Related
Hi all
I've created an application with which you can send SMS using the VOIP Provider VOIPBuster.com!
They offer free SMS sending for lots of countries!
It's the first beta.
You can download it here:
www.ruttensoft.com/files/WMSMSClientVOIPBuster.zip
It has no CAB yet, so just copy the exe-file to your device and start it.
Then go to Settings and enter:
Username (VOIPBuster Username)
Password (VOIPBuster password)
Phone Numbe (Registered with VOIPBuster)
Your contries Dial Code (e.g. +41 for switzerland)
The application will load all your contacts from your mobile database!
After setting the settings, chose a contact and write a message (maximum of 159 letters) and click on send (make sure you have internet coverage)
NOTE: For an unknown reason, Sometimes VOIPBuster gives back an error message, even though the message was sent!
Currently it is made for Smartphone Devices and I've implemented Portrait and Square support (e.g. s730)
Post your comments here!
Thanks
Sven
www.mobilehelp.ch
www.ruttensoft.com
www.mobiledevices.ch
wohoooooo thanks so much for realizing my request. i will try it soon
EDIT:
i was trying to send an SMS while my phone was connected to my computer using the USB cable. it didnt work!!! but now i disconnected the cable and sent the SMS via GPRS/3G. the sms arrived!!!! and it works
HOWEVER;
after SENDING the SMS i also get the error message that the message was not sent or something.
hope you can fix that problem soon, as it is important to know whether the SMS arrives or not..
thanks a lot for your effort!!!!!!!!!!!!!!
Actually if there is only a simple error, it has always been sent on my device. If there is really a problem, you will get an exact error message (no balance, number false....)
I dont know why this is, I get that "Error" back from the VOIP Server so I cant fix it I'm afraid.
But yeah... I have never gotten this error and it was not sent... so you can test it a bit and if has always been sent while this simple error appears, I will deactivate it...
For USB: It's working here... Does your internet connection work while beeing connect on usb?
yes internet available while on USB. but it doesnt matter really.. at least it works though 3G etc.
you might want to disable the error message... its very annoying and loads for ages before it comes.
the GSM VOIPBUSTER Client shows THE SAME error... thats remarkable. implies the error is from the voipbuster server.
Ok I will disable it
awesome, thanks!
hey wat kind of connection does it use to send the sms, dont have a data plan so will simple wifi connection due? dont want to get a bill of charges afterwards . thanks again we all needed something like this. should port this to the smartphone general forum as it'll help everyone . good job
i'm getting an unexpected error when i enter settings, happening to anyone else?
makaveli86, do you have the Wings?
When do you get the error, by clicking on "save"?
It takes the same connection as the Internet Explorer would do.
So if connected to WLAN it should take WLAN...
If the device you've sent the SMS to is not "on", so could not directly get the SMS (but will later if it is turned on), the VOIPBuster server is also giving back the "Error"
SO I will just deactivate that... If there is really an error, it will show the correct error
oh you created it specifically for the wings? thought it was a smartphone app in general, i have the vox was hoping it would work on any smartphone...is there anyway you could find a way to do that because i know a lot of people who were looking forward to this.
Of course... it should also run on all other devices.
But I had no time yet to test it on other devices, mainly on pocketpc I will have to test some more
ohh ok..well i'm having troubles getting into the settings menu (currently running it on a s710 htc vox) so maybe if someone else that has the vox as well can confirm this for me? or if you dumdium get the chance to run some tests and see wahts up? i'll be glad to help if you need it
anything???
i had some problems too at first
then restarted and then it was ok
it kept saying the login details were wrong or something. now it works
restartd
A.Bagatov said:
i had some problems too at first
then restarted and then it was ok
it kept saying the login details were wrong or something. now it works
restartd
Click to expand...
Click to collapse
ya just retried it, still same thign. did a few reboots nothing.
bagatov, you using the s730? how responsive do you find that phone? are you satisfied of its performance?
hey
i use s730 and i love it. but the ram could be bigger. sometimes when i read RSS news with spb insight, listen to music with TCPMP and surf the web with OPERA stuff gets closed due to lack of ram. thats very stupid. but im sure an update will fix it. it also could be faster, but i hope htc will release the drivers to unleash the full potential of the 400 mhz
Dumdidum said:
Hi all
I've created an application with which you can send SMS using the VOIP Provider VOIPBuster.com!
They offer free SMS sending for lots of countries!
It's the first beta.
You can download it here:
www.ruttensoft.com/files/WMSMSClientVOIPBuster.zip
It has no CAB yet, so just copy the exe-file to your device and start it.
Then go to Settings and enter:
Username (VOIPBuster Username)
Password (VOIPBuster password)
Phone Numbe (Registered with VOIPBuster)
Your contries Dial Code (e.g. +41 for switzerland)
The application will load all your contacts from your mobile database!
After setting the settings, chose a contact and write a message (maximum of 159 letters) and click on send (make sure you have internet coverage)
NOTE: For an unknown reason, Sometimes VOIPBuster gives back an error message, even though the message was sent!
Currently it is made for Smartphone Devices and I've implemented Portrait and Square support (e.g. s730)
Post your comments here!
Thanks
Sven
www.mobilehelp.ch
www.ruttensoft.com
www.mobiledevices.ch
Click to expand...
Click to collapse
did you post the new version of this app where the error message is removed?
thanks
i'm guessing hte program is done with?
Hello,
I have a TyTN II WM6.1 Mobile Phone. It's a nice phone, but I have one problem with it. The handling of class-0 SMS (= Flash SMS) is not Ok for me.
I my village I'm member of the voluntary fire brigade. If there is a fire alarm or something else we get a Flash SMS.
Now there are 3 problems with several importance.
1) Flash SMS is not been saved: Is there a way that Flash SMS is showed on the Screen and also saved for detailed reading (for example some time later)...
2) The keys are normally locked, but if I get a Flash SMS, it is possible to touch the "Close" Hotkey and the message disappear. That is problematic if I would like to put the mobile phone out of the trouser pocket and touch it unintentionally.
3) Also it would great if I would be able to set for that special Flash SMS a different sound.
I have found that Windows Mobile has generally a problem with that. In our company (http://www.fob-ps.at) we have several mobile phones (not only HTC TyTN II). Some colleagues are also member of their local fire brigade. So the have the same problem....
Hopefully someone is able to help me (us).
No one is able to help?
Bump?
I'm also struggling with this problem
Someone suggested to make a screenshot of sms, but this is kind of silly and not-so-useful...
I have exactly the same problem. Anyone haven`t fixed it yet ?? I`m trying with MassegeInterceptor but it doesn`t intercept class 0 sms.
No, I didn't find a solution until now.
There is only a workaround => disable Flush SMS / class-0 SMS by the sender (of course, if possible).
Same here, I'd be glad to see a solution (even if I'm a Diamond user, but this should be an issue of WM)
Yes, it's a issue of WM (specially on Touch-Screen enabled devices)...
On all WM I found that situation and there are a lot of different devices I was able to test. There were also some newer devices...
This thread looks dead but no harm posting...
Could you guys try changing this setting in registry:
Code:
HKLM\Software\Microsoft\Inbox\Svc\SMS
TreatImmediateModeCBAsClass0SMS to 0
This might help
Hello mohitsapru,
Thank you for your answer!
Sorry, but that isn't really a help.
by changing the following registry entry:
mohitsapru said:
Code:
HKLM\Software\Microsoft\Inbox\Svc\SMS
TreatImmediateModeCBAsClass0SMS to 0
Click to expand...
Click to collapse
all Broadcast SMS would be disabled.
They wouldn't be recognized by the mobile device SMS Manager. Therefore also no saving is possible....
For further information I found also an article on Microsoft Social
Andyt8 said:
Hello mohitsapru,
Thank you for your answer!
Sorry, but that isn't really a help.
by changing the following registry entry:
all Broadcast SMS would be disabled.
They wouldn't be recognized by the mobile device SMS Manager. Therefore also no saving is possible....
For further information I found also an article on Microsoft Social
Click to expand...
Click to collapse
Hmm but did you try it?
On my device it didn't help. As already written I get no Flash SMS after giving the value to "0". Maybe there is a problem with other addons?
However at the moment I changed to Windows Mobile 6.5.x (on TyTN II) and there it is possible to save Flash SMS out of the box. The value of the registry setting is there "1" - the same as on all other Windows Mobile 6.x devices...
Look, before you say anything, I've searched the forums, and I haven't found anything. This has been bugging me for too long, and it's getting really annoying, since I need a phone that can, you know, take calls.
Whenever anyone calls me, the phone rings three times on their side before I even get the call on my side. At that point, I have about 3 seconds to get the phone before the call goes to voicemail & I get a missed call notification. I've been looking on forums, and everything I see tells me to type in an MMI code on the Dialer, but every time I do, I get the "call forwarding connection problem or invalid mmi code" error message, which is just as annoying.
I have a suspicion that this has to do with YouMail, but I'm not sure. I can't even change my voicemail number with YouMail's instructions, because the MMI codes I type in always result in that same error message. I can change the Voicemail number from the main screen, but I can't change the forwarding numbers (When busy, when unavailable, etc) even in the G1's menus.
I'm running CyanogenMod firmware 4.1.9.2, but it's been bugging me like this since CyanogenMod firmware 4.0.4 was on my phone. Does anyone have any solutions? And please, don't tell me to search the forums. I absolutely hate that. I've searched the forums, and I can't find anything. Literally, nothing shows up. If you know there's a thread that's solved this, don't tell me to find it, just link it here.
First step would be to eliminate apps and skins. If you can I would do a backup of what you need and wipe and flash a firmware.
There have been several complaints about this issue. There are a few threads about this and possible solutions. They are in the rom dev section. One way that might help is to move ring tones back to /system/media/audio. When they are on the sd, they seem to delay. Another thing is to set it to ring and vib. Vibrate always starts on first ring. Atleast, it will vibrate and then ring and vibrate. Better that a total delay. But moving ringtones to system helps alot. That should help a bit... good luck
Er, how dp I do that? It doesn't work in ASTRO, and both adb push and cp from the terminal give a read only error.
The easiest thing to do would be to get root explorer and move them that way (since you can mount /system with it) or go to recovery console and type
Code:
mount system
mount sdcard
cp [dir in sdcard] [dir in system]
reboot
Sorry for the crappiness of the code but i am using my phone to post.
electrolemon said:
Look, before you say anything, I've searched the forums, and I haven't found anything. This has been bugging me for too long, and it's getting really annoying, since I need a phone that can, you know, take calls.
Whenever anyone calls me, the phone rings three times on their side before I even get the call on my side. At that point, I have about 3 seconds to get the phone before the call goes to voicemail & I get a missed call notification. I've been looking on forums, and everything I see tells me to type in an MMI code on the Dialer, but every time I do, I get the "call forwarding connection problem or invalid mmi code" error message, which is just as annoying.
I have a suspicion that this has to do with YouMail, but I'm not sure. I can't even change my voicemail number with YouMail's instructions, because the MMI codes I type in always result in that same error message. I can change the Voicemail number from the main screen, but I can't change the forwarding numbers (When busy, when unavailable, etc) even in the G1's menus.
I'm running CyanogenMod firmware 4.1.9.2, but it's been bugging me like this since CyanogenMod firmware 4.0.4 was on my phone. Does anyone have any solutions? And please, don't tell me to search the forums. I absolutely hate that. I've searched the forums, and I can't find anything. Literally, nothing shows up. If you know there's a thread that's solved this, don't tell me to find it, just link it here.
Click to expand...
Click to collapse
You searched??? Really???
http://forum.xda-developers.com/showthread.php?t=558419
http://forum.xda-developers.com/showthread.php?t=548502
http://forum.xda-developers.com/showthread.php?t=539752
v8.2 @ 0828:
ringer performance improved with method from [email protected]
Changes in v4.0.2
* Possible fix for the "slow ring display" issue (from itp)
* More Donut guts (mainly graphics/display code)
* Turned off debug in the Mms app (rgv)
* Fix for a few security issues
* Modified cgroups a bit, should improve responsiveness
* Vibrate-every-45 is off by default now
* Added the dropbear SSH server into xbin
* Dalvik update
* Other things
Click to expand...
Click to collapse
I swear. It's stupid posts like this that makes me what to stay away from the Q&A section and stop answering questions all together.
Very crappy david, crappy crappy crappy
By the way no offense
Yeah, I know that irrates you
also search for miketaylor00 on the forums. in his sig is a link to a script he wrote which will give priority to the phone components to speed up ring times. His script is included in the JAC builds
edit: i should leave my browser open all day.... binary answered first
Hi all,
I tried to research my problem but I can not find any help.
Here is what I found by my experiment for this weekend.
Problem: On Froyo ROMs, I can receive SMS but CAN NOT send sms. MMS and 3g Internet is working fine as well as voice call.
Question: How do I set SMSC on Froyo, or is there way to fix this?
My findings after experiments:
1. Everytime I flash, regardless the types of a Rom wheather they are modified or origianl or Froyo or Eclair I can not send sms but able to receive. All the other functions of 3G internet and mms seems to be fine after APN setting.
2. On Eclair and Froyo I have tried type *#*#4636#*#* and went to phone info section, typed the SMSC number (that is 0430004010, I'm in Australia using Three hutchison ) pressed update and refreshed but everytime if i going back to testing page, the Input section is empty -> some reason the SMSC number does not get saved. I tried put +61430004010, then it will tell me "error update" whereas the 0430004010 will not show me any message
3. On Eclair, Message -> setting -> Text Message (SMS) Setting has " Message Server" section. I typed +61430004010 and then all of the Roms able to send SMS. This was the fix for my problem on Eclair.
HOWEVER, on Froyo, some reason this section is not available. As there are only two section available "Delivery reports" and " Manage SIM card messages"
4. I have typed **5005*7672*+61430004010# on phone number pad, code rejected...
I have searched the this forum and other forums too.. No one came up with solution apart from SMSC number. But it seems to me that I can't save the number if I go testing page by typing *#*#4636#*#*. Is there other ways to do this ? or have I done something stupid and missed obvious mistake (as usual ) ???
Any thoughts or comments I would really appreciate
Cheers
I have had the same problem, I tried to put it back to default setting, it works
Or go to drakaz forum, you can find help. Good luck!
Could not send SMS on Froyo
Hi!
I have M110S, just updated to Froyo (SL28), and couldn't send sms. The sms center number is correct (checked via SKT Admin menu), and SOMETIMES I could sent from 1 to 4 messages, but no more. I suppose it's possible right after writing the SMSC number, but not every time. Does anybody have the solution?
Have a root, if needed. It was no problems with Android 2.1 before.
Thanks!
BR, Yan.
I have the same problem. I am on XWJS3. Update error and no possibility to send sms
solution from www google com/support/forum/p/Google+Mobile/thread?tid=078232a74455bbf0&hl=en
(sorry, xda don't let me to post links)
Code:
OK, I managed to fix this. I'll post the answer because this was buried deep and is a pain.
Answer is here:
http://forum.xda-developers.com/archive/index.php/t-926771.html
The relevant text is below. One thing I'd say is that the link is a bit vague on how to do the conversion. You need to put your SMSC number in the page, clear the rest of the info and press convert. You then need to ignore the numbers after 11.
For example, my vodafone +447785016005 goes to 0791447758100650110000910000AA00, which shortens to 079144775810065011. Go to the *#*#4636#*#* menu and put that in SMSC and hit update. Messages now send!!!. Hopefully I can save someone else the grief I've had all day...
"
to update the SMSC in android,
the number first need to be encoded
please use below url to encode the SMSC
http://www.twit88.com/home/utility/sms-pdu-encode-decode
for example, if your SMSC is number is +4531300000,
after encode, it is 0691541303000011
put this in the info page, and it will work.
"
Hey, so I've been having the same problem with my shinny new stock LG G2x that I recieved as an easter present. I realize that its not the same phone as in the thread, and its not rooted, but its still running 2.2.2 Android so I assumed the ideology would be the same, I'm on a foreign exchange in Italy and I've been usin TIM (smsc +393359609600) and I've been having no luck using the converted PDU or just putting in the number using the *#*#4636#*#* or the **5005*7672*[number] methods in my phone settings when I click refresh next to the smsc a PDU number comes up, 002B003300390033003300350039003600300039003600300030, in the text box, so I'm assuming my phone needs a PDU number for the smsc, but what number I still don't know and was hoping you could help.
For me, the much simpler and robust solution using AT commands worked flawlessly.
There is AT+CSCA command which does exactly this: setting SMS service number. Example usage:
Code:
AT+CSCA?
+CMS ERROR: 330
AT+CSCA="+380910440601",145
OK
AT+CSCA?
+CSCA: "+380910440601", 145
OK
This should work on virtually every device, not nesessarily Android one. You just need to connect to its console in modem mode, as usual with all AT commands.
ulidtko said:
For me, the much simpler and robust solution using AT commands worked flawlessly.
There is AT+CSCA command which does exactly this: setting SMS service number. Example usage:
Code:
AT+CSCA?
+CMS ERROR: 330
AT+CSCA="+380910440601",145
OK
AT+CSCA?
+CSCA: "+380910440601", 145
OK
This should work on virtually every device, not nesessarily Android one. You just need to connect to its console in modem mode, as usual with all AT commands.
Click to expand...
Click to collapse
I would like to do this, but how do you "connect to its console in modem mode"? I'm using a Galaxy Nexus.
toonlight said:
I would like to do this, but how do you "connect to its console in modem mode"? I'm using a Galaxy Nexus.
Click to expand...
Click to collapse
if still needed.
translate[dot]google[dot]com/translate?sl=ru&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fforum.androidfan.ru%2Findex.php%3Fshowtopic%3D2957&act=url
this guide was usefull for me. and as always - you're doing it at your own risk
cant post link. sorry =(
Smsc error for android solved
I have Easy solutions 4 this
I) Put ur SIM CARD {say SIM 1} in non android phone and simply fill ur operators SMSC from non android mobile to ur SIM CARD
It avoids that encode decode process
II) Or
i) Put other Sim card {Say SIM 2} (but "SAME" carrier/operator) in ur phone
dial *#*#4636#*#* n click refresh (dont click update or u will end up with that card too i.e. SIM 2 )
ii)After clicking refresh u will c a no just note down that no
iii)Put ur SIM i.e. SIM 1 in android phone
iv)dial *#*#4636#*#* n write that copied no in the box SMSC
v)now click update
U R DONE
D 1st trick Work 4 me ..............!
hit thnx if i helped u
Hi everyone!
There is my issue with message display on my HTC TD2:
In message tab, displaying time for new message is too long (about 3 seconds) after turning to "as read". I often take a quick look at new SMS, so that, the messages which I have read are still display as unread. Later, if there are some new SMS coming, you have no idea exact how many of them are new SMS.
Therefore, I just want to look at the new message in 1 second, then the message should change into "as read".
Is there any way to to that? Pls help!
Thank you very much
buphalo said:
Hi everyone!
There is my issue with message display on my HTC TD2:
In message tab, displaying time for new message is too long (about 3 seconds) after turning to "as read". I often take a quick look at new SMS, so that, the messages which I have read are still display as unread. Later, if there are some new SMS coming, you have no idea exact how many of them are new SMS.
Therefore, I just want to look at the new message in 1 second, then the message should change into "as read".
Is there any way to to that? Pls help!
Thank you very much
Click to expand...
Click to collapse
Some basics are missed:
Wich ROM exactly you are using?
Please post your question along with the ROM information (Stock ROM & Version or Custom ROM - Name & Version etc...) so that others will know what ROM is causing the issue and can help you?
Thanks.
Hi,
I found this from Device Information, is it enough?
ROM version: 2.17.707.1 (68613) WWE
Thank you!
I would like to explain a a bit more about my issue:
This above issue is not a problem of HTC phone. I only want to turn the message to "as read" after viewing for 1 second instead of the default 3 seconds.
So is there anywhere to change the setting?
Thanks