This metal part at the top of the phone got loose and is now missing. Where could I get a replacement part? Tried to Google but couldn't find one.
Related
Ok so corner of my bottom cap started to peel of.. its small thing but it makes me mad so Ive ordered navi cap from the internet.. disambled diamond and removed complete bottom keypad but I cant figure out how to that replace cap. I found HTC Touch Pro manual where they say something about putting it to oven for 5min.. Guess its glued but my question is how I could put new bottom keypad cap back ? Glue I guess but how exactly anyone have done that ?
I bought a used HD2 which is missing screws. The screen is popping off slightly from the phone body in several locations. Every time I press on it it pops back into place and then pops back out when I let go.
I took off the battery cover and at least 2 screws are missing. One in the top right hand corner and one in the lower left hand corner. Of the two screws still there, one is a regular philips head and the other is a security hex (is this normal?) The seller said they had taken it to a cellular repair place to fix a problem with the phone getting stuck at the unlock screen. I believe they misplaced the screws.
Is there anywhere I can buy a replacement set? Will I have to disassemble the phone further to fix the screen popping out?
Thanks!
UPDATE: After watching a video of HD2 assembly which I cannot link to because I a "new user" I believe the P/N of the screws I need is 72H03652-XXM.
No one knows? I can't believe the screws are unique to the HD2.
I am planning on buying the bottom door for my nexus one from ebay since mine's a little beat up, but I want to know if it's possible to remove the contacts from the door that I own as a lot of the ebay auctions for the door appear to not have any contacts in place.
Otherwise, can anyone recommend me a place to buy one with the contacts?
Lastly, does anyone know if the chip for GPS or AGPS is located on the flex cable? (the piece which has the power button, headphone jack, and the black piece with square gold contacts running down in two lines) I just replaced mine and I don't know if the GPS connection got worse or not, but I am unable to get a lock on my phone.
I think the cover just had holes in it, and the contacts poke through from the inside. Remove the cover, and the contacts will still be on your phone...
danger-rat said:
I think the cover just had holes in it, and the contacts poke through from the inside. Remove the cover, and the contacts will still be on your phone...
Click to expand...
Click to collapse
Not the case on my phone, the contacts on the cover touch contacts on the motherboard but they aren't physically attached. They are physically attached to the cover, and I cant think of an easy or non destructive way to remove them. Thanks for replying though
The front panel on my Z3 Compact started coming off from the top left corner few weeks ago. I got a replacement adhesive from AliExpress today and I'm trying to figure out how to apply it. In all replacement videos, they remove the back panel too to disconnect the screen ribbon. Is it necessary if I'm only replacing the adhesive and keeping the same screen?
Also, how would I go about the repair? Remove the back panel, disconnect the screen ribbon, remove the front, put in the replacement adhesive, press in the screen, heat together, then reassemble the back using the same method?
Just wondering if anyone here has had any luck replacing the front panel on the phone?
My phone took a drop yesterday and smashed the top corner, At first there was distortion on the screen and colour placement was wrong.
But after lifting the crack / broken glass part, it appears to have corrected itself.
This making me think its just the front Panel that is damaged.
replacing the screen is £150-£200 here in the UK
But replacing just the front panel is about £20
I know the phone is pretty much glued together, so has anyone had any experience or know of anyone who has successfully removed and replaced the front panel?