RSA fingerprint" as its called in the directions. I tried different USB ports and I tried selecting the different options and still no pop-up. Any Ideas?

OMG.... Please delete post! I have been messing with this for over an hour pluging and unpluging ect. and all it was is I turned debuging on but I didnt scroll down and tick the usb debuging on... Sorry guys its fixed!

USB Debugging Issues

I am on the stock, rooted rom. I just got the OTA. But I need to flash reflash the stock recovery since I am rooted and on TWRP. But I can't seem to get USB debugging to work. I've tried rebooting both my PC and my phone, different ports, tried enabling and disable USB debugging in developer options, even tried resetting to default settings. But adb devices still shows blank on my PC. Any idea what is the issue? I usually got a pop up to show that ADB is being requested and I will have to agree to it but I cant seem to get that popup now.

sacredsoul said:
I am on the stock, rooted rom. I just got the OTA. But I need to flash reflash the stock recovery since I am rooted and on TWRP. But I can't seem to get USB debugging to work. I've tried rebooting both my PC and my phone, different ports, tried enabling and disable USB debugging in developer options, even tried resetting to default settings. But adb devices still shows blank on my PC. Any idea what is the issue? I usually got a pop up to show that ADB is being requested and I will have to agree to it but I cant seem to get that popup now.
Click to expand...
Click to collapse
I had similar problem before. Try this, with no Connection to PC, revoke usb debug authorisations, and restored default in deverloper option, setbupn USB debug again then connect to PC . if that don't work , try rebooting pc
Sent from my SM-T819 using Tapatalk