Morning All !!
Currently i have the HTC fuze (AT&T) aka Diamond. I just purchase the sony bluetooth headset DR-BT160AS. I have tried everyway possible i can think of to get more sound out of these headphones. It sound like im listening to music threw a bottle next door in MONO. I tryed adjusting the preset ( audio booster) with the help of tweaksdiamond. Nothing but here the knock why is it when i have the audio adapter plug into the phone i can get great sound and adjust the presets, But threw the bluetooth i get mono sound with no adjustments. Its pairs wirless headset, hands free, it work the fucntions of changing the track and adjusting volume and i can recive calls.... but with poor sound.
programs used :
blue audio
tweaksdiamond
Has anyone had this issue using wirless bluetooth stereo headsets w/a2dp enabled.
@LPHAR56 -aka- do you hear me now "HELL NO!"
I have a pair of Sony DR-BT140Q and they work/sound really great every time. They're not the same kind, but maybe yours are defective?
Try pairing it with a laptop or any other device to see if you get the same results
thanks i try to do it with a laptop. if i can see if it just my pair having issues.. just can figure out the issue
Hey everybody, my friend recently gave me his old yamaha receiver. the model is RX-V2095. I got the speakers to work but it only works when the effect [on] mode on the receiver is turned on. Problem is it sounds extremely bad and i would like to adjust my own bass and treble settings. im using a rca female cable and connecting a 3.5mm jack from my phone to the end of the rca cables which are connected to my receiver.
nty123 said:
Hey everybody, my friend recently gave me his old yamaha receiver. the model is RX-V2095. I got the speakers to work but it only works when the effect [on] mode on the receiver is turned on. Problem is it sounds extremely bad and i would like to adjust my own bass and treble settings. im using a rca female cable and connecting a 3.5mm jack from my phone to the end of the rca cables which are connected to my receiver.
Click to expand...
Click to collapse
you should try to turn off Beats audio and use a custom EQ instead and see if it sound better. Everytime I plug my phone to my Pioneer receiver, it sound extremely bad when beats audio is enabled (way to much bass and treble = sound distortion) Fortunately, I have a good built-in 10-bands EQ in my receiver so I don't really need and custom EQ in my phone. But your receiver doesnt seem to have a descent EQ (only 2 bands).
alray said:
you should try to turn off Beats audio and use a custom EQ instead and see if it sound better. Everytime I plug my phone to my Pioneer receiver, it sound extremely bad when beats audio is enabled (way to much bass and treble = sound distortion) Fortunately, I have a good built-in 10-bands EQ in my receiver so I don't really need and custom EQ in my phone. But your receiver doesnt seem to have a descent EQ (only 2 bands).
Click to expand...
Click to collapse
thanks ill try that, but i think i figured it out. I don't have the remote for the receiver so i can't get it setup and configure the settings within it. any idea how i can do this? is their another remote that can control it to?
nty123 said:
thanks ill try that, but i think i figured it out. I don't have the remote for the receiver so i can't get it setup and configure the settings within it. any idea how i can do this? is their another remote that can control it to?
Click to expand...
Click to collapse
well use the IR of the phone!
Hello again
Really often I use my phone as a media player, especially in my car, connected via headphones cable. Until now all works fine with all my devices, but with the Maze Alpha the sound is just in mono (left side) - with any app. In the android settings I disabled the sound reinforcement options but nothing is changed.
I know that the speaker plays sounds just in mono, but I found no hints in reviews that this is the same for headphones. If this device generally not able to play sounds in stereo, is this a big fail for the manufacturer.
So please check my issue and give me a feedback. I'd also be happy if someone can tell my a solution for this to get real stereo sounds.
Many thanks in advance and best wishes
Dan
Headphone jack
Same issue here only one chanel
I haven't try to use it directly with large speakers though. It seems that you might need an amplifier to get the right sound despite defaulting to a stereo sound system only. The secret is to sound issue in Maze Alpha is to get quality earphones.
Hey guys, I've recently bought an Honor Play, really happy with the device but just got a pair of bluetooth headphones, Mixcder E7
the bluetooth audio quality is really bad and it crackles, I've tried changing the codec from the developer settings but it appears these headphones only support SBC
I doubt the codec is the reason why the audio is crackling though, does anybody have any suggestion?
(it sounds perfectly fine using the headphone jack)
Thanks in advance
Alex
alextana said:
Hey guys, I've recently bought an Honor Play, really happy with the device but just got a pair of bluetooth headphones, Mixcder E7
the bluetooth audio quality is really bad and it crackles, I've tried changing the codec from the developer settings but it appears these headphones only support SBC
I doubt the codec is the reason why the audio is crackling though, does anybody have any suggestion?
(it sounds perfectly fine using the headphone jack)
Thanks in advance
Alex
Click to expand...
Click to collapse
I would try changing any settings you can on the headphones and see what happens. For example, my headphones offer a choice of Bluetooth standards; the ability to favour sound quality over stability etc. Additionally, see if this happens away from sources of 2.4ghz noise such as microwaves. Don't surf at the same time, or try and use 5ghz WiFi.
alextana said:
Hey guys, I've recently bought an Honor Play, really happy with the device but just got a pair of bluetooth headphones, Mixcder E7
the bluetooth audio quality is really bad and it crackles, I've tried changing the codec from the developer settings but it appears these headphones only support SBC
I doubt the codec is the reason why the audio is crackling though, does anybody have any suggestion?
(it sounds perfectly fine using the headphone jack)
Thanks in advance
Alex
Click to expand...
Click to collapse
Are you already try to pair that headphone to other device to check the sound? I'm have a bluetooth earphone and the output sound is normal on my Honor Play ?
junkiespam said:
Are you already try to pair that headphone to other device to check the sound? I'm have a bluetooth earphone and the output sound is normal on my Honor Play
Click to expand...
Click to collapse
Yeah it works fine on my laptop via Bluetooth but still getting crackling sound on my phone
My headphones don't have any settings besides active noise cancelling and volume
?
alextana said:
Yeah it works fine on my laptop via Bluetooth but still getting crackling sound on my phone
My headphones don't have any settings besides active noise cancelling and volume
?
Click to expand...
Click to collapse
Try to unpair and pairing again or try to reset network settings.
Go to Settings > System > Reset
Click on Reset Network settings
Confirm Reset Settings
junkiespam said:
Try to unpair and pairing again or try to reset network settings.
Go to Settings > System > Reset
Click on Reset Network settings
Confirm Reset Settings
Click to expand...
Click to collapse
Resetting the network setting helped my headset out. I dunno bout OP tho.
Hi, I have an honor play and bought wireless headphones and I'm running into this problem as well... Have u found a solution? thanks
Hello all,
Have been using non EMUI ROM's for a while now as I'm sure many of you have as EMUI isn't everyone's favourite cup of tea.
One thing missing is the stereo speakers which although doesn't break functionality it certainly wouldn't be a terrible idea to have it working.
Anyone have any ideas on how to fix it?
@kessaras @moto999999
If you guys have any thoughts i and many many others would greatly appreciate your input and help with getting it working.
Any testing you need, im here as I'm sure others will be.
Many thanks in advance.
:good:
What's the problem? I haven't noticed anything, maybe I haven't observed it as mainly use my Bluetooth headphones.
Is it on Bluetooth output? Or UBC C to jack? Or the phones direct speaker?
please explain. what exactly do i connect to reproduce the issue ?
just stereo speakers or a headphone will do ?
wireless ? or
directly type C or i need a type C to audio jack adapter ?
or a type c to usb adapter ?
I think it stands for the internal speakers. On EMUI they were playing together in stereo, on aosp roms only the bottom speaker plays while listening to the music or playing a movie.
kessaras said:
please explain. what exactly do i connect to reproduce the issue ?
just stereo speakers or a headphone will do ?
wireless ? or
directly type C or i need a type C to audio jack adapter ?
or a type c to usb adapter ?
Click to expand...
Click to collapse
Headphones for me are fine.
Bluetooth is fine.
It's just the normal stereo speakers on the phone.
Only one works..
djlukas1983 said:
I think it stands for the internal speakers. On EMUI they were playing together in stereo, on aosp roms only the bottom speaker plays while listening to the music or playing a movie.
Click to expand...
Click to collapse
Correct
dladz said:
Headphones for me are fine.
Bluetooth is fine.
It's just the normal stereo speakers on the phone.
Only one works..
Click to expand...
Click to collapse
Ok . I think you don't understand.
Audio takes routes.
From kernel to Hal to framework to app to user it goes through many many routes.
I need the whole route.
Can you be specific clear or not ?
I can't just buy any available combination in the market and test them all, I don't have the money for that or the time.
So.
You connect with type C ?
Type C to jack ?
Type C to usb ?
Then you connect what ?
Just speakers ?
Audio jack to two speakers ?
Type C to speakers ?
Do the speakers have an amplifier , so you connect from :
jack to amplifier and then the amplifier to speakers ?
Type C to amplifier and then speakers ?
Help me understand the whole route or debug it yourself.
There are more than 50 audio routes.
Be specific clear !!!
this phone have two speakers, one at the bottom, one at the top...
if you listen to anything, only the bottom one works, not the top one...
speakers, headset and whatever, connected via bluetooth or usb, works just fine
it's just the speakers on the phone
don't know how to be more clear, apologies
kessaras said:
Ok . I think you don't understand.
Audio takes routes.
From kernel to Hal to framework to app to user it goes through many many routes.
I need the whole route.
Can you be specific clear or not ?
I can't just buy any available combination in the market and test them all, I don't have the money for that or the time.
So.
You connect with type C ?
Type C to jack ?
Type C to usb ?
Then you connect what ?
Just speakers ?
Audio jack to two speakers ?
Type C to speakers ?
Do the speakers have an amplifier , so you connect from :
jack to amplifier and then the amplifier to speakers ?
Type C to amplifier and then speakers ?
Help me understand the whole route or debug it yourself.
There are more than 50 audio routes.
Be specific clear !!!
Click to expand...
Click to collapse
I have no idea what you're asking dude..
In fact I have already been as clear I can be.
To reiterate..
With the p20 pro with pie installed..
If you play music with just the phone! As I said just the stereo speakers that are built in..
You will have audio coming out of the earpiece and the speaker at the bottom, the bottom being right and the top being left..
There are no usb C or otherwise connected, as I said headphones, usb, Bluetooth all work fine, in which case anything else you connect would also work fine..
This is solely for the phones actual output, not sure where the confusion is mate??
Do you have the pro? If you have it and have your ROM or any other non emui ROM installed you'd know exactly what I'm saying.
Hasn't anyone mentioned this in your ROMs thread??
Any audio from the device usually (with emui) comes from both speakers, top and bottom (on the phone, nothing external)
With non emui ROMs this does not happen.
I've no idea how to debug where the break down is.. specifically within the devices software... which is why I'm asking for help.
kaiowas82 said:
this phone have two speakers, one at the bottom, one at the top...
if you listen to anything, only the bottom one works, not the top one...
speakers, headset and whatever, connected via bluetooth or usb, works just fine
it's just the speakers on the phone
don't know how to be more clear, apologies
Click to expand...
Click to collapse
There is no way to be more clear, it's blatantly obvious what the problem is mate.
As in the internal speakers, not some external, amplified or otherwise externally connected speakers.
dladz said:
There is no way to be more clear, it's blatantly obvious what the problem is mate.
As in the internal speakers, not some external, amplified or otherwise externally connected speakers.
Click to expand...
Click to collapse
Ok now I finally understand. I never noticed anything like that because when I disassembled two p20 pro to change lcd (at work, because I'm a mechanic normally) I never saw a speaker up there. We only have one below.
In some reviews I read that p20 pro can create a Dolby surround effect.
Maybe the Dolby effect confused you ?
And no actually nobody else ever said anything. It's just you since I did my first build until now ?
Edit:
To add more,
If Huawei in closed source audio Hal has some way to create a Dolby surround effect , then that's something we can't do unless Huawei shared the Hal.
Absolutely no idea about Dolby.
Doesn't confuse me at all, just the left (earpiece speaker) doesn't work..
I think Luk got it to work. Could be wrong.
dladz said:
Absolutely no idea about Dolby.
Doesn't confuse me at all, just the left (earpiece speaker) doesn't work..
I think Luk got it to work. Could be wrong.
Click to expand...
Click to collapse
That's true! On Emui the left sound is coming from the earpiece speaker and the right sound is coming from the bottom speaker. The option is called Stereo +
When the phone is on landscape orientation the audio is switching from mono to stereo
dladz said:
Absolutely no idea about Dolby.
Doesn't confuse me at all, just the left (earpiece speaker) doesn't work..
I think Luk got it to work. Could be wrong.
Click to expand...
Click to collapse
nikifeto said:
That's true! On Emui the left sound is coming from the earpiece speaker and the right sound is coming from the bottom speaker. The option is called Stereo +
When the phone is on landscape orientation the audio is switching from mono to stereo
Click to expand...
Click to collapse
i see. no i can not do that. i can not create a stereo + effect by routing the left sound to earpiece and right sound from speaker.
what i can do is make the earpiece play sound too just like the speaker , but i don't know how bad the quality will be because the earpiece is not strong like the speaker.
I will keep that in mind , when i have time i will change the routing and test it at mine.
kessaras said:
i see. no i can not do that. i can not create a stereo + effect by routing the left sound to earpiece and right sound from speaker.
what i can do is make the earpiece play sound too just like the speaker , but i don't know how bad the quality will be because the earpiece is not strong like the speaker.
I will keep that in mind , when i have time i will change the routing and test it at mine.
Click to expand...
Click to collapse
One good thing we know is, is that the earpiece is capable of being used as a speaker.
A lot of devices with only one speaker have had mods in the past which have enabled the earpiece as a second speaker but some have caused damage over time, this shouldn't be the case for us.
Nice one. I think the quality will be great.
If we can match up the Vol level and emulate the output specifically Vs the emui one then we'll be sorted.
@kessaras whatever you can do would be amazing mate
kessaras said:
Ok . I think you don't understand.
Audio takes routes.
From kernel to Hal to framework to app to user it goes through many many routes.
I need the whole route.
Can you be specific clear or not ?
I can't just buy any available combination in the market and test them all, I don't have the money for that or the time.
So.
You connect with type C ?
Type C to jack ?
Type C to usb ?
Then you connect what ?
Just speakers ?
Audio jack to two speakers ?
Type C to speakers ?
Do the speakers have an amplifier , so you connect from :
jack to amplifier and then the amplifier to speakers ?
Type C to amplifier and then speakers ?
Help me understand the whole route or debug it yourself.
There are more than 50 audio routes.
Be specific clear !!!
Click to expand...
Click to collapse
P20 Pro have stereo internal speaker... see picture
he only works one out of 2 on non-emui system
i using factory emui system, it works for me in stereo channel
spityu85hun said:
P20 Pro have stereo internal speaker... see picture
he only works one out of 2 on non-emui system
i using factory emui system, it works for me in stereo channel
Click to expand...
Click to collapse
Please...... -_-
in your picture i see the earpiece, not the speaker.
If it was a speaker then how do you hear the opposite side when you make a phone call ?
"Earpiece" it's called, not speaker.
In EMUI they create a stereo effect by using the earpiece to play music.
If you so much want this , then ask Huawei to send me link to their sources, hals and framework, end of story.
Me i said already , the only thing i can (Maybe i can) , is to add a route for the earpiece to also play music just like the speaker. I can not produce the stereo effect of EMUI.
I do not have the code for that and i don't know how to write the code for that.
spityu85hun said:
P20 Pro have stereo internal speaker... see picture
he only works one out of 2 on non-emui system
i using factory emui system, it works for me in stereo channel
Click to expand...
Click to collapse
Can't do exactly that without files from Huawei mate, which they won't release.
But he can maybe do it another way.. The result will probably be the same so let's just see what can be done..
kessaras said:
Please...... -_-
in your picture i see the earpiece, not the speaker.
If it was a speaker then how do you hear the opposite side when you make a phone call ?
"Earpiece" it's called, not speaker.
In EMUI they create a stereo effect by using the earpiece to play music.
If you so much want this , then ask Huawei to send me link to their sources, hals and framework, end of story.
Me i said already , the only thing i can (Maybe i can) , is to add a route for the earpiece to also play music just like the speaker. I can not produce the stereo effect of EMUI.
I do not have the code for that and i don't know how to write the code for that.
Click to expand...
Click to collapse
you are wrong...
p20 pro have 2 speaker's
https://forum.xda-developers.com/huawei-p20-pro/help/speakers-t3800876