First of all forgive me if this question as been asked a million times but to be honest I'm finding the Dream section a mess.
Now onto my question.... I've rooted my G1 and I'm currently running JF 1.51 with hero skin, now I'm I correct that I will always be rooted as long as I stick to custom roms?
The other thing is when I go into recovery mode I get a message at the top of the screen something like "Unable to find /system/command/recovery.cmd" am I correct that means I'm unable to proform backups? which is no big deal for me.
Finally whats the deal with this new spl, do I really need it to run a hero ported rom? I only ask because in all my years flashing windows phones the spl is something you should flash once and leave alone to avoid errors that can brick your phone.
Yes you will always be rooted. Not really sure on the recovery thing...You might want to try to fix that by flashing another recovery image. Yes you need the new spl to run the hero ROM since its HUGE
alritewhadeva said:
Yes you will always be rooted. Not really sure on the recovery thing...You might want to try to fix that by flashing another recovery image. Yes you need the new spl to run the hero ROM since its HUGE
Click to expand...
Click to collapse
Thanks for the fast reply, as for the recovery thing like I said I would never back anything up and restore it anyway (I've always started afresh with every new rom)
Now going back to the spl thing.... Ive already updated my radio to the latest so when I do finally go for a hero rom and do flash my spl is the new spl a custom one which will allow me to reflash back down to a non-hero rom? or do I have to go back to the orginal hardspl first?
The new SPL was released by haykuro and it allows you to have about 30 more mb of space on your system partition. It still allows you to flash non-hero ROMs as well as hero ROMs. Sorry for the slow response >.>
Thanks alritewhadeva everything is clearer now.
Hi there, ive just rooted my phone on rc29 with radio 1.22.12.29.
now i wish to install the jf1.51adp rom but i was wondering if i should update the radio before or after flashing the rom.
Ive searched around and googled, but some said Rom first while some said Radio first. Im confused
pls help
You can just flash the ROM. You don't need the radio for jfadp1.5
I also had this same question, and would like to ask if the answer is the same in every situation?
I.e. one does not need to think about the order of flashing radio or ROM first. Am I correct?
(I was wondering this while trying to instal this Android Revolution HD ROM)
Usually you should flash radio&spl before the rom,but it depends on the roms you wanna flash.
If the roms need new radio&spl,flash them first.If not,just flash the roms.
It's just my opinion.
edward0119 said:
Usually you should flash radio&spl before the rom,but it depends on the roms you wanna flash.
If the roms need new radio&spl,flash them first.If not,just flash the roms.
It's just my opinion.
Click to expand...
Click to collapse
Thanks for your answer. I flashed the radio first and then the ROM, and in my case everything worked fine.
glad to help.
I am a rookie too
Hey all!
i have some questions to this app:
http://www.cyrket.com/package/org.zenthought.flashrec
http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
1. does it works on T-Mobile D G1 with any FW? or also only with RC29 or RC7?
2. is flashing "HardSPL" or "DangerSPL" a musthave or can i use the original SPL (iam scarry to flah SPL)?
3. when i restore the backup do i have the full original t-mobile D delivery version of my G1?
4. how i restore the original recovery.img
5. if needed, how do i restore the original SPL
6. do i need to flash the Radio manual or do the apk make this
7. is this the right order?
- download apk
- install apk
- download CyanogenMod v4.0.1
- save as update.zip on SD root
- execute apk
- create backup
- flash Cyanogen recovery 1.4
- reboot into the new
- flash CyanogenMod v4.0.1
- Wipe
- boot G1
- download new Radio
- copy Radio as Radio.zip to SD root
- update Radio via Cyanogen recovery 1.4
- done
- boot G1 (now i have a rooted G1 with CyanogenMod v4.0.1)
please correct me if the is anything wrong or if i missed any step!!
iam "noob" with android - but i hope not for a long time
As a N00b you should at least read the Sticky posts, like http://forum.xda-developers.com/showthread.php?t=528334 this one...
It's called:
"Don't Start A New Thread - Dream Questions & Answers Here!"
All questions should be posted in the Q&A Section. I'm not too familiar with the 1-click rooting since it's been out for less than 72hrs so from what I've heard the 1-click root flashes cyan's recovery for you so all you have to do is this:
-Download and flash newest radio
-Download and flash Hard SPL
-Wipe
-Download and flash CM v4.0.1
If you do it in this order I'm 99.99999% sure you won't brick your phone, but once again please post all future question in the Q&A section
dubbeld00 said:
As a N00b you should at least read the Sticky posts, like http://forum.xda-developers.com/showthread.php?t=528334 this one...
It's called:
"Don't Start A New Thread - Dream Questions & Answers Here!"
Click to expand...
Click to collapse
if to correct me, iam not a totaly noob - iam only noob in flashing android i allready flashed two HTC Wizard to a german Windows 6.5 Beta 2 and they works perfectly only a bit slower as with mobile 5.0
bluedragon1982 said:
Hey all!
i have some questions to this app:
http://www.cyrket.com/package/org.zenthought.flashrec
http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
1. does it works on T-Mobile D G1 with any FW? or also only with RC29 or RC7?
2. is flashing "HardSPL" or "DangerSPL" a musthave or can i use the original SPL (iam scarry to flah SPL)?
3. when i restore the backup do i have the full original t-mobile D delivery version of my G1?
4. how i restore the original recovery.img
5. if needed, how do i restore the original SPL
6. do i need to flash the Radio manual or do the apk make this
7. is this the right order?
- download apk
- install apk
- download CyanogenMod v4.0.1
- save as update.zip on SD root
- execute apk
- create backup
- flash Cyanogen recovery 1.4
- reboot into the new
- flash CyanogenMod v4.0.1
- Wipe
- boot G1
- download new Radio
- copy Radio as Radio.zip to SD root
- update Radio via Cyanogen recovery 1.4
- done
- boot G1 (now i have a rooted G1 with CyanogenMod v4.0.1)
please correct me if the is anything wrong or if i missed any step!!
iam "noob" with android - but i hope not for a long time
Click to expand...
Click to collapse
Yes, this app worked perfectly for me ( cuz I dun wanna waste my time doing all the porcess of pulling the firmware back to RC29 ). If u have the latest radio, then just execute the .apk, turn off your phone right after doing all the required process from that app ( back up current img then Flash the 1.4 img from Cyanogen I remember ), then go into recovery mode and you have the newest recovery img. (Remember to put the CyanogenModv4.0.1 to your SD first). Then Wipe and Flash the update, and you're done
and it works without flashing SPL????
bluedragon1982 said:
and it works without flashing SPL????
Click to expand...
Click to collapse
ARE you NOT getting IT ..........
YOU need TO ask YOUR questions IN the Q&A section....
THIS is THE development SECTION
dan0zone said:
ARE you NOT getting IT ..........
YOU need TO ask YOUR questions IN the Q&A section....
THIS is THE development SECTION
Click to expand...
Click to collapse
thx for moving
now the next ry to get good anwsers and not so stupid answers like the one form dan0zone
hard spl will not brick your phone. it is needed to flash roms from other regions than yours. hard spl is a good thing to have. also with it you can flash nandroid back ups and you can change your splash screen to further personalize your dream. enough said... go download it. flash it. if you have to wipe, then wipe. if you don't like wiping then you should not have rooted in the first place.
but to use this tool have id need to flash the SPL or works it with the original SPL too? in the manual and one the youtube video- there is no info about a need to flash the SPL.
all i want to know is:
can i just install this app, flash the new radio, run the backup, flash recovery, flash CFW, and iam done or not
yes you can do that. afterwards i would recommend flashing the hard spl.
you do not have to flash it, but it would be a good thing.
david1171 said:
yes you can do that. afterwards i would recommend flashing the hard spl.
you do not have to flash it, but it would be a good thing.
Click to expand...
Click to collapse
thanks, should i flash the radio befor i try to root my G1 with the 1-click rooting? or after i flashed the custom FW?
I used the "1-click root"
I followed all the steps and my phone is working fine, but how can you tell if its rooted?
Also, if it is rooted and I wanted to install the most current cyanogen ROM, do I have to install the new radio and SPL files?
Thanks in adv for putting up with my N00Bness.
what build do you have now? rc33? i would first update the radio. i would not mess with the newer spl as it has been known to brick phones. also did you install cynogen's recovery image? turn phone off then hold power button and home key when you turn it on to put you back into recovery image. it should say cynogen recovery 1.4 on top. it will have a number of options on the bottom nandroid backup, restore nandroid etc. if that cynogen"s recovery image is on the phone its rooted. after you flash the latest radio, i would flash jf 1.51 build then cynogens latest build. i heard the going to cynogens latest build will cause a bootloop if your not coming from another modded build.
kaws666 said:
I followed all the steps and my phone is working fine, but how can you tell if its rooted?
Also, if it is rooted and I wanted to install the most current cyanogen ROM, do I have to install the new radio and SPL files?
Thanks in adv for putting up with my N00Bness.
Click to expand...
Click to collapse
To tell if the phone is rooted, download terminal emulator from the market and type su at the prompt. If the phone is rooted, the prompt should go from a $ to a #. If not, you will get a permission denied error message. If that is the case, probably go the old fashion way of rooting
http://forum.xda-developers.com/showthread.php?t=548924
As far as the SPL and radio, you don't need the danger SPL (haykuro's) but you will need to engineering SPL or hard SPL to install custom ROMs. As far as the radio, you want to latest radio to improve calls, bluetooth, etc.
hi im also new..
i did the 1 click root too. i did the back up, then flashed the 1.4. then the nandroid backup, then wiped the data, then flashed cyanogens 4.0.1. so im pretty sure im rooted.. and everything works too! except myfaves and the native im app.
but whats this about the radio? do i have to update that? i havent messed with the radio at all.. what are the dangers in this? if any?
and i haave no clue what the hell spl is lol
roadrunnerx7 said:
hi im also new..
i did the 1 click root too. i did the back up, then flashed the 1.4. then the nandroid backup, then wiped the data, then flashed cyanogens 4.0.1. so im pretty sure im rooted.. and everything works too! except myfaves and the native im app.
but whats this about the radio? do i have to update that? i havent messed with the radio at all.. what are the dangers in this? if any?
and i haave no clue what the hell spl is lol
Click to expand...
Click to collapse
SPL info:
http://forum.xda-developers.com/showthread.php?t=455860
Radio info:
image file for controlling wireless/radio signal, runs at layer underneath android
Source: http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_overview_and_useful_information
Please guys, try to use the search function...pretty please.
definetly flash the radio, it made my speaker a lot louder!
My current build never changed. Its still CRC1 :/
I just tried the terminal emulator command and typed su and it said permission denied :/
What SPL and radio should I flash after I root of course?
DirectMatrix said:
SPL info:
http://forum.xda-developers.com/showthread.php?t=455860
Radio info:
image file for controlling wireless/radio signal, runs at layer underneath android
Source: http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_overview_and_useful_information
Please guys, try to use the search function...pretty please.
Click to expand...
Click to collapse
thank you!
Ok, so this is a newb question so bare with me, i just rooted my phone and installed CM 6 only an hour ago (hurray). But I dont know what a radio flash is or how to handle them? Can anyone help me out, please dont yell at me for not searching, imagine how many thread with the word "radio" would pop up.
-Cheers and thanks
its what gives you the signal on your phone, usually improves signal or gives a feature of some sort.. some rom NEED the new radio update if there is one
simple as i can tell you without gettin all techy nechy
ilostchild said:
its what gives you the signal on your phone, usually improves signal or gives a feature of some sort.. some rom NEED the new radio update if there is one
simple as i can tell you without gettin all techy nechy
Click to expand...
Click to collapse
how do you install one? do you just do an update.zip recovery install?
Blueman101 said:
how do you install one? do you just do an update.zip recovery install?
Click to expand...
Click to collapse
forgot to mention that part, if there is a new Radio out for your phone usually a Dev, will pull it out of a OTA update , and make a update.zip already, and all you have to do is into recovery and flash it over... and some stock roms will push out a radio-ota(rare i belieive) but thats it.. so for froyo radio Cyanogen has a updatezip for froyo radio, you can grab it place it in sdcard then boot into recovery and flash! wa-la got new radio, i also believe you can flash via Fastboot too
Thanks man, i currently have CM6 installed and some other Roms in the Dev section, that i was looking at testing, say you gotta install a radio, so thanks for the help.
I have been trying to flash the CM7 Rom to my G1 and continue to get the same error messages... I tried uploading a pic but the app wouldn't let me, so I will try and get the pic posted asap
Sent from my LG-P999 using XDA App
what is your radio/spl?
also have you flashed many other roms before?
Please using following combination for Radio and SPL. Also note, flash radio first and then SPL otherwise G1 will not boot. Also make sure you have Clockworkmod recovery for CM7. This recovery helps for smooth flashing for CM7.
update_2.22.28.25_S - Radio
hboot0013d-signed - SPL
kudlinux said:
Please using following combination for Radio and SPL. Also note, flash radio first and then SPL otherwise G1 will not boot. Also make sure you have Clockworkmod recovery for CM7. This recovery helps for smooth flashing for CM7.
update_2.22.28.25_S - Radio
hboot0013d-signed - SPL
Click to expand...
Click to collapse
OK, this might be sorta a strange question, but this looks to be the best place to ask it.
Will the Dream be bootable if you flash only the Radio and SPL, leaving untouched the stock Android 1.6?
While I am a Linux geek, I am new to android and prefer to take things one step at a time. That explains why I have a Rooted dream with Amon RA with the stock 1.6 backed up with nandroid.
TheLexx said:
OK, this might be sorta a strange question, but this looks to be the best place to ask it.
Will the Dream be bootable if you flash only the Radio and SPL, leaving untouched the stock Android 1.6?
While I am a Linux geek, I am new to android and prefer to take things one step at a time. That explains why I have a Rooted dream with Amon RA with the stock 1.6 backed up with nandroid.
Click to expand...
Click to collapse
never tried, theoretically it should be as if you did a factory reset and you would just use your recovery to replace anything lost. but if you want to be safe maybe someone who has will chime in.
besides the point go ahead and flash a new rom, even if you stick with 1.6 firmware the developers have come out with much superior roms over the stock android. if you want only 1.6 try super d or super csdi
ok so i decided to test this out, updating a g1 to the 2708+ radio/spl and not flashing a new rom -------- stuck on g1 boot screen, hit call+menu+power then hit home to reboot to recovery, reflashed rom and gapps, rebooted, now everything is good as can be, so to answer your question --- yes it appears you need to flash a rom after you update your radio/spl