Related
Hay
My device che2_l11
I wanted flash by fastboot i Extracted system. Img and more and flash by cmd and fastboot mod.
Now my problem
My problem is that the cell phone will restart in 20 seconds.
You're now using the buttons on the top and bottom.
Flash through File update. App
I do think, however, continues to update up to 20% off the device again
Please help me
Forgive for my bad English
please help me my device deded
:crying::crying::crying::crying:
davod84 said:
:crying::crying::crying::crying:
Click to expand...
Click to collapse
I think ur mobile got bootloop.. download firmware from honor site, extract it(dload/upload.app) and keep that folder in root of ur SD Card.
Swtich off ur Phone and do long press of Power button+vol up+vol down.. it'll hard reset ur mobile..
PS: please download proper firmware which suites ur model no.
vinothkumarv said:
I think ur mobile got bootloop.. download firmware from honor site, extract it(dload/upload.app) and keep that folder in root of ur SD Card.
Swtich off ur Phone and do long press of Power button+vol up+vol down.. it'll hard reset ur mobile..
PS: please download proper firmware which suites ur model no.
Click to expand...
Click to collapse
thanks my friends for ansver
my problem
i downloads all frimwers
an copy to sd card
i flash an restart by 20/
device and not complet flash
my device is full sharged
:crying::crying::crying::crying::crying::crying:
why to help me?
Fixed your device?
Hello everybody, I am trying to debrand my new Huawei p9. I have tried the dload method explained in the development section but I can't manage to make the upgrading start: when I press both volume buttons and turn on (with the downloaded dload folder inside the micro SD) the device simply vibrates two times and then reboot. Do you know if I am doing anything wrong or if there are other methods? Any help would be appreciated. Thanks a lot
PS: I'm sorry if I am opening a new thread but xda doesn't let me reply to the original thread because I don't have the right to post in the development section of the forum.
You must press them at the same time, turn off the device and press the vols buttons first and them the power button. The .rar/.zip must be uncompressed on the SD.
HI thank you for your help, but that is exactly what I did: unzipped the file (which contained only the dload folder) and put it in the root of the micro sd. I turned off the phone and pressed the volume buttons (up and down) together and then pressed the power button. The phone vibrated twice then the logo appeared then the screen became back and then again the logo and this loop continued until I stopped pressing the volume buttons. Anyway I don't have the phone with me now so I'll try again tomorrow. Will it work also if I put the dload folder inside the internal memory?
put file, sd card dload folder work. I dont try in internal memory.
general91 said:
HI thank you for your help, but that is exactly what I did: unzipped the file (which contained only the dload folder) and put it in the root of the micro sd. I turned off the phone and pressed the volume buttons (up and down) together and then pressed the power button. The phone vibrated twice then the logo appeared then the screen became back and then again the logo and this loop continued until I stopped pressing the volume buttons. Anyway I don't have the phone with me now so I'll try again tomorrow. Will it work also if I put the dload folder inside the internal memory?
Click to expand...
Click to collapse
only hold down the volume up and down keys with power at same time until you see the Huawei logo then let go. do not carry on holding them down - this is what was causing your phone to loop
Thanks for the help it worked! I spent so much time trying to understand what I was doing wrong while it was so simple.
general91 said:
Thanks for the help it worked! I spent so much time trying to understand what I was doing wrong while it was so simple.
Click to expand...
Click to collapse
you're welcome - often can be simple with phones, other times not so
Debrand p9 vodafone IT
Hello,
I would like to debrand my phone. I read some guide here and I will use srk tool.
Now I'm on c02b133.
Which is the correct procedure?
have I to install via dload c432b136, go to c900 and then unlock bootloader, root e oem info file?
Or have I to unlock bootloader, root, oem info file and then flash the rom c432?.
I have this doubt because in some post, someone told to reinstall stock recovery after root, and forced the installation of the stock rom..so I'm not sure about correct way.
Thank to everyone
Massimiliano
maxmax91 said:
Hello,
I would like to debrand my phone. I read some guide here and I will use srk tool.
Now I'm on c02b133.
Which is the correct procedure?
have I to install via dload c432b136, go to c900 and then unlock bootloader, root e oem info file?
Or have I to unlock bootloader, root, oem info file and then flash the rom c432?.
I have this doubt because in some post, someone told to reinstall stock recovery after root, and forced the installation of the stock rom..so I'm not sure about correct way.
Thank to everyone
Massimiliano
Click to expand...
Click to collapse
Can you share thread which you got c432? I have L09C440B138 and want to L09B432 open market nougat
sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Foul restart by holding down the volume button in the upper part (+). In recovery you do comes out of the 2 formats that are indicated and so you starts with the configuration of fabrica.
Grlschia said:
Foul restart by holding down the volume button in the upper part (+). In recovery you do comes out of the 2 formats that are indicated and so you starts with the configuration of fabrica.
Click to expand...
Click to collapse
sorry but the phone dont start to recovery mode it still blocked on logo and whene I press volume down boutton and plug the usb cable it enter to the fastboot & rescue mode only
laro2202 said:
sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Click to expand...
Click to collapse
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
jeinnerabdel said:
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
Click to expand...
Click to collapse
thank for the message
the phone is huawei P9 Plus VIE-L29 the wrong thing that I did that I flash a data file before flashing rom and the big problem that the phone enter only to the fastboot and rescue mode like the attached picture and I thing that my phone is dead now and no way to resolve this problem
Don't worry FIND THIS VIDEO in youtube Huawei Honor 7 flashing in fastboot - DC Phoenix... BUT u should payed 15 euro for using this program but it works 100 % i used it for my VIE-L29C10 this programm flashed you phone from fastboot! GOOD luck MATE
Ok, first, don't worry, this is soft brick, which means the phone will recover, it's just a matter of flashing the right rom. Follow my steps above and make sure you turn on the phone holding the 3 buttons at the same time, once the logo appears release the power button and keep both volume keys for a few seconds and release them. That's forced update mode.
The rom is about 2.8 gigabytes and must be in dload folder on the root of your external SD.
---------- Post added at 01:40 AM ---------- Previous post was at 01:38 AM ----------
PD: Don't pay for software to get the phone back! You can do it yourself!
jeinnerabdel said:
Ok, first, don't worry, this is soft brick, which means the phone will recover, it's just a matter of flashing the right rom. Follow my steps above and make sure you turn on the phone holding the 3 buttons at the same time, once the logo appears release the power button and keep both volume keys for a few seconds and release them. That's forced update mode.
The rom is about 2.8 gigabytes and must be in dload folder on the root of your external SD.
---------- Post added at 01:40 AM ---------- Previous post was at 01:38 AM ----------
PD: Don't pay for software to get the phone back! You can do it yourself!
Click to expand...
Click to collapse
yes mate u're right first of all he should try flash his cellphone 3 button method but if it's not work he should pay for this porgamm and 100 % that programm flash his phone from rescue mode
laro2202 said:
thank for the message
the phone is huawei P9 Plus VIE-L29 the wrong thing that I did that I flash a data file before flashing rom and the big problem that the phone enter only to the fastboot and rescue mode like the attached picture and I thing that my phone is dead now and no way to resolve this problem
Click to expand...
Click to collapse
mine is the same except that the FRP is Unlock
have you found a fix yet
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
jeinnerabdel said:
Questions:
-How were you installing the firmware (which method)?
-What firmware were you putting in?
-What version is your phone?
-What android version did your phone had before bricking it?
I've been there with the soft brick. I got my phone back to life by downloading a ROM, putting it into the external SD Card, created a folder named 'dload' and adding the UPDATE.APP file there, then, press vol up + vol down + power and the restore started.
One thing that's worth to mention is that the phone may not boot even with this, but you just need to put the phone on erecovery ( turn it on with vol up + power ) and wipe cache + factory reset. This will bring it back to life!
Click to expand...
Click to collapse
Where did you find the rom to download ?
DenPim said:
yes mate u're right first of all he should try flash his cellphone 3 button method but if it's not work he should pay for this porgamm and 100 % that programm flash his phone from rescue mode
Click to expand...
Click to collapse
Just rescued my phone by using the DC Unlocker tool.....Best 15 euros I've spent
what exactly you purchased in dc unlocker? I have the same problem as you pls help..
Jpacs said:
what exactly you purchased in dc unlocker? I have the same problem as you pls help..
Click to expand...
Click to collapse
I purchased 15 credits in DC phoenix....Read the Q&A and it will help......The program let me install a firmware using fastboot
cuzovillafan said:
I purchased 15 credits in DC phoenix....Read the Q&A and it will help......The program let me install a firmware using fastboot
Click to expand...
Click to collapse
I just restored my phone but spent 30, so annoying thnx
Sent from my VIE-L29 using XDA-Developers Legacy app
Jpacs said:
I just restored my phone but spent 30, so annoying thnx
Click to expand...
Click to collapse
Have you managed to update it
laro2202 said:
sorry for my english
please help i brick my huawei p9 plus vie-l29 after try to install a new framware it is blocked on logo an can enter only to fastboot & rescue mode
Click to expand...
Click to collapse
The device loses a Recovery Stock file that must be installed
1. Download the file Recovery Open the zip file and place the file in the Minimal ADB and Fastboot program
2. Open Minimal ADB and Fastboot
3. Connect your phone to the computer
4. Type this command (fastboot flash recovery recovery.img)
5. After installing the Recovery Stock file in your mobile phone, disconnect the cable and continue pressing the stop button until it restarts and press the stop button with the volume up button until you see Recovery and load the original ROM in the SD card
I'm sorry I can not add links to my posts a few
samy5689 said:
The device loses a Recovery Stock file that must be installed
1. Download the file Recovery Open the zip file and place the file in the Minimal ADB and Fastboot program
2. Open Minimal ADB and Fastboot
3. Connect your phone to the computer
4. Type this command (fastboot flash recovery recovery.img)
5. After installing the Recovery Stock file in your mobile phone, disconnect the cable and continue pressing the stop button until it restarts and press the stop button with the volume up button until you see Recovery and load the original ROM in the SD card
I'm sorry I can not add links to my posts a few
Click to expand...
Click to collapse
No chance to work,FRP and Bootloader is locked.This only working with unlocked Bootloader to flash img Files via Fastboot
Only DC Phoenix helps
---------- Post added at 08:34 AM ---------- Previous post was at 08:29 AM ----------
Instruction here
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
This works with locked FRP and locked Bootloader.
You have 72 Hours for 15€.
Only what you need is the right Firmware(UPDATE.APP) from your Device
HELP needed please
Tried to change my Vie -L09C02B133 to L09C432 - unlocked bootloader and rooted no probs so took the plunge and followed the video to debrand
After the first step re changing oeminfo again everything seemed to be ok however when my phone rebooted i got a red message saying that the phone had failed verification and may not work properly . It then asked for a password.
After a couple of reboots the phone came on but with no keyboard -
After another reboot i can't get past the Huawei logo ....
Any help appreciated
volume down & power gets me into fastboot & rescue mode bot not letting me connect to hisuite on my pc
have you got sd card? and have you got an adapter so you can use on pc?
ali3nfr3ak said:
have you got sd card? and have you got an adapter so you can use on pc?
Click to expand...
Click to collapse
I do have a SD card and can use it on the pc without the phone
cuzovillafan said:
I do have a SD card and can use it on the pc without the phone
Click to expand...
Click to collapse
power off phone, eject sd card place in pc copy the L09C432 firmware to dload folder ( marshmallow ) , place sd back in phone, hold down vol up + vol down + power buttom and it should flash the L09C432 fimware.
It should boot normally now
ali3nfr3ak said:
power off phone, eject sd card place in pc copy the L09C432 firmware to dload folder ( marshmallow ) , place sd back in phone, hold down vol up + vol down + power buttom and it should flash the L09C432 fimware.
It should boot normally now
Click to expand...
Click to collapse
My phone wont shut down.......I can restart it but it comes up with the verification error and then sticks on logo - ive tried to put the firmware - L09C02 into the dload on my sd card but still no luck ... was originally on L09C02 before running into probs with the debranding
Ok first thing , you have already changed oeminfo , so you can not roll back at this stage to your old firmware, u changed to L09C432 so you need to download L09C432B180 I think it is, might be B181, once you have downloaded that fimware, extract it, you should have a file called UPDATE.APP, remove sd card from phone , place in pc, create a folder called dload in root directory of sdcard, then copy update.app to that folder, only update.app, then hold down volume up + volume down + power button, after phone restarts and Huawei logo appears, release only the power button, a couple seconds later release volume buttons, maybe 5 to 10 seconds after the phone should automatically start updating
ali3nfr3ak said:
Ok first thing , you have already changed oeminfo , so you can not roll back at this stage to your old firmware, u changed to L09C432 so you need to download L09C432B180 I think it is, might be B181, once you have downloaded that fimware, extract it, you should have a file called UPDATE.APP, remove sd card from phone , place in pc, create a folder called dload in root directory of sdcard, then copy update.app to that folder, only update.app, then hold down volume up + volume down + power button, after phone restarts and Huawei logo appears, release only the power button, a couple seconds later release volume buttons, maybe 5 to 10 seconds after the phone should automatically start updating
Click to expand...
Click to collapse
I'll give this a go in the morning....Many thanks for your reply
cuzovillafan said:
I'll give this a go in the morning....Many thanks for your reply
Click to expand...
Click to collapse
Edit......No joy I'm afraid ....Phone completely discharged and when plugged in it boots up but sticks at logo again....Gonna try DC unlocked as described on another thread
cuzovillafan said:
Edit......No joy I'm afraid ....Phone completely discharged and when plugged in it boots up but sticks at logo again....Gonna try DC unlocked as described on another thread
Click to expand...
Click to collapse
YESSS. Got my phone back to L02C432B181 using the DC Unlocker tool... Everything seems fine.....Just waiting for full charge before I try the B362 update
cuzovillafan said:
YESSS. Got my phone back to L02C432B181 using the DC Unlocker tool... Everything seems fine.....Just waiting for full charge before I try the B362 update
Click to expand...
Click to collapse
nice :good:
cuzovillafan said:
YESSS. Got my phone back to L02C432B181 using the DC Unlocker tool... Everything seems fine.....Just waiting for full charge before I try the B362 update
Click to expand...
Click to collapse
My P9 Plus is similar to your phone's problem. Stuck on Huawei logo ang can access Fastboot only. How much did you pay for DC Unlocker? Thank you.
EDIT: Which "Operation name" did you select?
second_east said:
My P9 Plus is similar to your phone's problem. Stuck on Huawei logo ang can access Fastboot only. How much did you pay for DC Unlocker? Thank you.
EDIT: Which "Operation name" did you select?
Click to expand...
Click to collapse
I used DC Pheonix and i pay 15Euros
I flased B181 directly with DC Pheonix
zubyro said:
I used DC Pheonix and i pay 15Euros
I flased B181 directly with DC Pheonix
Click to expand...
Click to collapse
Same here.......Unable to get the update yet though....Well worth the spend to get phone working again
cuzovillafan said:
Same here.......Unable to get the update yet though....Well worth the spend to get phone working again
Click to expand...
Click to collapse
Tried the update again and success ??????
Hello everybody, I have a problem, and I wanted to "relock" my mobile phone boot loader after that the Huawei P8 Lite 2017 wanted to do a factory reset, but it stops at 99%.
I need urgent help.
Best regards
Klotz900 said:
Hello everybody, I have a problem, and I wanted to "relock" my mobile phone boot loader after that the Huawei P8 Lite 2017 wanted to do a factory reset, but it stops at 99%.
I need urgent help.
Best regards
Click to expand...
Click to collapse
try to flash Stock ROM
.
i cant
persona78 said:
try to flash Stock ROM
.
Click to expand...
Click to collapse
i cant to connect the phone with the computer and i cant load bootloader.
Someone said I can do nothing but send the phone.
and i cant go in the recovery.
Klotz900 said:
i cant to connect the phone with the computer and i cant load bootloader.
Someone said I can do nothing but send the phone.
and i cant go in the recovery.
Click to expand...
Click to collapse
Try connecting phone to pc with usb(doesn't matter does pc recognize it) and then try to boot to boot loader.
Or if 2017 model has dload force update method you can try that, just make sure you have lots of battery of it refuses to start at all.
keikari said:
Try connecting phone to pc with usb(doesn't matter does pc recognize it) and then try to boot to boot loader.
Or if 2017 model has dload force update method you can try that, just make sure you have lots of battery of it refuses to start at all.
Click to expand...
Click to collapse
it have enough im sure...
the bootloader dont start i press Vol. - and Power at the startup if i connected the USB cable.
after this i see the huawei logo, and then the handy starts to the "Factory reset" and stopts at 99%
Klotz900 said:
it have enough im sure...
the bootloader dont start i press Vol. - and Power at the startup if i connected the USB cable.
after this i see the huawei logo, and then the handy starts to the "Factory reset" and stopts at 99%
Click to expand...
Click to collapse
Try force update if your device has that possibility(Vol+ and Vol-). How long did you waited at 99%, I think I have always got some error message in similar situation when I've waited like 10mins.
keikari said:
Try force update if your device has that possibility(Vol+ and Vol-). How long did you waited at 99%, I think I have always got some error message in similar situation when I've waited like 10mins.
Click to expand...
Click to collapse
Vol. + and Vol. - does nothing...
i wait for 99% ca. 100 seconds thats unreal ...
Klotz900 said:
Vol. + and Vol. - does nothing...
i wait for 99% ca. 100 seconds thats unreal ...
Click to expand...
Click to collapse
Bootloader i think is press vol -, don't release and plug USB
to flash rom you need default recovery in phone.
To flash copy update.zip to sd card, whit phone off press vol -, vol+ and power.
Or create a dload folder in sd card and copy to inside the update.app, can extract from update.zip, then whit phone off press vol -, vol+ and power.
.