Non Responsive Display - OnePlus 3T Questions & Answers

Hello, i'm having a very weird problem
I was on OxygenOS Stable rom, then suddenly oneday the middle horizontal half inch portion of my screen wasn't responding. I thought it was maybe a software bug, then tried several ROMS, but didn't work. Then updated to latest open beta and the problem was gone.
But before 1 week the problem started to happen again this time that previous non-responsive part as well as another half inch blow that area. I tried Stable 5.0.2 not worked this time
today i'm going to try some ROMs too, but what's the actual problem is? If it was hardware then how it was fixed previously?
HELP ME PLEASE

I suspect a hardware problem. Flash original rom, factory-reset and, seek repair.
Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk

The digitizer is starting to go. If your not ready for a upgrade you need to order a replacement display assembly and perform surgery....
Sent from my ONEPLUS A3000 using Tapatalk

Related

Touchscreen issues are AWFUL

I love the n7...mostly. I want it to succeed
But the issues where the touchscreen will have dead zones / drop touch / not work properly are killing me!
Is this driving anyone else nuts? I have had two different ones, and they both have the problem.
I'm hopeful that either this will be a software fix, or that there will be a later hardware revision that I can rma for.
But man, this is a big problem!
Edit.....
Here is a post on the problem
http://feedproxy.google.com/~r/AndroidNewsGoogleAndroidForums/~3/ds23baDpkSc/http://feedproxy.google.com/~r/AndroidNewsGoogleAndroidForums/~3/ds23baDpkSc/
Sent from my Nexus 7 using Tapatalk 2
ok, return and get a new one or demand a refund. I doubt no one here thought defects in a product were awesome, contact customer service
Are you not having these issues? I have had them on two different devices... Reports are starting to show up on the blogs.... I figured this was a device wide problem.
Sent from my Nexus 7 using Tapatalk 2
bongostl said:
Are you not having these issues? I have had them on two different devices... Reports are starting to show up on the blogs.... I figured this was a device wide problem.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I'm holding two of them right now, no touch screen issues on either.
_MetalHead_ said:
I'm holding two of them right now, no touch screen issues on either.
Click to expand...
Click to collapse
Im not having any issues either, but i havent played any tegra 3 specific games on it yet.
It only seems to happen sometimes... Particularly bad after playing intense games (dead trigger, e.g.).
Seems worse on the right side for me.
I in fact only took delivery of the 2nd one in the hopes that it wouldn't have the problem.
Sent from my Nexus 7 using Tapatalk 2
No issues here, played a few games and not a prob
Never seen any touch issues myself.
I had the issue this morning after powering up with the charger attached. The right hand side of the keyboard was very unresponsive. I was concerned the rooting I performed last night was contributing to the problem.
After powering off again it seemed to reset and has been working fine the rest of the day.
While it was unresponsive I downloaded a touch test app and it was struggling to see presses over 1/4 of the screen primarily the bottom right when in portrait orientation.
Thankfully it seems to be OK at present.
--
Sent from my Nexus 7 using Tapatalk 2

Touch screen responsiveness "issue"?

From day one with this device, when I touch the screen to say launch an app from the drawer, I can be too quick or light about it. I've not had this issue with other devices, I am often tapping an option on the screen only to have to retap it for the phone to follow instructions. This doesn't seem to positive correlate with os version or rom or kernel.....so then assuming this isn't an issue specific to my device only....where does the issue lie and is it fixable?
Sent from my Nexus 6 using Tapatalk
Have not experienced this issue. You might want to get your piece replaced.
Sent from my Nexus 6 using Tapatalk
gammaxgoblin said:
From day one with this device, when I touch the screen to say launch an app from the drawer, I can be too quick or light about it. I've not had this issue with other devices, I am often tapping an option on the screen only to have to retap it for the phone to follow instructions. This doesn't seem to positive correlate with os version or rom or kernel.....so then assuming this isn't an issue specific to my device only....where does the issue lie and is it fixable?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
If you happen to run stock rom without any kind of screen protectors on top the display and you still have these touch issues, i'm afraid it is a spesific issue with your device.

[POLL] OnePlus 3's manufacturing quality

Hello,
I haven't found yet any thread about this so decided to make one.
Through this thread i'm aiming people who own an OP3.
There are 5 possibles answers :
- No problem, perfect as I wish it was
- No problem, though I thought it would be better
- Software problem, doing some factory reset fixed it
- Software problem that is still here and thinking it's hardware
- Hardware problem so I want to return it asap
By doing this, I hope to see how bad is the manufacturing, or how good it is, because I wonder if this whole 'stop sell' won't affect quality (you know, they have to be fast, some tests were neglected or somehow someway trying to fast up production to handle the orders)
Hope you understand,
Cheers.
NB : Sorry if there are english misspells, not at all native language (third one)
Big thanks to everone who answered ! Wish you a good day
-No problem, perfect as i wish it was
Edit: Its perfect for the price ive paid 360e new... Bought UK after brexit when it was 309£ and the pounds rate to euro it was low
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
No problem, perfect here also. Bought on release day. UK
Sent from my ONEPLUS A3003 using Tapatalk
Will order mine tomorrow, thank you for the feedback ! Cheers guys !
Up about the poll for nowadays after the OTA Update
Perfect. Got on release day as well. Now rooted and running custom ROM and kernel. Never going back!
One thing I've noticed is that OP3's vibration is to loud and sometimes a little irritating, anyone has the same problem?
Perfect, ish. After the first week I discovered a slight spec of lint in my rear camera lens. And on grey/dark screens the right side of my screen is slightly lighter shaded than the left.
Sent from my OnePlus3 using XDA Labs
The build quality is pretty decent, but I will say that a few of us had to deal with screen uniformity issues at first and had to get replacements. This did not turn out to be a permanent issue, but it did put a small damper on my experience.
ibaii said:
One thing I've noticed is that OP3's vibration is to loud and sometimes a little irritating, anyone has the same problem?
Click to expand...
Click to collapse
Use vibration tuner ?
Sent from my ONEPLUS A3003 using Tapatalk
zero mfg issues here, I do wish they had used a larger battery and better camera, but that's not about quality that's about design.
No problems from Spain
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
have to send my OP3 for warranty repair after 2 months even though it was kept in a big case and never dropped. hardware fault

Touch issues

Got my phone this Sunday. I had LG G2 previously. Performance and battery backup wise this phone is comparable to G2. What bugs me is the touch performance. I can't seem to make horizontal swipes work properly. Majority of the time, the phone detects it as vertical swipes.
I then have to scroll down again and very precisely swipe left or right. Anyone else have this issue. Note that the same apps and my swiping methods have worked flawlessly with G2 which I had for more than two years.
Sent from my MI 5 using Tapatalk
Yup even happenes to me... Especially clearing the notifications,...
But it doesn't happen in CM!!!
This is certainy an OS issue, try updating to global beta or, to diagnose the problem, go to developer tools-> show touch information, and if you see some weird shaping lines and not the actual line you drew on the screen, with a little overflow, you might have a hardware problem.
Hope this helps
chiragkrishna said:
Yup even happenes to me... Especially clearing the notifications,...
But it doesn't happen in CM!!!
Click to expand...
Click to collapse
That is absolutely a relief knowing that it doesn't happen to CM. So It's definitely just an MIUI issue. Thanks for letting us know.
The same problem here in my mi5 (rom MIUI 8 Italia based on latest china developer)
Inviato dal mio MI 5 utilizzando Tapatalk
The same problem for me: Mi5 (rom MIUI 8 Italia based on latest china developer).
Horizontal swipes seems too sensitive
I installed cyanogenmod and the touch gestures works Pretty good! Maybe miui 8 calibration has to be patched
Inviato dal mio MI 5 utilizzando Tapatalk
Any news about this issue?
Inviato dal mio MI 5 utilizzando Tapatalk
I have the same problem.
Posted it a while back.
http://forum.xda-developers.com/mi-5/help/flaky-left-swipe-prs-1-t3405140
I suspect it is a hardware issue.
Kag said:
I have the same problem.
Posted it a while back.
http://forum.xda-developers.com/mi-5/help/flaky-left-swipe-prs-1-t3405140
I suspect it is a hardware issue.
Click to expand...
Click to collapse
it isn't hardware issue: I installed Cyanogenmod rom and with it touch sensibility is ok
I also have some issues while using the official miui global rom. But with both, cm13 and cm14.1 everything works flawless! So you should think about flashing it and seeing if its a hardware issue.
droidfan88 said:
Got my phone this Sunday. I had LG G2 previously. Performance and battery backup wise this phone is comparable to G2. What bugs me is the touch performance. I can't seem to make horizontal swipes work properly. Majority of the time, the phone detects it as vertical swipes.
I then have to scroll down again and very precisely swipe left or right. Anyone else have this issue. Note that the same apps and my swiping methods have worked flawlessly with G2 which I had for more than two years.
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
Welcome to the club, I had already a indentical tread like this, same one! To me this touch it's so annoying, because I constantly have to do something on my oneplus x brothers phone and my previously Xperia z5 father's phone, and the touch of then it's so much smoother... If I had knowledge of this issue previously it certainly would have been a deal breaker.. Im waiting for my boot unlocker SMS from Xiaomi... My biggest fear it's that the camera quality be much worst on CM 13, it is??
GabrielMed said:
Welcome to the club, I had already a indentical tread like this, same one! To me this touch it's so annoying, because I constantly have to do something on my oneplus x brothers phone and my previously Xperia z5 father's phone, and the touch of then it's so much smoother... If I had knowledge of this issue previously it certainly would have been a deal breaker.. Im waiting for my boot unlocker SMS from Xiaomi... My biggest fear it's that the camera quality be much worst on CM 13, it is??
Click to expand...
Click to collapse
You are right. Been to CM13, and now back to MIUI 8 because I need the camera quality of MIUI. Well, its just now a matter of preference to me.
I have some problems with touch on my Mi5.
I'am on global developer (official ota) version, and I have sharp lcd on my Mi5.
From time to time, touch is loosing smoothness and look like is ''brooke''/not perform normal.
When this happens, only resete helps.
Right now, 2 days works normal.
Before thet, 10 days was normal, and than problem was there.
Is it any solution, but I want stay with MIUI?
Thanks and best regards.
The touchscreen is not working properly with the Nillkin Tempered Glass applied.
Every time I charge my phone with my Blitzwolf QC 3.0 charger, I have issues with the touchscreen. To resolve this, I need to reboot the phone. After the reboot, the touchscreen response is back to normal.
It looks like the charging changes the way the capacitive touchscreen works. Until I reboot the phone.
StardustOne said:
The touchscreen is not working properly with the Nillkin Tempered Glass applied.
Every time I charge my phone with my Blitzwolf QC 3.0 charger, I have issues with the touchscreen. To resolve this, I need to reboot the phone. After the reboot, the touchscreen response is back to normal.
It looks like the charging changes the way the capacitive touchscreen works. Until I reboot the phone.
Click to expand...
Click to collapse
It happens the same to me, after charging the touch responsiveness most of the time is very slow and buggy, a reboot is needed. I'm on LineageOS and have tempered glass on, but can't remeber which one.
I'm happy to find that somebody else has this issue since I was thinking it was just on my phone, but this seems to be some kind of different issue then.
I can confirm that Xiaomi Mi 5s 3GB 64GB Golden version with Global 8.0.3.0 MAGMIDI Stable has this issue, the touch screen is not reliable, sometimes we try to swype horizontally and it understands a vertical swype, in other hand, it also happens that you touch the screen at one point and it thinks that you were holding the screen on that pointing, popping out a holding option.
I reported on Xiaomi's official forum, it's good to report there in order to get their attention.
DeztMusic said:
I can confirm that Xiaomi Mi 5s 3GB 64GB Golden version with Global 8.0.3.0 MAGMIDI Stable has this issue, the touch screen is not reliable, sometimes we try to swype horizontally and it understands a vertical swype, in other hand, it also happens that you touch the screen at one point and it thinks that you were holding the screen on that pointing, popping out a holding option.
I reported on Xiaomi's official forum, it's good to report there in order to get their attention.
Click to expand...
Click to collapse
The second issue you're reporting happens to me only with xMIUI xposed module, I activated 'expand notification with one finger swipe downward' and I has that issue too, but I don't have it without that module. Could this be your problem?

Screen flickering at high brightness

Hi All,
I've just bought a 256GB Mix. loving it but i've noticed a distracting flickering when the screen is at higher brightness settings. It's hard to describe almost like random dips occur in the brightness.
Obviously auto brightness is off and i've disabled as much battery saving things as i can find.
It persists through different ROMS, tried various MIUI roms, RR, and AICP.
Do i have a dud? Any Firmware updates i can try?
Are you on the newest firmware I believe its 7.12.21
Sent from my MI MIX using Tapatalk
BigM69 said:
Are you on the newest firmware I believe its 7.12.21
Sent from my MI MIX using Tapatalk
Click to expand...
Click to collapse
Unsure how to check? Currently rocking MIUI9 Globe Rom.
paulrgod said:
Unsure how to check? Currently rocking MIUI9 Globe Rom.
Click to expand...
Click to collapse
I'm not sure how to check either. Sorry man wish I could help you. I'm sure there are ways of checking though.
Sent from my MI MIX using Tapatalk
Have you found the solution? I bought one recently and noticed it too
phuctran51 said:
Have you found the solution? I bought one recently and noticed it too
Click to expand...
Click to collapse
Nope, I never did find a solution. I just have the brightness around 90%, it doesn't seem to do it around that. It's plenty bright at that so I'm happy. Considered sending it for RMA but couldn't be bothered with it being a Chinese seller, just thought it would be too stressful..
I'm considering upgrading to a Mix 2s soon anyway..
I have a similar problem on Xiaomi 4A, it looks like this video (iphone right): Youtu.be/Q6CANkiPkUM
Do you have a similar flicker?
Replacement screen for what 80 bucks
Perhaps the problem is not in the screen, but in the power supply pwm - inductor, capacitor
Hello I've redmi note 5 pro i also have same issue past few months but i didn't get any solution. when my phone brightness will high then screen flickering too fast and this issue is too much trouble. So please any one have any solution please let me know.

Categories

Resources