Database Develop

How to backup ROM?

Is there a utility to do this? Does it backup onto SD card?
Yes there is
http://forum.xda-developers.com/viewtopic.php?t=43399

Anyone got any backed up roms I can use?
My Vario is locking up at the spash screen and I read somewhere here that if you ntrw back onto the sd card a rom image it should fix it.
Problem is I didn't back up my rom before i started to play!

Hmmm, without wanting to state the obvious why don't you just flash the latest T-Mobile ROM onto your device? There are several options from T-Mobile linked in recent threads.
All you really need to do is get the device into the bootloader (the bootloader can be entered by holding the "Camera" button while resetting) then run the suitable ROM upgrade on a PC with the Vario attached.
No need to mess with unlocking, CID issues, custom ROM's and the like just to get the device up and going again .
This is assuming that you have mangled the OS like your post suggests (and it's getting past the 1st splash suggesting the bootloader is still in tact).

djwillis said:
Hmmm, without wanting to state the obvious why don't you just flash the latest T-Mobile ROM onto your device? There are several options from T-Mobile linked in recent threads.
All you really need to do is get the device into the bootloader (the bootloader can be entered by holding the "Camera" button while resetting) then run the suitable ROM upgrade on a PC with the Vario attached.
No need to mess with unlocking, CID issues, custom ROM's and the like just to get the device up and going again .
This is assuming that you have mangled the OS like your post suggests (and it's getting past the 1st splash suggesting the bootloader is still in tact).
Click to expand...
Click to collapse
I have flashed it with about 5-6 different roms from the ftp site but none get past the spash screen .. I read the following post http://forum.xda-developers.com/viewtopic.php?p=227676&highlight=format+failed#227676 and hence my need for a backup sd version.
r,
j

Ok,
Care to post up ALL versions of the ROM parts currently on your system to this thread?
IPL, SPL, Radio, OS etc.
I assume you have no problems flashing from the boot loader then just geting the flash to work?

djwillis said:
Ok,
Care to post up ALL versions of the ROM parts currently on your system to this thread?
IPL, SPL, Radio, OS etc.
Click to expand...
Click to collapse
MrClean_RUU_WIZARD_224_AKU23_WWE.zip
TMGER_original_ship_1_3_2_5.zip
RUU_Prodigy_1060204_105_11210_TMO_UK_Ship.exe
Qtek_9100_1_6_7_ENG.zip
Era_RUU_Wizard_AKU2.3_Custom_A2DP.rar
K-JAM_WWE_216901_2169101_020710_ship.exe
And I even tried the sd backup "sdcard_backup_wizard_tmob_dutch.zip" but when I boot up the wizard it doesnt recognise it ( i did the whole ntrw write thing)

djwillis said:
Ok,
Care to post up ALL versions of the ROM parts currently on your system to this thread?
IPL, SPL, Radio, OS etc.
Click to expand...
Click to collapse
IF I turn the wizard on now it hangs on the imate screen with
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1
J

joker3001 said:
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1
Click to expand...
Click to collapse
Cool, so the iMate ARU2 ROM. Let me see if I can't cook up a ROM with no bootloader (so we don't make things worse) and give that a try.
Just to confirm is it the ROM info splash it locks on or the Windows Mobile splash (i.e. does it really boot the OS then bale or just freeze init'ing the OS.

djwillis said:
joker3001 said:
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1
Click to expand...
Click to collapse
Cool, so the iMate ARU2 ROM. Let me see if I can't cook up a ROM with no bootloader (so we don't make things worse) and give that a try.
Just to confirm is it the ROM info splash it locks on or the Windows Mobile splash (i.e. does it really boot the OS then bale or just freeze init'ing the OS.
Click to expand...
Click to collapse
It fails at the Imate screen .. never gets to the os. I presume it failing somehow loading that up.
Thanks for this mate
R,
J

djwillis said:
joker3001 said:
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1
Click to expand...
Click to collapse
Cool, so the iMate ARU2 ROM. Let me see if I can't cook up a ROM with no bootloader (so we don't make things worse) and give that a try.
Just to confirm is it the ROM info splash it locks on or the Windows Mobile splash (i.e. does it really boot the OS then bale or just freeze init'ing the OS.
Click to expand...
Click to collapse
Hi Mate, Any joy?

All fixed now. I copied a friends wizard to sd using the procedure in the link above and then dumped that image onto my wizard.
Sorted now .. phew .. balls can drop back into place now!
R,
J

Can anyone post images of an sd backup of a working rom? - I have acquired a k-jam that is doing exactly the same thing!

where can I find sd buckup which help me revive my wizard. Please show me the link where is the sd buckup.

Dear Friend
I have problem that my xda mini s stuck on O2 screen, could you help me step by step.
Thank you so much
my mail : [email protected]
Thanks friend
joker3001 said:
All fixed now. I copied a friends wizard to sd using the procedure in the link above and then dumped that image onto my wizard.
Sorted now .. phew .. balls can drop back into place now!
R,
J
Click to expand...
Click to collapse

i too want sd backup of k jam
my email address is
[email protected]
plz send it to me

I SOLVED MY PROBLEM WITHOUT SD CARD BACKUP
i found one sd card backup from another kjam but when tried to load that dump on my phone it gave an error ( update not allow) so finally i downloaded the custom rom file from ftp site and loaded into phone which let me past the boot screen and then i used lockwiz method to unlock cid. Now i can upgrade to any latest rom. I ve downloaded one from ftp and my mobile is working fine now but with one problem which i think is some harware issue.
when i put my mobile on charging it just hangs there and when i remove the charger the screen gets white and my mobile reboots.
can someone tell me how to solve this problem?
Thanks

I have a qtek9100 with same problem, can someone send me a backup?
It´s really urgent... pls send me to [email protected]
Much appreciated

please help me!!!!!

this is my first post...i try to change a rom from wm 5 era na wm6 pl.firstly ,i unlocked my mda compact 2 program which is called" lokiwiz03a" and it was ok...aftar tha i find a polish rom in
http://rapidshare.com/files/41548391/WM6_PL.rar
pass: mobilepc
and a try to change my rom - "awizard-v1_3beta2_475"and now is almost dead my mda....after few minuts sth happened w connection- my pc was turn off...and mda was stuck....a reset both..now i have only splash screen
ipl 2.06
spl 2.06.0000
gsm 02.19.21
os 4.0.0.0 ?????and this is one of the problem ...
next i dont have any connection with pc..i don't no what to do.....;-((((((i know that is same program shell tool...but i don't know where to find i and how to use.......any roms which i have don't work because i don't have any connection with my pc(error connection problem)...how to have my win5 or another win 6 back.....i have bootloader...but i don't no how to use....i don't have any connection with pc..some aplication of rom didn't work on vista 64 bit ((((please help me!!!!!!!!

hi
try this
http://forum.xda-developers.com/showthread.php?t=320390
second post have same problem as you today and i fix it on this way
jerry

Restart after Upgrading

i did know how to downgrade or go on to bootloader mode to reflash did any one can tell me how i can do becouse my device is make self restarting
p.s . i was tried make hard reset didn't make any change
my device cingular wizerd 8125
now my rom is
ipl 1.01
spl2.25
gsm 02.25.11
os 2.26.10.2

Dude, just do step by step like showed here: http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Was work for me as well.

i have already didn't descover the USB
any way thank you i have made hard format and now is working well

Is my K-Jam totally bricked?

Is my K-Jam totally bricked?
It is now stuck up in bootloader screen.
I am able to swtch it off with power button. I can also have first flash screen.
On connecting with USB port, it shows yellow light indicating that it is charging & that over a period of time, goes green.
Earlier I had flashed TNT ROM but while reflashing newer it got stuck up as after flashing, I tried to hard reset [mistakenly thought ROM is flushed fully] & could not go further after initail first screen.
Other details:
IPL:2.16
SPL:2.16
GSM:02.07.10
O.S.:11.0.0.2
May some one help?
Thanks in advance.
Virat

Nopes ! its not 'Bricked' just had a bad flash. As long as it gets into bootloaders ,its perfectly safe. Perhaps,your phone is not CID unlocked ?
Download the official carrier's rom from its website and flash it in the bootloaders,it'll start to work fine.Then read the guide to cid unlock and upgrade.
Cheers!

boot issues
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.

ghumanfly said:
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
Click to expand...
Click to collapse
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!

Thanks but solution found while reflashing in XP
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat

virat said:
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
Click to expand...
Click to collapse
Thanks !
Glade you got it working
Have a nice day !

zabardast_1 said:
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Click to expand...
Click to collapse
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.

ghumanfly said:
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
Click to expand...
Click to collapse
'Hard Reset' the phone,hope it'll work fine.
Well,I assume,you cudn't do the SoftSPL correctly the first time,try to apply the SpftSPL again correctly,if it works,ok,otherwise you can upgrade to wm6 with HardSPL method.

ba salam khedmate aghaye zebardast
duste aziz man ppc imate kjam daram ke eshtebahan soft spl kardam va rom wm6 prophet rush rikhtam ba tavajoh be inke seri gushi man g4 wizard bashe (ipl&spl 2.16.0001) kholase gushi alan tu safeye avali ke windows ba yek logo az rom marbuteh miad bala gir mikoneh .albateh 2 ta rom kjam asli wm5 ham gir avordam rikhtam vali hamunjuriye albateh jaye shokresh baghiye ke gushi tu halat bootloader gharar migireh va hard reset ham mishe. lotfan be man komak konid ta moshkelam ro hal konam. ba tashakor az shoma

could you please ,solve my problem kjam g4 wizard
laike salam brother
thank you very much for direction. I want to answer your question:
Quote:1. Which was the original official rom running on the phone before you tried to upgrade ?
1- I think wm5 belonge to 2005 becose it is written under the battrey.
Quote:2. What was the original wm5 rom and IPL/SPL of the phone before ?
2- I couldent remember but this phone approved by uaelab company [TA-2005/453 approved][E05/14/40225/g]and I flash with different official rom which you mentioned at ftp://ftp.clubimate.com but nothing happend ,maybe I do somthing wrong.
Quote:3.What exactly you mean you copied jumpspl to the root of the phone,did you applied SoftSPL ?
3- yes correct I did softspl with whit coulor screen then connected to pc and did toast that .
also I have problem to connect wst 4.2.2 to my ppc.
I download it and run, but the software couldent detect my fhone I dont know why .I connet it from bootloader 3coulor but nothing happen and so on.
could you please to explain how can I work with wst 4.2.2 also very important how to connect that because it says I have to connection with activesync .
pls direct me pls
mamnun
kourosh

Change OS version on a Qtek 9100

Hello. Can I use the Wizard Service too Qtek 9100l to change only one OS version from version 5.1 to 6.1 without change for SPL or IPL? I have a G4. Somebody help me to change the version in Windows Mobile 6.1 software. I mean this way can not use an upgrade program like "ROMUpdateUtility_Wizard_NoID.exe" because the connection to USB phone is down after the restart in Bootloader. Thanks in advance.

samoilenco said:
Hello. Can I use the Wizard Service too Qtek 9100l to change only one OS version from version 5.1 to 6.1 without change for SPL or IPL? I have a G4. Somebody help me to change the version in Windows Mobile 6.1 software. I mean this way can not use an upgrade program like "ROMUpdateUtility_Wizard_NoID.exe" because the connection to USB phone is down after the restart in Bootloader. Thanks in advance.
Click to expand...
Click to collapse
hi there, look, you have to "unlock the device", then you will be able to flash a new rom.
but first read, and read again be4 doing anything.
(use the search button)
Good luck!

What?
Yes. thanks .. very encouraging .. The idea is that one time I failed and I left the phone without OS had to attend a service to do a new reinstall the software. But give me some details how to proceed? Thanks a lot.