Database Develop

[Q] Can't boot without Charger/Usb

Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance

First i would liik to charge phone for 24 hours and also check with another battery .
jje

JJEgan said:
First i would liik to charge phone for 24 hours and also check with another battery .
jje
Click to expand...
Click to collapse
The battery don't seem to be defected. Once the phone is booted with a cable connected, it goes without problems. It just will not boot without a charging signal.

Bump - Still actual

Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje

JJEgan said:
Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje
Click to expand...
Click to collapse
That happened to me a while back and I couldn't find a fix for it. Ended up doing the above and it resolved it.

Z3icon said:
Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance
Click to expand...
Click to collapse
i agree wiv the suggetions frnds given.galaxy is hard to brick.i did all sort of unusual things an even uptodate lol.don worri m8 jus flash to older stock and hard reset.check the connectivity pins,to b clean even the battri pins.somtimes its best u format ur eternal xd on pc an format.and giving another hard rest makes things better.i had once formated my int sd on pc and the phone had emptied,then i flashed and things worked fine.personally sticking to stock rom is better if u dont wan troubles,cause every custom rom has som drawback an needs a lil knownledge to tweak it up.check kies if ur on it,i recomend download the recovery driver in it.hope u get some help.cheeeerzzzz

Same here...
Hello everyone,
I too have the same issue as stated in the first post.
I even had issue sometimes that when boot up.
The USB notification icon wouldnt turn off even if i wasn't connected.
Some threads suggested that I clean the USB port, which i did and nothing changed, even if it looked a little bit dirty in there (Hard to say since it is really small).
Now the USB port looks just as new but same issue: I cant power on the unit witout having it connected with a power cord.
Also, when offline in download mode, Odin detect the unit and I can flash my device (Which I did yesterday by flashing UGJH2 re-partition and UGJL2 not re-partition) but when boot up, I can't make it to sync up with the computer. No sync possible (Also now I'm not rooted anymore).
The unit is under warranty but since it is unlocked with a tool that needed rooting to lock back, abviously I would need to be rooted again but to do it, I need to be able to sync it with my PC (No cant do here).
I have some engineer at work that offered me to check it out for me, they think it is related with the USB port, but I'm worried about the warranty seal. I found how to disasemble it but does anybody knows where it could be located on the I9000M from bell (Vibrant)? Does it have one?
Anybody have any better suggestion or a second opinion, please?
Its my 3rd Galaxy S from Bell and Samsung is now the last company I would think when buying a new mobile.
EDIT: Did the Block 2 Method and now it doesnt even want to boot at all (Did the JPY_JPY_JPY.tar part), now it shows the loading sign even faster and the battery doesnt even show it self at all.

Hello again people!
Got my friend engineers to open the phone and they didnt find anything that would cause my issue (Also no warranty label...).
Does anybody knows how to root a Galaxy S with Froyo without a PC?
I want to return my phone to Bell Canada under warranty but my phone is unlocked and I want to lock it back before sending it back and I need to be rooted to do so...
Thanks for your help!

I got the same problem here. Could someone tell me more on this. What is this Block 2 ODIN method?

this problem can be caused by water or sweat that got inside the case of your sgs.
the biggest hole in the case is micro-usb port) i think condensation accumulated there and locked some contacts.
try to disassemble the phone and carefully clean and dry it.
this helped me.

Battery Temperature too low!! Charging problem

Hello people,
I have searched a lot on google en XDA to solve my problem, but i can't find it. The temperature of my Samsung Galaxy s GT-i9000 is to low, to be exact -7° degrees.
The problem is that i can't charge my phone now. The phone says: Charging paused. Battery temperature is too high or too low.
Can anyone help me, is would appreciate it a lot!

That's unusual to be honest ^^ , maybe if you put your phone ( or the battery ) in a worm place this problem will be solved , lol i can't even imagine what you've done to make it -7degrees ..
If the temperature of the phone is nrml and you're getting this msg for no reason u can reset it to factory settings , this will probably fix any software problems.
Good luck

i have reset a lot of times my factory settings. Do you have more solutions? (sorry for my English, i speak dutch) Thanks

did u flash any rom?
How old is your phone(battery)
Try a factory wipe,as suggested in the above post,maybe it's an app that caused the prob

I know for sure it's not my battery because had a other battery in it and it said the same. What i was forgotten to say was that my computer recognize my phone as a samsung galaxy, that is really strange. He doesn't want to charge.

Can you manage to get into recovery mode (by clicking vol up+home+power)? If you can, go to "advanced>wipe battery stats", and see if that fixes the problem.

did u flash any rom(kernel) if not,then I think your battery chipset is broken.
If u did flash any rom try format your system in recovery and flash a new rom first from cwm and if this doesn't fix then format again and flash a rom with Odin
Good luck

Yes i can it didn't work. Could a Kernel help me? Or has anyone have a link to rom which could help me?

Stock rom(jvu) get it from sammobile.com or search for darky's rom and flash this through ODIN.if u never tried odin then search and read how to use it

Thanks i'll try to install the darky rom. I tell you if it helps and when it doesn't i tell is also.

Have you flashed custom rom before? If yes try darky or something. If no is your phone still under warranty? If yes don' t flash anything and take it in. If no flash darky or other rom to see if you can resolve issue.
Sent from my GT-P7500 using Tapatalk 2

Thanx ,cos I never heard of this problem before,so it would be nice with a follow up
Hope u will get fixed.
Good luck m8

Sorry m8 it didn't work. I installed the darky rom and the problem is still there. I installed the Rom by CWM recovery. It couldn't work with odin

Could anyone help me with this problem?

Use darky's 10.2 TAR file this is flashable with Odin or any other .tar file.
@RAMAD rooted roms is tar and only flashed in Odin.search ramad

it diden't work. Could it be solved with a secret code or something? I don't think it is a hardware problem because i can connect with my computer.

dubbelr said:
it diden't work. Could it be solved with a secret code or something? I don't think it is a hardware problem because i can connect with my computer.
Click to expand...
Click to collapse
Hi, did you find a solution to the problem? I have the same problem after leaving my phone in a hammock in the rain (probably not the greatest of ideas). The phone works fine, but won't charge the battery. My solution so far was to buy a separate charger to charge the battery (about $10 from Amazon), but if there is a way to stop the battery check that would be much better than having to take out the battery every day to charge it.
Regards,
Svein

svein.berg said:
Hi, did you find a solution to the problem? I have the same problem after leaving my phone in a hammock in the rain (probably not the greatest of ideas). The phone works fine, but won't charge the battery. My solution so far was to buy a separate charger to charge the battery (about $10 from Amazon), but if there is a way to stop the battery check that would be much better than having to take out the battery every day to charge it.
Regards,
Svein
Click to expand...
Click to collapse
I'm having the same issue. It just started yesterday. Even with low use the phone gets hot and it won't let me charge it. I keep getting the battery temperature error. Even when it's powered off. I went into recovery mode as suggested by a previous poster and there is no advanced options that I can see. I'm not rooted and bone stock. Very frustrating. I've also tried another OEM battery to no avail.

HELP! http://forum.xda-developers.com/ima charging paused battery temperature too low
Hello guys, I get that message whenever I charge it or connect it to PC
my phone is galaxy s2 and the ROM is ICS 4.0.4
if anyone can help me. THanks

The problem is in the charge port flex it self. i work for a cell phone repair shop. i fix this issue all the time. its just a trac on the flex that goes bad. easy replacement fix. Here is a link to buy one.
http://www.ebay.com/itm/USB-Charge-...e_Replacement_Parts_Tools&hash=item3a841732e2

Giga Bricked Note.

Today, my Note got extremely bricked, that I could not believe a phone like that could get so easily blown up.
I get this "Firmware update encountered an issue. Please select recovery in Kies and try again." message while it's rebooting every second.
I got this by making a huge mistake, using the re-partition option with the included .pit file, thinking it would factory-wipe the phone before downgrading... well, it didn't. Now, I can't barely access Download Mode or recovery because of, what I assume, low battery. It's charging now and it doesn't look like it. It reboots itself every 5 sec while it's plugged in. Before that, I used the JB leak and began to hate it because of it's damn instability. I wanted the stable, stock, ICS that came with it. I never had any problems like that on Xperia S.
Hell, even Odin can't ****ing save it because of the reboot-problem. I begin to think that, for the first time ever, I have to send this pile of **** back to Samsung and get a new one by saying, Kies ****ed up my phone.
Is there a solution that DOES NOT INVOLVE A DAMN USB JIG for this phone?

If you got the error in kies you could have followed the kies emergency firmware recovery option. Reflashing with a pit file is only for when you have triggered the emmc brick bug is my understanding. Look for the thread with the unbricking guides and hope for best. If not then it looks like service centre...........
Sent from my GT-N7000 using xda app-developers app

LinixAndroid said:
.. I could not believe a phone like that could get so easily blown up.
I got this by making a huge mistake, using the re-partition option with the included .pit file...
Click to expand...
Click to collapse
Did you really read and combine this two sentences? Sometimes people should read the warnings (here about the reasons why NOT to use a pit) and follow them.
But first of all you should recharge the battery outside your device. When you're sure it's "reloaded" try download mode again and install a prerooted Stock Rom (like GB LC1 3-part) and check if you can install and after reboot into a stable device again.
Maybe it isn't so bad forever only for a few hours.

ThaiDai said:
Did you really read and combine this two sentences? Sometimes people should read the warnings (here about the reasons why NOT to use a pit) and follow them.
But first of all you should recharge the battery outside your device. When you're sure it's "reloaded" try download mode again and install a prerooted Stock Rom (like GB LC1 3-part) and check if you can install and after reboot into a stable device again.
Maybe it isn't so bad forever only for a few hours.
Click to expand...
Click to collapse
Wait, I have to charge it outside the phone? What kind of charger only charges the battery outside the phone?

just find someone with the same phone in your neighbourhood and charge in another phone...that's the easiest way..

I have flashed my note multiple times now and it never crossed my mind to use a .Pit file..
By the way, have you thought of leaving the battery out for a few minutes? I got that Firmware issue message before because the power went out while I was flashing my phone from my PC.. Then I just left it out for a few minutes and was able to boot back into dowload mode again

After the emmc brickbug:
The custom pit file may work but trust me after a few moths you going crazy with your phone... it freezes randomly on every rom and wont charge randomly. When you wake up.. phone frozen and battery is on 0% ... i lived 2 weeks with this then i gave it to samsung and they changed the mainboard for free now im happy

[Q] When phone connect to a power source it goes off

I bought the phone only 3 months ago... The version I had wasn't fast enough so I installed a new rom instead... The rom I installed was even slower so I tried putting another and I accidentally wiped all my data and cause my phone to get into brick mode...
I managed to solve the problem and a vibrant rom is now on my phone...
The problem now is that I want to replace that rom and I found out that every time I connect it to the computer with USB cable or plug it to the wall the phone goes off and a sign of empty battery apears with loading dots...
I tried to switch to a new battery and I realized it's not the problem...
I took the phone to a special lab to fix it and they told me they won't fix it cause there is a component inside that handeling with it may cause the phone to totally die...
I don't know who to turn to...
Please help!

wiping data doesnt make ur fone bricked. give us some info about ur problem, ur fone variant, usage of odin or how u flash or any other that could be used for us to answer or help u.
its like u asking me to marry u as if i know ur gender

[Q] Samsung Captivate hard bricked. HELP.

So the other day i was on my captivate and i had just factory reset it to original eclair. so i tried updating it with kies but it kept failing. So i then tried using Odin and accidently checked bootloader and now my phone turned off and wont show any signs of life. PLEASE IM ASKING YOU PLEASE HELP! What do I do?

Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.

4-2ndtwin said:
Can u get into Download mode with button combo or jig ?
If ur phone shows zero signs of life, even when plugged in to a wall charger, then it is probably hard bricked and so u will need jtag service in order to bring ur phone back to life. Check out mobiletechvideos.com, they can fix ur phone.
Click to expand...
Click to collapse
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated

Theboss14 said:
But i dont get it. I was flashing with odin and it magically formatted the bootloader. Is there a way for me to fix it by myself like restoring the bootloader. I got my phone only 2 month ago. I dont have 40 dollars to invest on jtag service. Like how would they fix it. Could I please get instructions? Thanks and most help is appreciated
Click to expand...
Click to collapse
It doesn't format the bootloaders per say, it you flash a stock ROM with Odin that has bootloaders and if it gets interrupted while it's replacing them, your phone will be bricked as it doesn't have a way to boot (hence the name bootloaders).
The JTAG service basically pushes the bootloaders into the phone. It's something we can't do on our own unless we have the right equipment (riftbox).
Like 4-2ndtwin mentioned, try to get some response from your phone, anything that would show life. That means you can recover on your phone. From there, you'd have to be able to get in download mode and flash Odin KK4 without ANY interruption.

My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?

Theboss14 said:
My phone wont turn on and when i put it in charge it wont even show the battery charging. What else can i do to fix my phone?
Click to expand...
Click to collapse
Try the button combo to get in download mode (could even try a jig). If that fails too, you'll have to get jtag service.
Sent from my SGH-I747 using xda app-developers app

:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.

Theboss14 said:
:cyclops:Fine If i Have to send my captivate for a jtag then i guess i will if thats my only options. But I find the one on mobiletechvideos really expensive does anyone know an alternative. Thanks. I apreciate it if you tell me.
Click to expand...
Click to collapse
The only alternative I can suggest you is to find that service around your place, hopefully for cheaper.

Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3

Theboss14 said:
Yo. I think this service is legit. Is it?
On ebay.com
/itm/Samsung-Galaxy-Riff-Box-JTAG-Boot-Restore-Unbrick-Service-/271281826547?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item3f29a82af3
Click to expand...
Click to collapse
Kinda hard to know. look at the seller's rep Imo.

Samsung Captivate is dead, unable to go in download mode....
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325

Jtag. The only possible way out.
Sent from my GT-S5282 using xda premium

vishu_10d said:
Hi,
I also have similar kind of issue which is still not resolved.Long time back postem my problem regarding my samsung captivate phone, I tried all the solution provided my members of this community to fix my issue. But it is still not resolve.
Could you please look in to my thread, and advise me what could be the problem and how can I repair my phone ?
Below is link to my thread where I have mentioned the issue in detail -
http://forum.xda-developers.com/showthread.php?t=2194325
Click to expand...
Click to collapse
From what I've read in your thread, you had the i9000 image working, correct? If so, why not just roll with it?
All Captivate/i9000 rom works with the i9000 bootloader. Captivate GB Rom will need to get the 2.3.5 i9000 Music Player APK, but aside from that, it all works. AOSP roms like Cyanogenmod and Slimbean will work out of the box if you get the captivate version. To install them, you'll need a slight workaround though:
Flash a kernel with CWM.
From there, flash the Captivate Glitch Kernel V13. It only comes in .ZIP format, which is why you need a CWM kernel before hand
Flash CM7 to convert the partition table(IMPORTANT. Rom will not boot if you skip this step.)
Flash anything from here on. If it throw a status 7 about device not being SGH-i896/SGH-i897, etc..., flash the Glitch Kernel before attempting to flash the ROM. You do not need to flash CM7 again.
(I know other ROM should have converted the partition table, but in reality it doesn't. Since you're flashing from Glitch, a CM7/MIUI kernel, they assumes you already have the MTD partition layout, and only resize it instead of doing a full conversion. CM7 check the partition table regardless of which kernel you're flashing it from.)
As a plus, Deep Idle works only with the i9000 bootloader. You'll get sleep of death otherwise. If you want your ATT World Phone image back, you can flash the custom param.lfs and change it manually. This can only be done from Touchwiz ROM though.