Loss of touch screen - Sony Xperia T, TL, TX, V

I've flashed stock rom because I had weird reboots.. after that i've flashed stock rom my touch screen doesn't work anymore, please help me.. :crying:

try to re-flash the rom

I've flashed 3 times jb stock rom it didn't work, then I've flashed ics stock one and now it works Now I'm trying to re flash JB one, hope it works

try to flash latest jb firmware .141,it has less bugs and i'm satisfied with this firmware
good luck

Use search, there is a thread where the answer is given by me in it.
Sent whilst sat on the toilet.

Related

[Q] help... I am new to this

I have just flashed a rom on my galaxy note, it works fine but i can't find the CWM on note which i flashed the rom with...
i use to have a KK1 before flashing and now it' KK5 .. is it normal?
what should i do if i wish to flash an other rom?
Yes, it is pretty much normal.
If you need to use the CWM, you will have to flash the one corresponding to your baseband again in the new installed ROM.
Enjoy!!
thank you very much.

Please help!

hey guys my rogers captivate is stuck in a recovery mode loop(it boots into recovery all the time). Could someone please help me get out of it.
This problem started happening after i tried switching from the team icssgs 14.1 rom to the apex 12.4 rom. I think the problem happened after I changed the bootloader to an att 1897 bootloader after flashing the apex rom.
I have tried reflashing the team icssgs rom and flashing other kernels but nothing has worked so far.
Could someone please help me out. I've searched hard but am totally stumped.
Yep. I don't think u can flash bootloaders while on ics, miui or cyanogenmod.
U need to use Heimdall/Odin and flash back to Stock and then go from there with the Apex install instructions. Check the Stickied Thread in the Development section about Odin/Hemdall Stock One Clicks.
Sent by XDA Premium App
Here's the link to the Rogers stock one-click odin flashes. They've saved my bacon a few times when needing to reflash to stock.
http://forum.xda-developers.com/showthread.php?t=979133

[Q] help me get back to stock...no backup..

OK so I didn't back up when I started flashing roms. Right now I'm using thrillseeker with great results but I need to start all over and back up my stock before I flash again...unless there's a way to download and flash through cwm recovery...or can I just use the LG updater and then pick recovery phone.? Please help
Update totally fixed
OK so I tried a few different methods I found and finally got this thing back to complete stock rom,kernal, and stock recovery....it wasn't that bad....I rerooted and flashed thrillseeker 3.1 then flashed 3.12 update ... a battery.zip and a theme and everything is great.......oh yeah I MADE A BACK UP.
...PM me if anyone needs help...I will do my best..
rtoddb said:
OK so I tried a few different methods I found and finally got this thing back to complete stock rom,kernal, and stock recovery....it wasn't that bad....I rerooted and flashed thrillseeker 3.1 then flashed 3.12 update ... a battery.zip and a theme and everything is great.......oh yeah I MADE A BACK UP.
...PM me if anyone needs help...I will do my best..
Click to expand...
Click to collapse
Hello there. I am running the official ICS port on my Trill flashed with the LG tool. I am having problems, camera is upside down, I have low ram... Phone is rooted but for some reason it is impossible to install CWM recovery. Can you please help me get back to stock?

Any Gingerbread Rom for N7000?

Hi Guys,
I wondered if any of you (more experienced, long serving) users are aware of any Gingerbread ROMs? Preferably a CM or any 2.3.7 based, but if they don't exist, any build will do... It needs to be a safe build, a non eMMC bug version, or DeOxed (is that the term)?
Sure, you're gonna say, why bother.. There's JB and KK now, but I like GB and wanted to see what it's like on the N7000?
All help gratefully welcomed..
Thanks, Lister
all GB kernels are safe to wipe data (only stock ICS kernel is unsafe)
i advise you to try Checkrom HD v6, still my favorite GB rom
Sent from my GT-N7000 using xda premium
Hi @ASMI1,
Thanks for such a fast reply.. I've been to the main website where I can download it.. One thing I'm worried about, I've seen in this ROM and mentioned in another GB based ROM for our phones is: CSC?
the CheckRom v6 features "Multi CSC" what does this mean, and is it dangerous?
Do I flash Philz Kernel, and install with that? Do I need to flash another kernel afterwards? Does this room raise the counter or anything?
I'm OK flashing JB or KK, but not done a GB ROM and worried in case summit not aware of, don't want to brick this...?
Thanks, Lister
ASMI1 said:
all GB kernels are safe to wipe data (only stock ICS kernel is unsafe)
i advise you to try Checkrom HD v6, still my favorite GB rom
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
CSC means customer service code. Multi csc means that this rom is not locked to any country or carrier.
Yes you can flag it under philz kernel.
Sent from my LG-E410
Hi @kaborayyan / @ASMI1 / Guys,
I've flashed Philz original Recovery/Kernel first, and then do all the usual wipes... Factory Reset, System, Davlik Cache (and even tried Pre-Load? after first failed) and same result each time.
During the flashing process it seems to backup the EFS (even though that was the first thing I did when I got this phone, so hope it hasnt over written my original EFS backup) but then gets stuck. It seems to stay on Flashing Modem for ages, and progress bar doesnt move... And then the phone goes black, and it reboots... But then gets stuck on the white Samsung splash screen "Samsung Galaxy Note - GT-N7000" and stays like that, unless I reboot....
I reboot, but notice CWM 5.0.2.7 is installed (not sure if thats a safe one?) so I flash Philz from within that, reboot recovery and then do all the wipes again... and the phone seems like normal again. However I dont know if I've done anything wrong, or if the phone is still safe or if I've killed it any way??? lol
Cheers for any help/support.
Thanks, Lister
Lister Of Smeg said:
Hi @kaborayyan / @ASMI1 / Guys,
I've flashed Philz original Recovery/Kernel first, and then do all the usual wipes... Factory Reset, System, Davlik Cache (and even tried Pre-Load? after first failed) and same result each time.
During the flashing process it seems to backup the EFS (even though that was the first thing I did when I got this phone, so hope it hasnt over written my original EFS backup) but then gets stuck. It seems to stay on Flashing Modem for ages, and progress bar doesnt move... And then the phone goes black, and it reboots... But then gets stuck on the white Samsung splash screen "Samsung Galaxy Note - GT-N7000" and stays like that, unless I reboot....
I reboot, but notice CWM 5.0.2.7 is installed (not sure if thats a safe one?) so I flash Philz from within that, reboot recovery and then do all the wipes again... and the phone seems like normal again. However I dont know if I've done anything wrong, or if the phone is still safe or if I've killed it any way??? lol
Cheers for any help/support.
Thanks, Lister
Click to expand...
Click to collapse
Reboot into recovery again if you found the touch colored recovery then you're on philz kernel. If not be sure that you selected the suitable philz kernel.
If I helped hit the thanks button.
Hi @kaborayyan,
Yep, I'm certainly on Philz Kernel.... when it's loaded, its kind of a pink/purple-ish colour.... (not sure what version, but something like 5.1.1.1) It's the first one I downloaded when I got this phone a couple of months back, that I used to root/and then flash custom roms with... (namely, JB).
However, I fancy seeing what GB is like on it, but get stuck... it seems to hang on Flashing Modem, sits there, and then reboots without finishing by the looks of things...?
Its a UK Vodafone, N7000
Thanks, Lister
Did you try to flash a stock GB ROM through Odin? May be you get better results. Then root it and flash whatever you want of custom GB based Roms.
Sent from my GT-N7000
yeah like kaborayyan said, try to flash any stock GB rom using odin3 v1.85 only (you can find instructions and download links in the sticky thread in the orginal development section, you should look for mirrors because hotfile is down or just download chainfire prerooted stock rom)
After you get a stock rooted GB rom installed on your phone, install checkrom using the recovery after wiping data, cache and dalvik.
as i said stock ICS roms are unsafe, other roms are safe... just keep a backup of your efs
and be careful when using odin3.
btw, hitting the "thanks" button is easier than writing it
cheers
Sent from my GT-N7000 using xda premium
Lister Of Smeg said:
However, I fancy seeing what GB is like on it, but get stuck... it seems to hang on Flashing Modem, sits there, and then reboots without finishing by the looks of things...?
Click to expand...
Click to collapse
Go to www.samsung-updates.com firmware section. There are a few 2.3.6 roms available. Stock though. These roms might be non root able. Not really sure as there are not many methods of rooting GB (check Dr ketans thread for more info) . It could also be possible that for rooting again you will need to flash an ICS or JB rom again using Odin.
If you just want to taste the ginger then stock GB rom is quite fast.
Lister Of Smeg said:
Hi Guys,
I wondered if any of you (more experienced, long serving) users are aware of any Gingerbread ROMs? Preferably a CM or any 2.3.7 based, but if they don't exist, any build will do... It needs to be a safe build, a non eMMC bug version, or DeOxed (is that the term)?
Sure, you're gonna say, why bother.. There's JB and KK now, but I like GB and wanted to see what it's like on the N7000?
All help gratefully welcomed..
Thanks, Lister
Click to expand...
Click to collapse
Pristine LC1 is a good option. Its in the OP of the pristine thread. All GB kernels are safe, as above mentioned.
There is no 2.3.7 or CM based N7000 rom
Sent from Nexus 5 on Slimkat
Hi @ASMI1, @kaborayyan, @nokiamodeln91, @AndroidSlave,
Thanks guys, with you're help.... I've finally made it !!! It appears CheckROM HD v6 does not want to flash under Philz (or some other recovery, cant think what now??) However I did manage to get it to Flash under Abyss Recovery Kernel (which is based on GB kernel, apparently).
So it has flashed now, not had chance to play around with it yet as am at work... But just by looking at it, it's bringing back the GB love....
Yes I know it's sad, why go back to GB?? lol. But sometimes it's just nice to go over, for old times sake... Used to do it on my ZTE Blade many a times...
So, (quick questions).
1) With this stock-ish rom, can I remove/tweak/clean up, and then package it (in CWM) as a flashable rom?? or do I have to backup/restore only in that version of CWM??
2) It safe to flash any version of CM9, without using flashing a seperate recovery afterwards... and still avoid the eMMC. It's only official STOCK firmware that killed them....
Thanks once again guys for all your support, I know its not normal (and frowned upon) to use older firmware... But just wanted to see what GB was like again...
Cheers, Lister
Lister Of Smeg said:
Hi @ASMI1, @kaborayyan, @nokiamodeln91, @AndroidSlave,
Thanks guys, with you're help.... I've finally made it !!! It appears CheckROM HD v6 does not want to flash under Philz (or some other recovery, cant think what now??) However I did manage to get it to Flash under Abyss Recovery Kernel (which is based on GB kernel, apparently).
So it has flashed now, not had chance to play around with it yet as am at work... But just by looking at it, it's bringing back the GB love....
Yes I know it's sad, why go back to GB?? lol. But sometimes it's just nice to go over, for old times sake... Used to do it on my ZTE Blade many a times...
So, (quick questions).
1) With this stock-ish rom, can I remove/tweak/clean up, and then package it (in CWM) as a flashable rom?? or do I have to backup/restore only in that version of CWM??
2) It safe to flash any version of CM9, without using flashing a seperate recovery afterwards... and still avoid the eMMC. It's only official STOCK firmware that killed them....
Thanks once again guys for all your support, I know its not normal (and frowned upon) to use older firmware... But just wanted to see what GB was like again...
Cheers, Lister
Click to expand...
Click to collapse
1) not really unless you use a new version of philz touch recovery, which wouldn't happen because on the n7000 the recovery sits on the kernel, thus you are stuck with an old kernel and old recovery. As such your best bet is to do a nandroid backup. Further - when you restore such a backup, I recommend flashing abyss again first so you are in the Ame recovery it was made in
2) yes. Just be concerned of Stock ICS (4.0.4) with a custom recovery. Never flash temporary cwm.zip. matter of fact, just avoid stock ICS at all costs. Newer versions of cm9 are safe. Avoid very old cm9 versions. My personal recommendation to you would be Paranoid Android cm9 ( I think it stopped at around .4a) that one was amazing.
Sent from Nexus 5 on Slimkat

Stock Based Roms Not Working!!!

So about a week ago I bought this samsung galaxy s3 lte gt-I9305, after 2 days i rooted it and installed Agni custom kernel. No problems yet. Then about 3 days ago I installed cm12.1 and i noticed that the Agni custom kernel wasn't working on it (Sleep of Death, Lag, Stuttering, Freezing.) And now I tried to flash the stock firmware via odin and It lags like hell and keeps freezing and rebooting right after i get to choose my language. The other stock based roms won't work either. Please help. And sorry if bad english.
FinMobile said:
So about a week ago I bought this samsung galaxy s3 lte gt-I9305, after 2 days i rooted it and installed Agni custom kernel. No problems yet. Then about 3 days ago I installed cm12.1 and i noticed that the Agni custom kernel wasn't working on it (Sleep of Death, Lag, Stuttering, Freezing.) And now I tried to flash the stock firmware via odin and It lags like hell and keeps freezing and rebooting right after i get to choose my language. The other stock based roms won't work either. Please help. And sorry if bad english.
Click to expand...
Click to collapse
Do yo wipe data/cache after install stock rom ?
il3gal said:
Do yo wipe data/cache after install stock rom ?
Click to expand...
Click to collapse
I've done everything by the book. And now every rom that i try fails to boot Tried to flash the stock firmware via odin. It boots but When im choosing my language it starts stuttering and freezes.
Please I need help quickly!!!
FinMobile said:
I've done everything by the book. And now every rom that i try fails to boot Tried to flash the stock firmware via odin. It boots but When im choosing my language it starts stuttering and freezes.
Please I need help quickly!!!
Click to expand...
Click to collapse
there are 2 Agni Kernel...one for stock base rom and one for cm base rom.
install in right kernel for the rom that you want
LeoDeos said:
there are 2 Agni Kernel...one for stock base rom and one for cm base rom.
install in right kernel for the rom that you want
Click to expand...
Click to collapse
I always use right kernel for the roms I install. Oddly the stock firmware I tried to install is now working. The only problem is that it now freezes in 5-15 minutes.
FinMobile said:
I always use right kernel for the roms I install. Oddly the stock firmware I tried to install is now working. The only problem is that it now freezes in 5-15 minutes.
Click to expand...
Click to collapse
have you tried stock kernel with stock firmware?
I Fixed It!
I managed to use KIES 3 to upgrade my firmware and now it's working. Thanks for everyone who participated in this thread.

Categories

Resources