No progress beyond Boot Screen!!! - MDA III, XDA III, PDA2k, 9090 Software Upgrading

hai dudes....
my roommates is using O2 for a long time and all in sudden he couldn't able to go beyond the boot screen, his PPC hangs there. I have also tried to connect it to pc thru' active sync.. but unsuccessful (tried soft reset too for many times).... now what is the option to get into.... (i feel he is running out of space and the O2 couldn't able to load files!!!!! this is my doubt... i may be wrong.....) is there any option to overcome this.. without reinstalling everything.......
or if reinstall is the only option to get a ride... how shall that can be done.... plz help...... he is having a backup of his OS image (saved using OSImagetool....)
plz help how to proceed...... to solve this....

You could always try a 'Hard Reset'... on WM2003SE I think it's press and hold the Power Button then press the Soft Reset 'Hole'...
That should reset everything to factory settings...

if it doesn't work you will need to reflash the rom. Read the wiki for info on how to do this or go to your phone manufacturer's website and download the latest upgrade.
Either way you are going to have to reinstall everything.

yes.. thanks for you quick response.... i will first try as you mentioned spkr4thdd.. and if still its not working will go and flash the rom. i have already downloaded the updated rom.... but i have a doubt here.... does it enough to connected with PC thru USB to Flash the ROM.... or need to have any other utility or software to do the same from PC.....
plz friend... any step by step guidance (or web links) will be greatly helpful.. as the piece is out of waranty/garenty period..... taken all the necessary precausionary steps to pervent from loss.... plz help....
thanks much..

Related

HELP!!! phone not working

I REALLY NEED HELP...
i was updating the rom to 2.21 and i guess i accidently closed the program.. sooo now my phone turns on to this screen.. it shows 3 colors.. i can not do anything..
i really need help.. what can i do to go back?
Ok, there's a chance that you just turned your phone into a nice little paperweight however, I recommend trying two things. First, try to perform a hard reset by following these steps:
1: Press and hold both the Comm Mannager Button and the Voice Command Button
2: While keeping those two buttons pressed, press the Reset Button with your stylus
3: After about a second you will be prompted for confirmation. Press the Talk Button to confirm
If that fails, try performing the ROM upgrade again. If THAT fails...well either my assumption is correct or you're gonna need someone more proficient than me to help you ^_^
i tried doing that.. that didnt work..
when you try to install the rom again.. the phone has to be connected with active sync.. and right now its not.. but if u look at the screen on the phone.. it says usb.. but it doesnt connect..
so idk what to do now..
i have another mda..
this one has the original ROM and it works.. is there anything i can do?
please help
harut9161 said:
i tried doing that.. that didnt work..
when you try to install the rom again.. the phone has to be connected with active sync.. and right now its not.. but if u look at the screen on the phone.. it says usb.. but it doesnt connect..
so idk what to do now..
i have another mda..
this one has the original ROM and it works.. is there anything i can do?
please help
Click to expand...
Click to collapse
If you have the bootloader screen(rainbow) it should be retrievable.
Just to be sure you enter the bootloader screen hold camera button and turn on.
The device should be able to connect to your pc, but not by activesync.
If it wont try disabling any firewalls or antiviral on the pc and try again.
Once the pc recognizes your device - run the rom upgrade again.
Fan-freaking-tastic!!!!
Thanks meschle !!!!
I had loaded a cingular rom onto a tmobile thinking all HTC roms should work alike (i know idiot sign is already on my forehead) and the phone was working but very slowly and sync did not work...
I checked and I could get to the bootloader screen (rainbow) as you suggested and then was able to load the original firmware just fine... Phew.. Saved my having to explain a $500 brick to folks.. lol
I have a question on this however, if I want to upgrade the radio or something other than T-MOBILE rom.. what do I need to look for to be sure it will work on my T-MOBILE ?
Cheers
and Thanks

A Big Problem with HTC Wizard

Hello. I was flashed my Wizard,but I have a general problem. When I try to start Windows, always start Align Screen, but Windows didn't start. I reflash my pocket, but the situation is a same. I think that I'm lost my BootLoader on PDA and the Wizard is unrepaired. I want somebody to help me, please?
bootloader
you can go into bootloader by soft reseting and holding the camera button down at the same time it will the show a multi colour screen that is bootloader mode
download your network providers official rom re flash it then is hsould bo ok
otherwise use a rom called wizard love i have seen use on many threads and it usually get people out of trouble search for it on goole
or if you have onshare i have the rom you can download my id is easymob same as the forum
http://www.onshare.com/en_gb/download/
What ROM did you flash with?
mordo said:
Hello. I was flashed my Wizard,but I have a general problem. When I try to start Windows, always start Align Screen, but Windows didn't start. I reflash my pocket, but the situation is a same. I think that I'm lost my BootLoader on PDA and the Wizard is unrepaired. I want somebody to help me, please?
Click to expand...
Click to collapse
You need to provide more details if you want help... what ROM version were you flashing? What provider? What was your IPL/SPL?
This is a beginner's mis conception. I was having the same problem. Eventually I found out that I need to keep holding the stylus on the screen for at least 6-8 seconds. Then the pointer will start moving. So it was not "tapping".

T5355 stuck on "TOUCH Diamond2" screen

Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355
Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
I don't think you would be experiencing these problems with an original topaz
Please take care this is a HTC CLONE
Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643
run with a rom in bootloader, it shud work
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.
If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?
Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.
My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".
nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !
help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?

upgrade help

I need help upgrading my XDA IIs from wm5 to wm6. pls help. have tried the steps show in some forums but having trouble with the BaUpgradeUt.
have heard that i could install using the SD. which is much easier.. kindly show me the link to this steps pls.
thanks
sd card flashing does not work for the blueangel. please follow the steps in my tutorial thread linked in my signature. and don't use the baupgrade, but my Chef_Tony RUU's maupgradeut_noid. that should do the trick
im using win 7 and i cant connect to the BA when its in the bootloadermode (is shows usb) but i cant connect using my windows mobile device center (Activesync for win7)
as a beginner, you shouldn't attempt to flash using a windows vista/7 computer, because it is much more complicated than the regular process and takes a lot of extra knowledge.
if you see absolutely no way, that you can access a windows xp pc, you can try the methods described in this post: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
thanks for the help. now im facing a new problem regarding to some errors i encountered in this version.
cant use my sim contacts and i cant even add a new contact to the directory?
issues like that usually appear, when the user forgot to perform a proper hard reset.
hmmm? so what can i do??
perform a proper hard reset by pressing power+reset, then camera+record and in the menu that appears, change the options to read:
ernable kitl NO
clear registry hive YES
format storage yes and confirm with the mail button. then the device will start the first boot, where you set the clock and stuff like that. this step is mandatory to each upgrade process and is therefore mentioned in all the tutorials

ba update

Hy!
I have a ba with broken power button. The button has rend a pace of motherbord. How can i update my rom without this? Can i turn on the bootloader mod by shoftware? How can i repair it?
(i can't speak eglish, but i try it! )
thx!
hi and welcome to the forum!
there are several things that come to mind:
1. in my signature there is a link to the htc blueangel service manual that can help you fix your power button, because sooner or later, you might need it.
2. assuming that you already use a wm5 or higher rom, before attempting to upgrade you can try a dry run and try to put the device into bootloader mode by running enterbl.exe on the device (it comes with every RUU), then without upgrading you perform a soft reset to restart it and then try a hard reset with only reset+camera+record and see if the menu shows up. then you are good to go.
3. if you are running wm2003, you should check, whether your rom is already WWE, you might be able to upgrade without putting the device into bootloader mode before beginning.
please post back if any of that worked. if not, i still have an idea involving mtty, but i would have to look it up first and maybe it is not necessary.

Categories

Resources