Related
hi there
as of yesterday i accidentally dropped a jack splitter (like this one.. (click here) onto my pda2 from 1 meter..
at first i thought everything was okay
but then i realized that the touchscreen was not working.. the buttons are working..
though i hesitated that it'd never work again, after taking my imate apart and after i put it all together it worked for 10 mins.. then it stopped working again.. this morning it did the same, worked then stopped..
so my questions are:
1. can it be something other than the touchscreen? there is a small dent on the screen but the image on my today screen is displayed correctly..
2. if i really have to change the screen where would i buy 1?
i found this one but i want to have more options if there is
http://www.pdasmart.com/pdaphonexdaii.htm
thanks...
bump
Touchscreens are replaceable but make sure you buy the correct one, as the screen in Alpine is only one of 2 that could possibly have been fitted in Himalayas i.e a touchscreen for an xda2 is not guarenteed to be compatible with the LCD you have.
Depending on LCM, you could look into a repair of the exisiting digitiser, is the screen marked in any way where the item hit it?
Richard
p.s don't bump so quickly - do your research more thoroughly - you're not the first person to suffer this problem...
yes there is a small dent on the screen
i know i searched the forum but maybe i'm searching with wrong terms.. not much came up.
i don't know any other websites than the pdasmart.....
XtremeMaC said:
yes there is a small dent on the screen
.....
Click to expand...
Click to collapse
Then you need a new digitiser, the gap between the touchpanel and glass in the digitiser is reduced where the dent is, so the resistance properties of the digitiser have changed at that point i.e it will think you are always touching that spot. You could remove the plastic overlay, heat it gently and try and bend it back / flatten it but I've tried and never managed to do it
Most places only sell the entire LCD / touchscreen assembly, cheapest I can get for an alpine is about $140 USD for the lot, perhaps check ebay for a unit with a broken LCD?
Richard
Hi All
Spent awhile searching the forums (and the web) but couldn't find any relevant answers -- so here goes & apologies if it has been up before...
My TyTN2 got rain on the screen a few days ago (about 15-20 drops) and since then the touch part of the screen no longer works. The phone itself works perfectly, the screen displays everything as it should, but no touch.
Could a few raindrops do this?
I have a Hermes/TyTN 'lying around', anyone know if the screens are the same/compatible, was about to start searching for part numbers etc. but thought I'd ask the question anyway.
Any help, answers, pointers or links would be appreciated.
TIA
You could always buy a new touch screen.
I saw one at dealextreme.com for 4.99 , probably not the best quality but you can always give it a try for that price
sku.14919
cnn.cn also has the part , but only in combo with the actual lcd screen.
Thanks RacerII -- will check it out..
Had a similar issue with the touch screen dying after an os crash the other night n thought it was dead. Did a hard reset and reflashed and everything worked just fine. Try the hard reset and reflash first before you think about any repair options
@kaalgoosy
Thanks for the reply -- did a hard reset as you suggested, no change -- about to try a reflash -- currently using L26's B1 ROM, have dl'd B4 and will give that a whirl -- only problem seems to be I have to bypass the Welcome/Screen Alignment section (no touchscreen!) and Activesync seems to be lacking/missing/not working -- so can only try the SD method -- just reading up on that now
ROM update made no difference (wasn't holding my breath anyway...)
Looks like a screen replacement, after looking at the potential difficulties separating the digitiser from the LCD, decided a straight LCD replacement is my best option -- have found a place that will supply it (London UK) for £30 + p&p -- anyone know of a better (read cheaper) supplier?
Intending to use Mike Channon's guide to replace it myself...
no few drops of rain wont cause that damage...
most new PDAs and new gadgets in general including cams, portable ps... etc has a elements of water resistant+shock resistant and even an anti-magnetic field absorbtion (or something like) to reduce interference with other devices...
blackfoot said:
My TyTN2 got rain on the screen a few days ago (about 15-20 drops) and since then the touch part of the screen no longer works. The phone itself works perfectly, the screen displays everything as it should, but no touch.
Click to expand...
Click to collapse
there must be another reason cuz first sign of water damage will be blurry display..
blackfoot said:
the screen displays everything as it should, but no touch.
Click to expand...
Click to collapse
get your phone inspected by a professional technician especially if under warranty (dont tell them it was affected by rain drops.. they wont know) it might not be a very fair thing to say but again who said life is fair
blackfoot said:
ROM update made no difference (wasn't holding my breath anyway...)
Looks like a screen replacement, after looking at the potential difficulties separating the digitiser from the LCD, decided a straight LCD replacement is my best option -- have found a place that will supply it (London UK) for £30 + p&p -- anyone know of a better (read cheaper) supplier?
Intending to use Mike Channon's guide to replace it myself...
Click to expand...
Click to collapse
Have you got a web address for the London supplier? I think my screen may be on the way out.
Good luck with the replacement.
@jahrami -- was using the Kaiser's camera to take some photos for my daughter, it started raining while I was taking the last couple. 15-20 drops or so (as I said). Dabbed this off with kitchen roll, put the phone away. Got home a little later, tried to use the phone, no touch -- played around, soft reset etc etc, but nothing.
The rain is the only thing that has happened to it -- the display is perfect, phone itself works perfectly, have hard-reset, reflashed ROM, still no touch control... and while in theory I agree with you that a few drops of rain _shouldn't_ cause this sort of damage, it seems it has. Checked the water damage strip behind the battery, it's white, assume this goes pink/blue or WHY when exposed to real amounts of water.
Sadly, warranty is out (by 1 month) & the local phone shops want £40 to strip it and look... £32 for a screen? I'll do it myself -- if it doesn't fix it, back to the Eten M700...
@ach2 -- tried to put a complete & direct link to the item, message box wouldn't accept it (very long url). This company sells on ebay too, slightly cheaper (27.99 +p&p) and under various other site names, feedback is positive and screens are new. Can't comment on the company personally, unless you wait for a week. Thanks for the good wishes, will probably need them.
http://www.sparepartsformobiles.com search for Kaiser LCD replacement.
OP:
Before you buy anything for 27 quid: Note that there are 2 elements to that screen, as was mentioned (but maybe not quite clear) in post 2. There is the actual screen, which is a liquid crystal screen with thin film transistors with a glass plate on top, but on top of that is a digitizer. The digitizer is literally 2 sheets of slightly conductive plastic put together to assess where the stylus (or your finger) is currently touching it.
The digitizer shouldn't cost you more than about 5-10 quid. The full screen is going to cost you about 30 quid. You definitely don't need a new screen.
I've replaced 2 digitizers and 1 full screen on my HTC magician (I'm very good at smashing it into things) and after I broke it again, I bought a used HTC tilt cause I felt that an upgrade was in order. I ordered the digitizers for the magician and the screens from a generic eBay store in Hong Kong, it arrived the US (Boston) after about 2 weeks, I would expect Old Blighty to be similar.
Greetings from "New" England.
lncdoc
One more suggestion for you: have you considered using a virtual mouse cursor program? Maybe VirtuaMouse One-Hand?
Of course it won't actually "fix" your screen, but at least you'll be able to tap around your PPC until you fix the touch panel itself.
i will agree with such a temporarily fix, use a combination of virtual mouse
and voice commander and hotkeys shortcuts to navigate through your phone
look for second hand screen, there must be some around dude
EGMine said:
One more suggestion for you: have you considered using a virtual mouse cursor program? Maybe VirtuaMouse One-Hand?
Of course it won't actually "fix" your screen, but at least you'll be able to tap around your PPC until you fix the touch panel itself.
Click to expand...
Click to collapse
blackfoot said:
Looks like a screen replacement, after looking at the potential difficulties separating the digitiser from the LCD, decided a straight LCD replacement is my best option
Click to expand...
Click to collapse
@incdoc -- Greetings to you too, cousin -- yes I do realise the screen has a separate digitiser (see quote above from earlier post), and in fact, the same supplier has digitisers for £8 but after reading about the difficulties of separating the digitiser from the LCD thought I would save time, effort and money by replacing the LCD in its entirety. I can always play with the older one afterwards, and if I successfully split them will get a touch screen and keep the thing as a spare, which seems like a good idea, as there are now several more posts regarding the same or similar issues to mine, just within the last few days.
Are you suggesting that separation _isn't_ difficult?
@EGMine -- have to say that I haven't heard of VirtuaMouse One-Hand, will look it up -- thanks for the suggestion.
Jahrami -- thanks for the suggestion, about to check VirtuaMouse and completely forgot about Voice Commander, just changed my ROM to L26's B4, (after fault developed) so haven't set the phone up, yet -- but definitely will set up some voice tags.
Big thank you (for telling me something I should have thought of myself -- age really is a bummer!)
Edit** Dl'd trial of VirtuaMouse, good idea -- hard work! Combination of Voice Tags and scroll wheel much better. Eten M700 back in cupboard. ;-))
Dammit, dammit and dammit!
In the interest of rounding things off -- thought I'd post this to (almost) end my (little) epic.
Bought a replacement screen from the source listed above, £32, web price was lower with free shipping, but phoned the order through to get a quicker delivery. Arrived the next day, exactly as ordered. (Bravo!) No tools included, but I have some anyway.
Used Mike Channons guide to replacement (no mention of the sticky keyboard hinge 'finisher' anywhere BTW), all went as planned. Total time to replace about 1hr 15mins. (Not rushing)
Screen kicked in, onto alignment and yippee! -- touch working again!
Knew I shouldn't have had that celebratory cup of tea! -- put SIM in, followed by SD card, phone no longer recognises the SIM. Bu**er!
Stripped the phone again (impressed myself, took less than 10 minutes), checked to see if the SIM ribbon had popped off -- seemed ok, but popped it and reseated it anyway. Reassembled the phone, popped in the SIM -- Bu**er again.
Stripped the phone again (4 minutes -- not bad eh?), checked the SIM connection to the keypad PCB and 2 of the contacts in the socket look slightly mangled.
At this point now I'm wishing I'd gone for the £70 repair option, it's 20 to 1 in the morning (12:40 am to you), the eyes are a little fuzzy and I (once again) have a TyTNII 'kit' in front of me.
Oh well, there's always tomorrow -- now where did I put my Eten M700?
EDIT** Forgot to add a request, if anyone has a TyTNII in bits and wants to sell the keypad PCB, leave info or PM. Thanks.
EDIT 2** Oh well, seems like I _have_ kiboshed the SIM socket on the keypad PCB -- so hoping someone has one (keypad PCB or TyTNII) lying around will sell for bits?
[Q] Milestone digitizer replaced, but new one has problem with "calibration"
Hi!
I got a two year old Milestone on which the digitizer started to act up a while ago, with random clicks (seems to be referred to as "ghost" clicks) and touches everywhere, pretty unusable. After buying a new digitizer on ebay and replacing the old one, all those problems are now gone!
However, I do still have touch problems. It seems a few percent of the top and the bottom is unreachable. Input is registered, but at the wrong location. The bottom "buttons" (which is via digitizer as well?) works fine however!
A video of it says it all:
ht tp://ww w.youtube.com/watch?v=YNGcpAMPfUQ
(added some spaces to get around spam filter)
To me, this looks like some kind of calibration error... Not sure if that is applicable though.. Cannot find any kind of references to this on either this forum nor anywhere else.
Now, I've tried the following:
* Going back to stock firmware
* Clean CM7 (which is what I used before)
* Wiping all caches & resetting everything
Nothing seems to help. I can not find any calibration tools or anything either..
Any hints?
Thank you!
ermtv must
While waiting for a re-shipped item from the ebay seller (paid extra shipping only), the digitizer magically started to work again!
Not really sure how or why, but after leaving it powered up but idle for almost a week, the upper part of the digitizer was fully functional! The lower part was however still non-functional exactly like the video shows.
For some reason I got the idea that all this was somehow heat related; it had been lying in a relatively warm, closed off room during this period. So, I put the lower, still non-working, half of the digitizer (still powered on) a few centimeters below a regular desk lamp, applying some heat to it. I left it like this for an hour, and when I pulled it out, it was working flawlessly! Has now been working fine for ~2 weeks.
Just thought I'd post this here in case anyone else has the same problem.. There has to be some kind of manufacturing problem with this one, not being glued together properly or something.. At least I got an extra digitizer now as spare, in case this one gives up again
I want to give some context.
I have owned my Z1 since release on a contract. I have previously had the screen replaced twice and it worked fine afterwards.
However, I had dropped the phone resulting in the top of the screen cracking. Got it replaced by a local phone repair shop.
The result was a new phone screen, a white edge just over half way down the screen might be worth noting. The repair man said it was a warranty sticker on the screen they put in. (Sounds silly)
Anyway, the resultant problem is not exactly like what i've seen on many threads.
My phone now decides to press itself erratically. Usually after swiping and trying to press delete on the keyboard would it start acting up.
My remedy: Hard reset(Didn't work), factory reset(didn't work), upgrade from 4.4 to 5.1(I think, newest software) and to my surprise the issue remains. So after the repair man replacing the screen twice and ensuring that i'd done my best with little to no phone knowledge, I still have this problem.
There's many threads detailing problems, some linking to apk's that are "calibration software", some that say you can change calibration.ini but no helpful replies or expanding info on the threads.
Can anyone tell me if they've had any luck with this or anyone who has knowledge of what I should do next (E.g "there's no fix guy, you'll have to sell it and move on") as i'm starting to assume these screens are very tedious to deal with
Remove the plastic protector and put a tempered glass protector
Hey guys
I have a very strange problem with my Huawei P10
About 2 weeks ago, I noticed that two purple horizontal stripes are appearing in a 3-4sec sequence
Normally, I would immediately ask for a repair, but there's a thing which persecutes me: it only happens when I don't touch the screen for longer than 3-4sec
When there's a continuous contact with the screen (e.g when writing a message) nothing happens, everything is fine and dandy, but whenever I leave the screen for itself for 3 or more seconds (e.g when watching a movie), the stripes start to appear every few seconds, and continue until the screen goes dark or until I touch it again, but after touching it it still takes only a few seconds for the stripes to sequentially flicker again
Here's what I've tried so far (no result):
- safe mode
- factory reset
- cache partition wiping
- cord input deep clean
What may be the reason?
Hey.
It's 100% a board or Display issue. send it for repairs. but i believe maybe you've dropped ur phone. Anyways Huawei knows better.
Erfan_rv said:
Hey.
It's 100% a board or Display issue. send it for repairs. but i believe maybe you've dropped ur phone. Anyways Huawei knows better.
Click to expand...
Click to collapse
It's quite complicated
I once dropped it, but even after that, the previous LCD worked fine, there were no errors other than broken glass, so I guess we could exclude a board issue and lean toward your second option, as now that the LCD has been replaced, the fault occurs
What's more, I noticed that if I press the Home Key, and then put my finger in the bottom right corner and hold it, I can still use the whole LCD space without the flickering (I need to press the Home Key first so that it works after I hold my finger in the corner)
It's like the LCD needs to be in contact with your finger all the time to avoid that, which has led me to an idea: would a tempered glass solve that maybe?
fengels said:
It's quite complicated
I once dropped it, but even after that, the previous LCD worked fine, there were no errors other than broken glass, so I guess we could exclude a board issue and lean toward your second option, as now that the LCD has been replaced, the fault occurs
What's more, I noticed that if I press the Home Key, and then put my finger in the bottom right corner and hold it, I can still use the whole LCD space without the flickering (I need to press the Home Key first so that it works after I hold my finger in the corner)
It's like the LCD needs to be in contact with your finger all the time to avoid that, which has led me to an idea: would a tempered glass solve that maybe?
Click to expand...
Click to collapse
I can't really answer for sure but i believe if there's a Huawei service center in your city and you try to fix ur broken huawei, your wasting your time. Whatever solution u apply on ur phone its just gonna be temporary since u hide your problem and not solved it.
Erfan_rv said:
I can't really answer for sure but i believe if there's a Huawei service center in your city and you try to fix ur broken huawei, your wasting your time. Whatever solution u apply on ur phone its just gonna be temporary since u hide your problem and not solved it.
Click to expand...
Click to collapse
I still think (or should I say believe ) that there's a solution which doesn't involve another screen replacement
As for your "temporary solution" mention, I guess if I found one, it wouldn't be temporary, since the fault doesn't progress, it's been the same for a month or so when it first occured, which gives me another reason not to replace the screen and keep looking for other possibilities
I don't need a Huawei service center, I can replace the LCD myself (didn't do that the first time though), but it still involves spending money, whereas I've been looking for unpaid solutions the whole time; getting a new LCD is an extremity
fengels said:
I still think (or should I say believe ) that there's a solution which doesn't involve another screen replacement
As for your "temporary solution" mention, I guess if I found one, it wouldn't be temporary, since the fault doesn't progress, it's been the same for a month or so when it first occured, which gives me another reason not to replace the screen and keep looking for other possibilities
I don't need a Huawei service center, I can replace the LCD myself (didn't do that the first time though), but it still involves spending money, whereas I've been looking for unpaid solutions the whole time; getting a new LCD is an extremity
Click to expand...
Click to collapse
You can ask them to diagnose it and tell you about problem noone makes you pay for a lcd. And after reading your message over and over (And since i repair TVs and everything with electronics inside) i think it also can be your touch or display controller ic. Mostly it could be from touch ic since screen works fine while its in touch with something. But someone has to try your lcd or mb on a healthy one to make sure. which you can't do nothing like that. or do you?
@fengels did You bought original lcd, where can I buy it in good price?
I know this problem from older galaxy series like s5. The fix for this most of the time was disable auto brightness or higher the brightness on auto brightness. Don't know if this is the same problem, but it could be a try. Also don't know which cause this strange problem. Hope it can help you
Syco2oo5 said:
I know this problem from older galaxy series like s5. The fix for this most of the time was disable auto brightness or higher the brightness on auto brightness. Don't know if this is the same problem, but it could be a try. Also don't know which cause this strange problem. Hope it can help you
Click to expand...
Click to collapse
No, it's a different problem, in the galaxy series the whole screen would flicker, whereas in my P10 it's only 2 horizontal stripes appearing in a 4-5 sec sequence whenever I leave the screen untouched for longer than 5sec
Playing around with the brightness doesn't solve that unfortunately, actually no in-device settings do, as I've tried almost every single option which is screen-related, like switching the eye comfort mode on, but still no result
The main reason why I'm still looking for an unpaid solution is that apart from this one error, the phone is like brand new, everything works fine
ok, so if I understad the problem shows up after you replaced the LCD display? So do you really think is more software related than hardware? I personally would send it to diagnose and repair.
DallasCZ said:
ok, so if I understad the problem shows up after you replaced the LCD display? So do you really think is more software related than hardware? I personally would send it to diagnose and repair.
Click to expand...
Click to collapse
The thing is it didn't show up immediately, I had used the phone for some time with no errors before it first occured
Also, since the new LCD was set, I haven't done any physical damage to it, I've never dropped or sunk the phone
Since you guys mostly advise me to send it, I guess that's what I will have to do
fengels said:
The thing is it didn't show up immediately, I had used the phone for some time with no errors before it first occured
Also, since the new LCD was set, I haven't done any physical damage to it, I've never dropped or sunk the phone
Since you guys mostly advise me to send it, I guess that's what I will have to do
Click to expand...
Click to collapse
While you were replacing screen, did you turn your device off and disconnect the battery? and i think cleaning all cables coming from LCD and related sockets on motherboard can help. Use thinner or alcohol and if you wanna use thinner be careful so it wouldn't touch anything except golden contacts. Thinner is dangerous and affects ur phone color and plastic parts.
Erfan_rv said:
While you were replacing screen, did you turn your device off and disconnect the battery? and i think cleaning all cables coming from LCD and related sockets on motherboard can help. Use thinner or alcohol and if you wanna use thinner be careful so it wouldn't touch anything except golden contacts. Thinner is dangerous and affects ur phone color and plastic parts.
Click to expand...
Click to collapse
I did turn the device off, but I didn't take the battery off, since it's strongly glued to the phone's body, and I didn't want to damage it
Anyway, could not taking the battery off really be the reason?
As for cleaning, I did it by simply blowing out all the potential dirt, I'm inexperienced in thinner and alcohol cleaning
fengels said:
I did turn the device off, but I didn't take the battery off, since it's strongly glued to the phone's body, and I didn't want to damage it
Anyway, could not taking the battery off really be the reason?
As for cleaning, I did it by simply blowing out all the potential dirt, I'm inexperienced in thinner and alcohol cleaning
Click to expand...
Click to collapse
I am not sure butbon some phones it damages screen. I've seen this on laptops. But anyways its done. Open ur phone and use alcohol. put 2 drops of alcohol on each socket and flat cable connectors and brush it with a soft brush. u don't want to bent any golden contact. It's last thing u can do to fix it without paying for hardware related stuff.
Erfan_rv said:
I am not sure butbon some phones it damages screen. I've seen this on laptops. But anyways its done. Open ur phone and use alcohol. put 2 drops of alcohol on each socket and flat cable connectors and brush it with a soft brush. u don't want to bent any golden contact. It's last thing u can do to fix it without paying for hardware related stuff.
Click to expand...
Click to collapse
Well, will definitely try it then, but what alcohol? Does it need to be something specific?
fengels said:
Well, will definitely try it then, but what alcohol? Does it need to be something specific?
Click to expand...
Click to collapse
Just regular alcohol that drug stores sell. for using on injection. sorry my English is awful.