Related
Hey guys, i was flashing a new ROM and after i pressed Jump SPL on the phone , i didnt do HARD SPL but went on and installed a ROM ....well now it starts with the loading screen ...........and just never loads..... any suggestions ? is it trash ?? i hope not. Thank
mfesenko said:
Hey guys, i was flashing a new ROM and after i pressed Jump SPL on the phone , i didnt do HARD SPL but went on and installed a ROM ....well now it starts with the loading screen ...........and just never loads..... any suggestions ? is it trash ?? i hope not. Thank
Click to expand...
Click to collapse
Try flashing your stock ( original ) rom, found in the wiki . And start over again.
Oh yeah, and this time it might be a good idea to read ALL the instructions FIRST.
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
denco7 said:
Try flashing your stock ( original ) rom, found in the wiki . And start over again.
Oh yeah, and this time it might be a good idea to read ALL the instructions FIRST.
Click to expand...
Click to collapse
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
mfesenko said:
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
Click to expand...
Click to collapse
Try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to PC and see if you can run the RUU in your stock rom.
denco7 said:
Try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to PC and see if you can run the RUU in your stock rom.
Click to expand...
Click to collapse
Nope, it just does a regular soft reset , and back to the same screen
it is easy to flash it back with original rom or unlock it. just read some tutos here on xda
JugglerLKR said:
it is easy to flash it back with original rom or unlock it. just read some tutos here on xda
Click to expand...
Click to collapse
i looked into it and they had solutions if your phone is in the tri colored screen. my phone is not. my phone is in the loading windows screen... but it never loads.
mfesenko said:
i looked into it and they had solutions if your phone is in the tri colored screen. my phone is not. my phone is in the loading windows screen... but it never loads.
Click to expand...
Click to collapse
that's even better - just start it in 3color boot loader and flash!
loading windows screen appears AFTER 3color boot loader...
mfesenko said:
Nope, it just does a regular soft reset , and back to the same screen
Click to expand...
Click to collapse
Keep trying to put it into bootloader. Try a hard reset and follow instructions to get it into bootloader. Sometimes it takes several tries.
JugglerLKR said:
that's even better - just start it in 3color boot loader and flash!
loading windows screen appears AFTER 3color boot loader...
Click to expand...
Click to collapse
Maybe, I didnt Explaine it correctly but , I do NOT get the tri colored screen . This is how it goes after i press the power button to start my phone : So it automaticaly goes into loading screen where on the bottom right hand corner it shows the Radio version , the G version and some other version.......... and that is the only screen i get after staring my phone.
Maybe you didnt read well enough..
Maybe, I didnt Explaine it correctly but , I do NOT get the tri colored screen . This is how it goes after i press the power button to start my phone : So it automaticaly goes into loading screen where on the bottom right hand corner it shows the Radio version , the G version and some other version.......... and that is the only screen i get after staring my phone
Click to expand...
Click to collapse
YOU AREN'T BEING ASKED TO HIT JUST THE POWER BUTTON
try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to pc and see if you can run the ruu in your stock rom.
Click to expand...
Click to collapse
keep trying to put it into bootloader. Try a hard reset and follow instructions to get it into bootloader. Sometimes it takes several tries.
Click to expand...
Click to collapse
THAT MEANS DO IT AGAIN !
Thanx
Thank you denco , for the info , and thanx chumley for beating some sence into me. So i got to the bootloader. Do i need to instal my original rom or can i just reinstall the one i got or maybe another one?
well I have the same problem.
It started with the edfc problem explained here
While trying to fix that problem, I switched my rom to the TPC elite rom series (windows 6.5).
All went fine till three days later, while text-messaging, the screen freezed. I removed the battery, restarted the device and found myself having the same symptoms discussed in this threat.
Putting my phone into bootloader doesn't work, and I think It has to do with the problem I had before; that apart from the directional buttons and the power button, all buttons are defunct.
Anyone any suggestions? (apart from: don't bother us, etc, etc...)
my phone randomly bricked too a while back....as far as I understand is that either you CAN put your phone in to bootloader or your phone is junked....correct me if im wrong ppl
.....make sure you hold the camera and power buttons then reset with stylus....
and make sure you install your stock rom...aka the att tilt rom
if you didn't do it already...
1. flash your original rom (SD card method - Step 5 Flashing Via MicroSD Card ) you need the rom to be at least from the same operator. it should run just fine, just as long as you follow the directions.
2. HardSPL,SIM CID unlock, etc. as described on the same forum i pointed to a little earlier. from this point on you should have a phone just like it was when new.
try to read more carefully (maybe a few times) and search before you start a new thread.
on the wiki and in the stickies in the rom development section you get a lot of "bricked" solutions. you just have to read them all and see what is your case...
NOOB needs big time help
i installed hard spl no probs
installed energy rom
everything went thru and went to restart
but wen it restarted its just stuck on the black TP2 screen wen it restarts
i took batt out and held volume button down and the power on and that just went to the multi color screen
thats all it will do either way
either the black TP2 screen or the multi color screen
and it doesnt go off, just stays on those
help plz
LVjrod said:
NOOB needs big time help
i installed hard spl no probs
installed energy rom
everything went thru and went to restart
but wen it restarted its just stuck on the black TP2 screen wen it restarts
i took batt out and held volume button down and the power on and that just went to the multi color screen
thats all it will do either way
either the black TP2 screen or the multi color screen
and it doesnt go off, just stays on those
help plz
Click to expand...
Click to collapse
If your phone is CDMA (sprint/verizon) make sure you have a CDMA ROM (there arent very many available), if not try flashing the phone again from the rainbow screen (bootloader) you may want to download the ROM again too, some people have had bad downloads.
so i can redo it from rainbow screen
Yes Put your phone in boot loader ( rainbow screen) and reflash. Who is your cell carrier? If it is Verizon or sprint then get a CDMA rom, AT&T and T-Mobile get a GSM rom
its sprint
wen i tried it said that i dont have usb on, its not readin it
LVjrod said:
its sprint
wen i tried it said that i dont have usb on, its not readin it
Click to expand...
Click to collapse
When you put it in boot loader then plug in your USB cord does it go from serial to usb on your phones screen? It may take a min for it to change
it says to follow the instruction on the pc to sync or sumthing like that
and restarts
and again on that TP2 screen and not doin anything
ok step by step.
1. uplug phone from pc
2. Pull out bat and put it back in
3. hold volume down to get to boot loader
4. plug in USB cable ( it should read on the last 1/3 of the screen near the bottom USB
5. Grab a CDMA rom from HERE or HERE
6. FLash the rom you got from step 5
i did that
but it doesnt do anything from the boot loader
just has all the micro stuff and numbers
but nothin in the usb part
i no i am a goof and it seems frustratin to u
but i appriciate or help
LVjrod said:
i did that
but it doesnt do anything from the boot loader
just has all the micro stuff and numbers
but nothin in the usb part
i no i am a goof and it seems frustratin to u
but i appriciate or help
Click to expand...
Click to collapse
Its cool. IF you look at the last white part of the screen on the bottom you should see something that says SERIAL when no cord is plugged in or USB once it is plugged in
If you dont then we can try using the SD card method
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
yes it does say that
its on usb now
goin to try again
Why don't you take out your SD card and put it in your PC and drag and drop the verizon stock rom on the SD card...That would be just the nbh file...name it rhodimg.nbh then put the sd card back in and then put it into bootloader and flash it back that way?
Yea, just what zelendel instructed you to do....
this is the error
plz make sure its properly synced
plz retry after syncing
LVjrod said:
this is the error
plz make sure its properly synced
plz retry after syncing
Click to expand...
Click to collapse
Ok try the SD method I posted a few posts back
ok
will try it
thanks again
error 260
about usb cradle
but on the boot loader screen it says usb
LVjrod said:
error 260
about usb cradle
but on the boot loader screen it says usb
Click to expand...
Click to collapse
Ok maybe I wasnt too clear, when you flash from the sd card you cant have it plugged in
oh
sorry
redoing
ok its in process now
once it is done then wut
LVjrod said:
ok its in process now
once it is done then wut
Click to expand...
Click to collapse
Once it is done then follow the last step and use the stylus to hit the rest button after removing the sd card and it should boot up full. Where did you get the rom?
My phone was acting crazy today so I rebooted the phone and now it is stuck on the htc boot screen . I am running Fresh Toast v2.1 and haven't made any changes for over a month . I try go into recovery by holding the home key but it does nothing , just hangs . I tried to see if fresh kitchen would see the phone but it doesn't . Any help would be greatly appreciated . I have noticed that the phone will restart after hanging for about 5 mins but of course it still hangs .
I cant get into recovery , however, the only screen that comes up is the screen with 3 droids on skateboards and it says
clearstorage
Click to expand...
Click to collapse
Clear....
Click to expand...
Click to collapse
Done.....
Click to expand...
Click to collapse
<Menu> Reset Device
Click to expand...
Click to collapse
I should add that when I hold down the home and power key , it doesnt take me into recovery anymore , it takes me to the screen with 3 droid on skateboards and says clearstorage .
huedawg said:
My phone was acting crazy today so I rebooted the phone and now it is stuck on the htc boot screen . I am running Fresh Toast v2.1 and haven't made any changes for over a month . I try go into recovery by holding the home key but it does nothing , just hangs . I tried to see if fresh kitchen would see the phone but it doesn't . Any help would be greatly appreciated . I have noticed that the phone will restart after hanging for about 5 mins but of course it still hangs .
I cant get into recovery , however, the only screen that comes up is the screen with 3 droids on skateboards and it says
Click to expand...
Click to collapse
im allso having this problem i have tried like everything to restore my phone but still just stays on the htc boot screen.
cbwhat said:
im allso having this problem i have tried like everything to restore my phone but still just stays on the htc boot screen.
Click to expand...
Click to collapse
Can you get into your recovery?
huedawg said:
Can you get into your recovery?
Click to expand...
Click to collapse
i can get to the menu where you wipe and can go to usb toggle and restore to a custom rom yes
cbwhat said:
i can get to the menu where you wipe and can go to usb toggle and restore to a custom rom yes
Click to expand...
Click to collapse
Do you have a nandroid backup ? If so , try restore . I cant even get into my recovery . If dont work maybe try Turn it off and try to hold the power and home key. IF you get stuck again, hard reboot again (battery), load up, THEN turn it off again. This time, turn it on with the (-) volume button held down.
Have you tried taking the battery out for 30 seconds and putting it back in?
Dave2582 said:
Have you tried taking the battery out for 30 seconds and putting it back in?
Click to expand...
Click to collapse
yes i have
huedawg said:
Do you have a nandroid backup ? If so , try restore . I cant even get into my recovery . If dont work maybe try Turn it off and try to hold the power and home key. IF you get stuck again, hard reboot again (battery), load up, THEN turn it off again. This time, turn it on with the (-) volume button held down.
Click to expand...
Click to collapse
i have no problem getting to the recovery screen its just that i have tried different roms and they all dont work, even ones i have had installed on my hero before. it just stays at the htc boot screen. i have tried reformatting my sd card and partioning it and repartioning it. wiping everything. my nandroid backup didnt work either.
cbwhat said:
i have no problem getting to the recovery screen its just that i have tried different roms and they all dont work, even ones i have had installed on my hero before. it just stays at the htc boot screen. i have tried reformatting my sd card and partioning it and repartioning it. wiping everything. my nandroid backup didnt work either.
Click to expand...
Click to collapse
Sounds like its time to ruu
Well, if worst comes to worst, just run the RUU and start over again.
huedawg said:
Sounds like its time to ruu
Click to expand...
Click to collapse
what is ruu?
cbwhat said:
what is ruu?
Click to expand...
Click to collapse
Click on the link above that Dave provided and download that . Put it on your sd card and flash it . This will take you back to stock but you get to start the fun stuff all over again . Last case scenario . It could be worse , I mean , at least you have options . As of now , I have no way of communicating with my phone and no access to recovery . I might be screwed .
huedawg said:
Click on the link above that Dave provided and download that . Put it on your sd card and flash it . This will take you back to stock but you get to start the fun stuff all over again . Last case scenario . It could be worse , I mean , at least you have options . As of now , I have no way of communicating with my phone and no access to recovery . I might be screwed .
Click to expand...
Click to collapse
i went to usb toggle and put the ruu on the root of the sd card then i went to flash zip from sdcard and it says no zip found. what do i do?
It's a Rom Utility Update. Just download the RUU, install it, then run it. Follow the directions within the RUU. You will have to plug your phone to the PC and let the RUU do its thing. When it's completed, your phone should have a factory stocked ROM.
cbwhat said:
i went to usb toggle and put the ruu on the root of the sd card then i went to flash zip from sdcard and it says no zip found. what do i do?
Click to expand...
Click to collapse
Just go into recovery and choose flash . Find the ruu that you added to sd card and flash it .
huedawg said:
Just go into recovery and choose flash . Find the ruu that you added to sd card and flash it .
Click to expand...
Click to collapse
I believe it's an .exe file. I don't think you can flash it through recovery.
Dave2582 said:
Just download the RUU, install it, then run it. Follow the directions within the RUU. You will have to plug your phone to the PC and let the RUU do its thing.
Click to expand...
Click to collapse
well i pluged it in thought the usb during boot and in the recovery usb toggle and when i run the ruu i get a error 170 usb connection error
Try turning the phone off completely, then run the RUU again.
Isn't there another way to boot? I remember something about using the down volume button, the back arrow and booting... that's probably not the actual keys, but I know it was different from home and power. Anybody?
I unplugged my phone when the flashtool told me to.
Now i can't boot my phone, can't even get to the SE logo.
I tried everything i could found.
SEUS, PCC <- neither worked.
As for flashing, same error, turn on unknown sources and debugging.
Help please..
Are you sure that it´s just a battery problem?
Try to charge the phone.
Sorry I would answer if I knew except I just dont know a thing on flashtools cuz I rooted my x8 via superoneclick
sent from my rooted xperia x8 using xda premium
codfreak said:
Are you sure that it´s just a battery problem?
Try to charge the phone.
Click to expand...
Click to collapse
Tried to. Didn't work..
My phone vibrates when i power on, thats it lol..
...well this is something...
I will tell it one more time, did you try to connect it from flash?
While the phone opens hold down back botton... this open the phone in an other way... no bootlogos and other...
also see this:
http://forum.xda-developers.com/showthread.php?t=1011071
DarkThanos said:
...well this is something...
I will tell it one more time, did you try to connect it from flash?
While the phone opens hold down back botton... this open the phone in an other way... no bootlogos and other...
also see this:
http://forum.xda-developers.com/showthread.php?t=1011071
Click to expand...
Click to collapse
Well tried everything.
I think it's in the 'press back button' mode, cause it automatically bypasses the pop up screen in flash tool.
I reinserted the battery several times as well. Same thing, vibrates continuously if i kept pressing the power button. Oh and the green led flashes when it's vibrating.
xcallum said:
Well tried everything.
I think it's in the 'press back button' mode, cause it automatically bypasses the pop up screen in flash tool.
I reinserted the battery several times as well. Same thing, vibrates continuously if i kept pressing the power button. Oh and the green led flashes when it's vibrating.
Click to expand...
Click to collapse
Seems like it's in flash mode for a short time during boot. Try this thread for answers; http://forum.xda-developers.com/showthread.php?t=1011071
SpyderX said:
Seems like it's in flash mode for a short time during boot. Try this thread for answers; http://forum.xda-developers.com/showthread.php?t=1011071
Click to expand...
Click to collapse
Tried everything in the thread..
...i recomend you to retry everithing... that is all we have...
(unplug everithing from batery,sd card and sim card)
only usb cable....
it seams you are in flash mode...
one time i manage to boot xrecovery from my bricked phone after many reboots, if you do it install rom from there.
also try from other pc, from other usb input on pc.
it dont sound like full brick... i think
try every thing even if you are sure it will fail.
But i can't see my SE logo.. I'm guessing that my screen is somehow corrupted?
Oh and i can't boot up at all.
The vibration and green led light comes up continuously if i kept on pressing the power button.
Do not worry... you just need to update your phone with Sony Ericsson's update service. If you had search the general section you could have found how to fix your phone... take a look at here:
http://forum.xda-developers.com/showpost.php?p=11934117&postcount=7
I think the best choice is flashtool.
You just download the original firmware that you want (1.6/1.6 chinese/2.0/2.1/2.1 chinese) and flash it directly.
Flashtool also has the advantage that you can flash the baseband (if you already have iton your PC) right after the firmware.
GreatApo said:
Do not worry... you just need to update your phone with Sony Ericsson's update service. If you had search the general section you could have found how to fix your phone... take a look at here:
http://forum.xda-developers.com/showpost.php?p=11934117&postcount=7
Click to expand...
Click to collapse
His problem is that SEUS wont work, if YOU had read through the posts you would have seen this.
Sent from my X8 using XDA App
I saw from another thread that if the SD card was used for App2SD before, it can fuxk up the phone after falling back to stock rom.
Mind to take out the SD, or reformat it before start up the phone?
i think, you should retry SEUS method again. i bricked my phone last time and SEUS seems did not work for me. i tried for few time until somehow it works.
bunsub said:
I saw from another thread that if the SD card was used for App2SD before, it can fuxk up the phone after falling back to stock rom.
Mind to take out the SD, or reformat it before start up the phone?
Click to expand...
Click to collapse
A SD card with two partitions, can negatively affect when install a custom ROM on the phone?
If so, I think I know what's going on here...
It shouldn't.. Lots of people have 2 partitions and never had problems
Sent from my E15i using XDA App
I have installed windows phone 10 preview and did not work. could not show main page, i had a loading text and some point moving forever. the phone did this loading all night and did not work. So i installed the recovery app on my computer wich detected my phone and start downloading 1,57 gb software to reset my phone. After that is said that the update failed and i have to restart my phone by pressing volume down and power to try again. I did that and the phone is dead. I can't start, restart, reset whatever. Can anything be done anymore ? Thanx a lot folks.
See here http://forum.xda-developers.com/windows-phone-8/development/help-programmer-unbrick-jtag-t3082592
Omamendih said:
See here http://forum.xda-developers.com/windows-phone-8/development/help-programmer-unbrick-jtag-t3082592
Click to expand...
Click to collapse
its not working man