hi, when i try to activate hibernation on my x98 with win10, the sysrem crash and at the next boot it try to restore, there is any trick to use hibernation.
in your tablet it work?
the sleep mode function ok
bye
Related
I just finished upgrading to the latest ROM by TuMa.
Everything went fine and the unit booted right up.
Problem is that I can't put the phone in Flight mode, it says that it is in Flight mode but the green light keeps flashing.
same problem for me. the shortcut "flight mode" in programms > tools works better for me.
What happens if you do a soft reset after the ROM upgrade has completed?
Yep, I have the same problem. And indeed the Flight Mode in the Tools menu works fine. I can live with that.
flight mode
Hi :wink:
I have the same problem. But I cannot find that "Tools-Flight mode".. :shock:
Any ideas - where can I get those Tools??
Thank you, Buum
Is there a way to keep the device (Tytn II) from going automaitcaly into standby mode when the GPS is activated regardless of the power setting?
On my older Trinity, whenever I used the GPS, the device would not go into standby mode no matter what the power setting was, and hence GPS will remain working. In other words, even when in power setting i had power off after 1 minute, if the GPS was being used (like Destinator) the Trinity was kept awake until I shut down Destiniator. But this is not the case with the Kaiser. Even if I have Destinator running, the devise will still go to sleep mode.
I use tomtom and when running it won't let the Kaiser go into standby automatically.
I do not know how to do it - but I know it MUST be possible because when TomTom is running on my phone it stays in live bright screen mode.
Bill
omar302 said:
Is there a way to keep the device (Tytn II) from going automaitcaly into standby mode when the GPS is activated regardless of the power setting?
Click to expand...
Click to collapse
I use AE Button plus, which is a button remapping program, but has additional functions that can be assigned to hardware buttons. Check it out. I have set up the PTT button that when I click it twice, it disables the auto-standby function but then the backlight doesn't turn off, so when I click it three times it turns off the backlight to save power. Works like a champ.
I too am wondering the same thing. When using iGo, my phone goes to sleep. Is there a reg setting, or an exception lit I can add iGo to, in order to keep phone awake?
I know it must be possible, since several other programs work that way. For example phone does not go to sleep when using IE, or Core Player etc.
I am also using S2U2, and have added iGo to the exception list there, but that only stopped the phone from locking when it goes to sleep.
Please help.
Thanks!
I solved my problem (actualy workaround) by using MortScript (Keepalive script).
omar302 said:
I solved my problem (actualy workaround) by using MortScript (Keepalive script).
Click to expand...
Click to collapse
Hi:
Thanks so much for your reply.
everytime i start my htc kaiser as soon as it goes to the home screen it freezes...is there anyway that i can open it up in safe mode or something??
spb pocket plus adds a safe mode function but the device has to be able to turn on fully to install it and activate the feature.
Try booting it up without your memory card and sim card inserted and see if that helps.
If not, i guess you'll have to hard reset your device.
Hi,
I am a new Windows Tablet user. For the Windows 10 Teclast X98 Air II (HG9M), there is no "Sleep" mode in the energy management setting. I can only go to turn off screen when press the power button. The problem is once the display turn off, it will activate by finger press on the display. The display is very easy to turn on even I use a cover. Any idea how to prevent the accidentally on the display when idle?
BIOS 2.05
thanks
same problem here, x98 air iii and no sleep modes. powercfg-a reveals there are no sleep modes available. all drivers seem to be installed so I'm really at loss what could cause this
Same here help please!
same here
suddenly today appeared the 'sleep mode' instead of 'hibernate' but the power still makes hibernate on press .... anyone found a solution about this problem?
Anyone please?
Bump!! Please this is very important issue for all of us.
I use this tablet with medical software, and it is very annoying to have the battery drained when the screen is off.
I have found on techtablet site a Power Performance log and still no solution
Having the tablet in sleep mode or hibernation it is very important issue.
Please any of the DEVS having any knowledge about this issue please give us, mortals, the "fire".
Hi guys,
There is a problem with my Teclast X98 Air 3G, namely it got boot loop directly to Windows but I managed it by playing with boot priority options in BIOS.
Once I got boot menu I entered to BIOS once again to check If I didn't leave some mess. Finally I jumped into Save & Exit tab but accidentally I hit with the finger one of those two options on the bottom, either
- Launch EFI Shell from filesystem device; or
- Reset System with ME disable Mode
There was no any prompt messages it immediately started to erasing "something". It took like minute or two and thats it, it turned off and its bricked now. Doesn't stand up, can't get into dnx or anything.
Is there any chance I can recover it without using programmer? What are those options about to do? Any advices?