Related
Hey people, does anyone knows where to buy (online) little metal grill that fits on speakerphone for my HTC Legend. I try to search ebay but with no luck. Can anyone help me to solve this problem?
Thank you in advance...
You need to buy the main chassis for the phone for this part..if you need one i have a spare but its attatched to a broken LCD (and working digitizer)
AFAIK this does not come with chasis (just ordered one from htcrepairparts.com, still waiting) But I need one too Friend threw me a backpack with my phone inside and it hit a metal pipe just above the grill...display works, but there is a huge dent and the grill is all squiffy...
Also no luck buying it online...I'll try to repair it when the housing comes...
whats that "grill"??
It's the metal thing covering the earphone (see attachment).
BTW: I've tried to take my Legend apart and it looks like you have to remove the digitizer from AMOLED to remove this grill, so changing it would be problematic at best...I'm gonna let it be as it is
oh thats the grill
maybe u can use another stuff, not the original one?
See this site
I used it to change my grill which i got off ebay with the chassis
I was only able to dismantle my Legend thanks to this site...
If it comes with a new chasis, I'm gonna ghange it too, but the specs didn't indicate the grill...I'll just wait till it comes.
Right ive taken my "spare" legend apart... I have a speaker grill in Grade B Condition (has one little bulge where the LED is)
Tried to change the front glass of my OB i bricked the connector for the touch screen.
Has anyone an idea how to fix it??
That is awkward. That i think it's a card edge connector, you can try your luck on google, or take a look here or better here..
Good luck.
Sorry for giving bad news, but the connector itself its OK, the problem is around the copper tracks inside of it.
In the image I can see that you pulled up too much from the connector, and due this force, the cooper tracks broke up.
Its really hard to fix.. if you have good soldering skills, you can download the service manual and see where the tracks go, and fix by soldering very small wires.
I had problems too, with the connector that connects the usb, power button and earphones. It had dropped alone inside the phone, due poor soldering quality.
So, nothing was broken, and I could solder it back. But your case is very different.
I guess that the only fix for most users is a new board.
You need a hot air solder gun for that job. Or at least a very thin metal one, but it will be difficult anyway. I think using a hot air one might help you to fix the copper tracks, it's not necessarily to have great skills.
So I'm in the process of replacing the ear piece speaker. It has always acted up but finally completely went out when I dropped the phone today. Tore the phone apart and pulled the bad one out, and put it back together, so for the time being it's a phone with no speaker, but strangely now the rear camera doesn't work either.
So I'm curious, maybe I still don't have the ribbon cable from the camera seated correctly. But do you think maybe the camera and speaker are on the same circuit and without the speaker in there the camera won't work?
The ear piece not working can usually be fixed by bending the metal pins. I've managed to fix3 Droid's this way. that being said, I don't think the camera has anything to do with the ear piece.
Check if you've inserted the ribbon properly. The ribbon goes in pretty deep. It's easy to make a mistake when connecting the ribbon.
You wouldn't have some instructions for that procedure, do you? Or is there an iFixit video? Have the same problem with the speaker.
Sent from my DROID4 using Tapatalk now Free
Bumping this old thread in the event that someone in the future finds it useful. Obviously, replacing the speaker will VOID YOUR WARRANTY in every way possible, and if you're not careful will ruin your phone! But, if you're like me, your D4 is long out of warranty and it'll be a cold day in hell before you give up your keyboard.
That being said, I just replaced the speaker in my D4, after the stock speaker fizzled and died after almost 2 years. Every now and then it would "fuzz out" and I'd gently tap the phone against my head (which I'm sure looked quite comical) and it would stop. Finally the speaker gave up the ghost entirely and it was nearly impossible to hear. I used resources from this site to guide me in taking it apart.
You'll need a torx T5 and T3 driver - DO NOT try to use any substitute drivers if you don't have an official T5 or T3, like I did - you will strip the screws (they strip VERY easily) and you'll need to bust out the dremel to drill/grind away the screw, or buy a whole new LCD/digitizer assembly for $~70 (which, as of this posting, are getting harder to find). You might think that you can fudge it with an eyeglass repair flathead driver, but you can't. Trust me. T3 and T5 drivers are cheap online, do it right.
For the actual replacement speaker itself, I got a speaker for a Nokia Lumia 610 on ebay for about 4 bucks (free shipping!). It's almost identical to the stock D4 speaker, but it looks to be a little better quality and the actual place where noise comes out looks to be ever so slightly bigger. It "sits" in a little pocket in the outer housing/screen digitizer, held in place by the flex cable. You'll see once you get there.
Make sure both the dual snap connector that connects the mainboard to the screen/digitizer is securely fastened, and also make sure that the tiny snap connector that goes from the screen to the digitizer itself is securely fastened as well - this second snap connector is up by the notification LED. I scared myself when I re-assembled everything and my touchscreen didn't respond. Also, when you're working up by the notification LED, there's a small piece of white-ish rubber that sits between the actual LED itself and the little hole where light comes out on the front of the phone. It's crucial that you don't lose this - the LED is a few mm offset from the hole, and this piece of rubber glows and creates the notification light that you see on the front. Without it, no notification light.
Be careful with the mainboard, replacement units are very hard to find and will only get rarer as the D4 ages. It's basically the heart of your phone.
Tweezers and a "safe-open pry tool" (basically a piece of soft plastic to ease apart the pieces of your phone) make this process easier as well.
Another note: there are 2 hidden T5 screws behind the bezel that surrounds the rear camera and flash. When you go to peel this up, you'll probably ruin it - this is poor design IMO, and mostly inevitable. Good news though, replacement camera bezel parts are available online for a few bucks.
All in all, this process isn't difficult, but requires really good light (super bright lamp or headlamp) and will give you a greater appreciation for your phone and how it's both a magical little black box as well as just a collection of shiny bits.
Good luck!!
Khiraji said:
You'll need a torx T5 and T3 driver - DO NOT try to use any substitute drivers if you don't have an official T5 or T3, like I did - you will strip the screws (they strip VERY easily) and you'll need to bust out the dremel to drill/grind away the screw
Click to expand...
Click to collapse
Listen to him. I learned this the hard way and that is precisely what I had to do. Taking a dremel to my cell phone... I never want to sweat bullets like that again.
Has anybody replaced the bottom speaker before? Google hasn't been able to find me any guides on how to do it. Ifixit implies that it is soldered to the motherboard, but another repair site says it can be pried off.
hecksagon said:
Ifixit implies that it is soldered to the motherboard, but another repair site says it can be pried off.
Click to expand...
Click to collapse
Ifixit is usually right. Also, if something is surface-mount soldered to the board... Yes, you can pry it off... No you wouldn't be able to solder a new one on without the right tools and skills.
I'm hoping it's more like wedged between the board and the grille. Even if it's not it can't be more than a couple leads to solder.
Just replaced it. Very straight forward if you have ever had the phone apart. It is glued down to the motherboard and has contact pins on the backside of it. When I removed the broken one it took the adhesive with it. I used a thin film of super glue to get the new one to stick. If there is anybody else considering replacing the bottom speaker I would be willing to write up a guide. Considering how little info I have found on this I don't think its something many people do.
hecksagon said:
Just replaced it. Very straight forward if you have ever had the phone apart. It is glued down to the motherboard and has contact pins on the backside of it. When I removed the broken one it took the adhesive with it. I used a thin film of super glue to get the new one to stick. If there is anybody else considering replacing the bottom speaker I would be willing to write up a guide. Considering how little info I have found on this I don't think its something many people do.
Click to expand...
Click to collapse
I don't have a need at the moment, but it would be nice to have the write up available just in case.
hecksagon said:
Just replaced it. Very straight forward if you have ever had the phone apart. It is glued down to the motherboard and has contact pins on the backside of it. When I removed the broken one it took the adhesive with it. I used a thin film of super glue to get the new one to stick. If there is anybody else considering replacing the bottom speaker I would be willing to write up a guide. Considering how little info I have found on this I don't think its something many people do.
Click to expand...
Click to collapse
I have to do the same on mine, bottom speaker not working. Is it visible ones you remove mid frame?
Yes once the midframe is removed it is very obvious where it is. It will be the largest component on the PCB at the bottom of the device. It is held down with some adhesive and uses contact pins for the connection. It was very easy to remove and replace. If you buy a replacement on eBay you may get a damaged one like I did. It appeared dented and crackles when it is installed. I was going to send it back but just never got around to it. I will be picking up another speaker and replacing it again.
hecksagon said:
Yes once the midframe is removed it is very obvious where it is. It will be the largest component on the PCB at the bottom of the device. It is held down with some adhesive and uses contact pins for the connection. It was very easy to remove and replace. If you buy a replacement on eBay you may get a damaged one like I did. It appeared dented and crackles when it is installed. I was going to send it back but just never got around to it. I will be picking up another speaker and replacing it again.
Click to expand...
Click to collapse
Thanks, going to order one on ebay and hope it doesn't come damage. Good luck with the replacement.
hecksagon said:
Just replaced it. Very straight forward if you have ever had the phone apart. It is glued down to the motherboard and has contact pins on the backside of it. When I removed the broken one it took the adhesive with it. I used a thin film of super glue to get the new one to stick. If there is anybody else considering replacing the bottom speaker I would be willing to write up a guide. Considering how little info I have found on this I don't think its something many people do.
Click to expand...
Click to collapse
Are the top and bottom speakers the same part? I'm seeing tons of top speakers online but very few for the bottom, anybody got a part # by chance?
No, bottom speaker is different from the top. I don't see part numbers listed but if your search term includes lower you should find it. Anything labeled earpiece is upper.
Need to disassemble my Doogee Y6 (not Y6 Max) to replace the USB port.
If anybody has successfully removed the back, some brief instructions would be really appreciated.
Best wishes, Ron.
kiwironnie said:
Need to disassemble my Doogee Y6 (not Y6 Max) to replace the USB port.
If anybody has successfully removed the back, some brief instructions would be really appreciated.
Best wishes, Ron.
Click to expand...
Click to collapse
I'll bet you can find a video on YouTube explaining how to disassemble your device.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
I'll bet you can find a video on YouTube explaining how to disassemble your device.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Already search extensively, no luck so far. Prefer not to 'experiment' and wreck the thing!
kiwironnie said:
Need to disassemble my Doogee Y6 (not Y6 Max) to replace the USB port.
If anybody has successfully removed the back, some brief instructions would be really appreciated.
Best wishes, Ron.
Click to expand...
Click to collapse
Bro check YouTube very well... it there
Sent from my iPhone using Tapatalk Pro
I can help you.
kiwironnie said:
Need to disassemble my Doogee Y6 (not Y6 Max) to replace the USB port.
If anybody has successfully removed the back, some brief instructions would be really appreciated.
Best wishes, Ron.
Click to expand...
Click to collapse
Did u fix it? I can help you. I opened the phone like 10+ times.
Hi, I have the same problem, I need to open the phone to replace the camera but did not manage to find anything on youtube. Would u please help me? Thanks
Monster 00 said:
Did u fix it? I can help you. I opened the phone like 10+ times.
Click to expand...
Click to collapse
Sorry for the later reply Monster. Thought this thread had gone dead!
If you've got some tips about how to open the case without destroying it that would be really helpful.
There's a few videos etc on opening Doogees around (Y6 Max etc) but none that I've found for the Y6, which is quite a different case.
Cheers, Ron
kiwironnie said:
Sorry for the later reply Monster. Thought this thread had gone dead!
If you've got some tips about how to open the case without destroying it that would be really helpful.
There's a few videos etc on opening Doogees around (Y6 Max etc) but none that I've found for the Y6, which is quite a different case.
Cheers, Ron
Click to expand...
Click to collapse
So to start take a flat screwdriver. You may turn off the phone it's not necessary. Remove the sim tray. To open the phone read carefully. Don't try to remove the back metal plate, you're doing it all wrong. There is a plastic surround that meets with the glass. You need to insert your flat screwdriver in the corner(I prefer bottom right) of the plastic case/surround and the phone screen must be facing you. Now there is a super thin black plastic that separate the glass and the surround, you need to put your screwdriver between the thin black plastic and the surround (mine is gold). The plastic will wear a little bit but if you do it properly, you won't notice any scratch or paint damage. Put your screwdriver in and pull it apart trying to lift the back cover. Don't be scared but be careful, go until you hear a click then you may use your finger nail or the screwdriver and pass it all around the phone. You will hear many clicks. Don't be scared for the fingerprint sensor because it is stick to the phone. After having done that for the first time you will be able to open the phone like previous phones used to be, that is removing it like a removable back cover using your fingernails. I hope I could do a video. Tell me if you did not understand a thing because I can use my phone only on Saturday and Sunday( exams are near).
Monster 00 said:
So to start take a flat screwdriver. You may turn off the phone it's not necessary. Remove the sim tray. To open the phone read carefully. Don't try to remove the back metal plate, you're doing it all wrong. There is a plastic surround that meets with the glass. You need to insert your flat screwdriver in the corner(I prefer bottom right) of the plastic case/surround and the phone screen must be facing you. Now there is a super thin black plastic that separate the glass and the surround, you need to put your screwdriver between the thin black plastic and the surround (mine is gold). The plastic will wear a little bit but if you do it properly, you won't notice any scratch or paint damage. Put your screwdriver in and pull it apart trying to lift the back cover. Don't be scared but be careful, go until you hear a click then you may use your finger nail or the screwdriver and pass it all around the phone. You will hear many clicks. Don't be scared for the fingerprint sensor because it is stick to the phone. After having done that for the first time you will be able to open the phone like previous phones used to be, that is removing it like a removable back cover using your fingernails. I hope I could do a video. Tell me if you did not understand a thing because I can use my phone only on Saturday and Sunday( exams are near).
Click to expand...
Click to collapse
Brilliant! Thanks Monster. For me you provide a remarkably clear explanation. Used a very small, flat bladed jewellers screwdriver to lever the black plastic surround away until it clicked, just as you describe, then used an old credit card as a helper, to slide along the gap, to separate the metal back from the rest of the phone. Now just need to figure out how to actually make the repair!
Very best of luck with your exams. (so glad to be largely done with such things!)
Best wishes, Ron.
kiwironnie said:
Brilliant! Thanks Monster. For me you provide a remarkably clear explanation. Used a very small, flat bladed jewellers screwdriver to lever the black plastic surround away until it clicked, just as you describe, then used an old credit card as a helper, to slide along the gap, to separate the metal back from the rest of the phone. Now just need to figure out how to actually make the repair!
Very best of luck with your exams. (so glad to be largely done with such things!)
Best wishes, Ron.
Click to expand...
Click to collapse
I was about to make a video to help you. I'm glad you succeeded to open the phone. Now tell me what do you need to repair.
Monster 00 said:
I was about to make a video to help you. I'm glad you succeeded to open the phone. Now tell me what do you need to repair.
Click to expand...
Click to collapse
A video would no doubt be tremendously helpful to others anyway.
The problem with the phone is the micro USB socket is stuffed. The plug is loose and difficult to get a connection, due to continual pushing on it by the USB cover flap on the flexible plastic case that came with the phone. Have cut the flap off but the damage has been done (warning to others!).
At first glance it looks like the circuit board will have to come out to have any reasonable chance of de-soldering the socket.
Cheers Ron.
kiwironnie said:
A video would no doubt be tremendously helpful to others anyway.
The problem with the phone is the micro USB socket is stuffed. The plug is loose and difficult to get a connection, due to continual pushing on it by the USB cover flap on the flexible plastic case that came with the phone. Have cut the flap off but the damage has been done (warning to others!).
At first glance it looks like the circuit board will have to come out to have any reasonable chance of de-soldering the socket.
Cheers Ron.
Click to expand...
Click to collapse
I would prefer replacing the charging board itself. Changing the USB connector seems difficult for me. I can do a teardown video but the problem is the camera. I only have a Samsung galaxy core to make video as I can't take the y6 itself to make a video. The galaxy core does not support focusing while filming and the videos turn out blurry.
Monster 00 said:
I would prefer replacing the charging board itself. Changing the USB connector seems difficult for me. I can do a teardown video but the problem is the camera. I only have a Samsung galaxy core to make video as I can't take the y6 itself to make a video. The galaxy core does not support focusing while filming and the videos turn out blurry.
Click to expand...
Click to collapse
Great advice, makes sense. I now see that it is a separate board and that there are several sellers of Doogee Y6 charging boards. So the plan now is to purchase and try to replace the board, perhaps also replacing the USB connector on the old board as a spare.
Do you know if the ribbon cable(s) have a lock, or does it just pull out? Although a video would have been great, some basic advice on removing the board could be a life saver.
kiwironnie said:
Great advice, makes sense. I now see that it is a separate board and that there are several sellers of Doogee Y6 charging boards. So the plan now is to purchase and try to replace the board, perhaps also replacing the USB connector on the old board as a spare.
Do you know if the ribbon cable(s) have a lock, or does it just pull out? Although a video would have been great, some basic advice on removing the board could be a life saver.
Click to expand...
Click to collapse
I'll try my best to make a video as I can't do it in front of my parents and as I told you I can only get the phone Saturday and Sunday. Today is Sunday, I'll try my best to help you. If I can't make a video then I'll post the instructions here. I forgot if it has a lock or not.
Monster 00 said:
I'll try my best to make a video as I can't do it in front of my parents and as I told you I can only get the phone Saturday and Sunday. Today is Sunday, I'll try my best to help you. If I can't make a video then I'll post the instructions here. I forgot if it has a lock or not.
Click to expand...
Click to collapse
Thanks again Monster. The part's on order now now. So whatever you manage will be really appreciated. No rush as it's coming from China, at least a couple of weeks away. Cheers Ron.
kiwironnie said:
Thanks again Monster. The part's on order now now. So whatever you manage will be really appreciated. No rush as it's coming from China, at least a couple of weeks away. Cheers Ron.
Click to expand...
Click to collapse
Hey I opened the phone and checked the flex cable. It has a lock hidden under some cover, cloth like material. I'm sorry it I won't be able to do a video because it is super blurry. Now that u know how to open the phone you have to unscrew 4 screws at the bottom. After that gently lift the plastic cover because you may damage the speaker and/or the vibrator. You will see the speaker is actually low quality. As for the charging board, it's pretty easy to remove. Once you remove the plastic cover open the lock by gentle lifting the flap and disconnect the cable. I think that you will need to remove the battery too because the cable is too short and maybe be tricky for you to remove it. You must be really carefully when removing the battery. Take a flat object( I used the same flat screwdriver) and try to lift the battery. Make sure not to puncture it. There's a lot of glue underneath. When you remove the battery then it will be easy to remove the cable. There is two clips holding the board in place and you will need to move one of them to take out the board. Mime is a bit damaged but it's OK. The plastic cover protects it. Don't hesistate to ask questions if you don't understand. Thanks.
Monster 00 said:
Hey I opened the phone and checked the flex cable. It has a lock hidden under some cover, cloth like material. I'm sorry it I won't be able to do a video because it is super blurry. Now that u know how to open the phone you have to unscrew 4 screws at the bottom. After that gently lift the plastic cover because you may damage the speaker and/or the vibrator. You will see the speaker is actually low quality. As for the charging board, it's pretty easy to remove. Once you remove the plastic cover open the lock by gentle lifting the flap and disconnect the cable. I think that you will need to remove the battery too because the cable is too short and maybe be tricky for you to remove it. You must be really carefully when removing the battery. Take a flat object( I used the same flat screwdriver) and try to lift the battery. Make sure not to puncture it. There's a lot of glue underneath. When you remove the battery then it will be easy to remove the cable. There is two clips holding the board in place and you will need to move one of them to take out the board. Mime is a bit damaged but it's OK. The plastic cover protects it. Don't hesistate to ask questions if you don't understand. Thanks.
Click to expand...
Click to collapse
Brilliant, thanks again! No need for a video, as your explanation is very clear and should be obvious to others after they get the back off the phone. Having recently removed a glued battery from a Kindle, it was a hell of an arm wrestle! Hopefully it will be a bit easier with the Y6. I have a flat nylon spudger with a rounded edge, which should be able to lift the battery without puncturing it. Upgrading the speaker at the same time could be a useful hack, if a better one can be found that fits. Although don't know if the impedance is the same for most phone speakers.
Will post results here including any lessons learnt. Cheers Ron.
The replacement usb charge board arrived, purchased from this guy: http://www.ebay.com/itm/New-Origina...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649 Posting the url as the service was excellent. Very well packed in its own cardboard box and sent by registered post. So I would buy from him again, even if he is a little more expensive than some on AliExpress.
To fit the new board, the case was opened, as described above and the battery removed. To remove the battery, two screws need to be removed from a metal plate covering the battery connector. The battery ribbon cable connector can then be levered up with a small flat screwdriver blade. It's a effectively a plug with a push fit onto the connector so just pops off.
To remove the battery I used an old credit card, sliding it underneath at one edge of the battery, then gently pushing it forward to release the battery bit by bit, from it being glued to the base. This shouldn't need a lot of force and it is important to avoid snagging the ribbon cable that runs under the battery.
The black plastic cover that houses the speaker and covers the charging board was then removed by unscrewing 4 screws. On my phone one screw had a white plastic covering, into which a cross head jewellers screwdriver can be pushed to grip the screw. The charger board was then exposed and the two speaker wires and two wires from the vibrator were unsoldered using a fine tip iron. The plastic cover was then fully removed. The black rubber tape covering the ribbon cable connector was scraped away, the connector unlocked and the ribbon cable removed. The antenna connector attached to the charger board was then levered off using a small flat bladed screwdriver. The charger board itself was then pulled out. It is held in place by tiny plastic tabs on either side and was a bit of a fiddle to remove.
The old charger board has some Kapton or similar tape underneath, which the new board didn't have. So I applied some similar tape to the new board, but this may not be essential. The new board was then fitted back in, again a bit of a fiddle. I found the best way was was to insert the right hand side of the board first under its tab (looking at the inside of the phone from the charger end), with the board rotated slightly anti clockwise, then pushing the left hand side forward (rotating clockwise) and under the left hand tab so that it effectively clicks into place (not much of a click). The rest of assembly was the reverse of disassembly. Soldering the 4 wires (polarity is marked on the board), pushing the ribbon cable squarely into the connector and locking it. Nearly forgot to push the antenna connector back on!
Replaced the back and the new charge board worked perfectly. What a relief! Thanks again to Monster for getting me started. Cheers Ron.
Hello everyone,
I have every tool needed to fix any problems on any mobile phones. But after fixing my y6, I have thought that a T5S would be piece of cake. But it's not.
Any ideas if I can just remove the broken digitizer to attach the new one or is it glued to the LCD like all new Samsung models?