[Q] Xperia Z1 Didn't go to fastboot.its bricked - Xperia Z1 Q&A, Help & Troubleshooting

Hello.Please Help Me
Xperia Z1(c6903) after Flash is bricked.its just blinking.when i connecting it to Pc and open Flashtools..Its say:
11/043/2014 18:43:06 - INFO - Device connected with USB debugging off
11/043/2014 18:43:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
Vol+Power ( 3times=vibrating)
And Its didnt go to fastboot and flash mode.i have a setool box and.....
Please Help me
i'm in iran.sorry for bad english

sina.shamsi said:
Hello.Please Help Me
Xperia Z1(c6903) after Flash is bricked.its just blinking.when i connecting it to Pc and open Flashtools..Its say:
11/043/2014 18:43:06 - INFO - Device connected with USB debugging off
11/043/2014 18:43:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
Vol+Power ( 3times=vibrating)
And Its didnt go to fastboot and flash mode.i have a setool box and.....
Please Help me
i'm in iran.sorry for bad english
Click to expand...
Click to collapse
return to SONY. OR replace a new mainbroad. just as i did.

could you please explain what you did exactly step by step?

ArashMiniStar said:
could you please explain what you did exactly step by step?
Click to expand...
Click to collapse
I go to flash it with C6903_14.2.A.0.290_1274-0815_R1B and i flash it...it's not go to complete...and its bricked.and its just blinking...
sorry for bad english

wsdy0001 said:
return to SONY. OR replace a new mainbroad. just as i did.
Click to expand...
Click to collapse
i'm a mobile Fixer.. i dont wanna replace it....its expensive ...any suggestion?? please help me :|
i send it to Sony.But it's not go to be Fix without Replace

Please Help Me....

Related

[Q] Is any chance for my X8?

Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Domec18 said:
Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Click to expand...
Click to collapse
you don't need to turn on unknown sources. pull out the battery, put it in, don't turn on the phone, in flashtool click on flash-> choose the file you want to flash, pc will tell you that you need to hold back button and conect the phone. do it
fifo171 said:
you don't need to turn on unknown sources. pull out the battery, put it in, don't turn on the phone, in flashtool click on flash-> choose the file you want to flash, pc will tell you that you need to hold back button and conect the phone. do it
Click to expand...
Click to collapse
I did it but look....01/027/2012 01:27:56 - INFO - Start Flashing
01/027/2012 01:27:56 - INFO -
01/027/2012 01:27:56 - ERROR - Error flashing. Aborted
01/027/2012 01:27:56 - INFO - Now unplug the device and power it on
01/027/2012 01:27:56 - INFO - Then go to application settings
01/027/2012 01:27:56 - INFO - turn on Unknown Sources and Debugging
01/027/2012 01:27:58 - INFO - Device connected in flash mode
01/028/2012 01:28:24 - INFO - Device connected with USB debugging off
and what i should do now?
Well u stuck right? Use SEUS to restore 2.1, root back, install back xrecovery installer,do full wipe (must do this for once), flash GDX13, reboot, touch ur screen during sony ericsson logo appear, CWM will appear, flash GDX21, complete. GUD LUCK
-If u want, unlocked bootloader and flash alfs kernel v5. don forget to flash update file in cwm
Thanks but I can´t connect phone in SEUS. When it show me how to connect it I do it. But then my device manager shows that i connect Sony Ericsson USB Flash but after while it change for USB Mass Storage Device and there is error that device can´t turn on
Domec18 said:
Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Click to expand...
Click to collapse
Hi man, possibly in THIS THREAD you could find the solution to solve your problem, read carefully and good luck
If I helped you... HIT THE THANKS BUTTON!
Domec18 said:
Hello everyone, is any chance to repair my X8? I tryed instal new rom, GingerDX. Every step was succes unless first boot. It stoped on SE logo. I tried flash it with flashtool, but when i connect phone with PC it asked me for turn on Unknown Sources and Debugging. But how if i can´t turn it on?
Can somebody help me? PLEASE
Click to expand...
Click to collapse
There may be a simple solution,as you said it stops booting after flashing GDX.did you try a full wipe after flashing the rom?did you flashed it with CWM or xRec?
It stops before GDX and I flashed it with xRecovery. Still nothing, i still have only SE logo.....
You must install GingerDX with CWM Recovery. Only v013 and older can be installed with xRecovery
But how if I can´t instal CWM now?
You must reinstall stock firmware with FlashTool, SEUS or PC Companion first
forum.xda-developers.com/showthread.php?p=12442257
I know, I already tried it. Flashtool want Unknown sources and Debugging on, but I can´t turn it on because I can´t turn on phone. SEUS can´t find my phone, in Device manager X8 looks like Sony Ericsson USB Flash but after while it change to USB Mass Storage Device. And there is error because the device can´t be turned on. I tried it also through PCC. I tried repair it. But it can´t download software and I don´t know why.
FlashTool don't need Unknown sources and USB debugging to be turned on. It is only info what you need to do after flashing when phone boots up.
Do you have flash drivers installed?
Try to turn off your antivirus if you have it installed.
Can you try reinstall it on another computer?
I posted log from Flashtool here before.Here it is once again.....
01/005/2012 22:05:57 - ERROR - Please plug you device in flash mode
01/005/2012 22:05:58 - INFO - Searching Xperia....
01/005/2012 22:05:58 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&2FC9BD78&0&1
01/005/2012 22:05:58 - INFO - Start Flashing
01/005/2012 22:05:58 - INFO -
01/005/2012 22:05:58 - ERROR - Error flashing. Aborted
01/005/2012 22:05:58 - INFO - Now unplug the device and power it on
01/005/2012 22:05:58 - INFO - Then go to application settings
01/005/2012 22:05:58 - INFO - turn on Unknown Sources and Debugging
01/006/2012 22:06:01 - INFO - Device connected in flash mode
01/006/2012 22:06:19 - INFO - Device connected with USB debugging off
So I really don´t know what flashtool want from me.
So I tried every manual on xda. And nothing.
Here is my problem with Flashtool
Uploaded with ImageShack.us
im also facing tha same problem...so my request to all...plz help us to solve this problem
Thanks & Regards !
Domec18 said:
Here is my problem with Flashtool
Click to expand...
Click to collapse
Try with FlashTool 0.2.9.1
Still nothing, still the same error with Flashtool
Domec18 said:
Still nothing, still the same error with Flashtool
Click to expand...
Click to collapse
hey mate..look very scared i read all post here... and u did all the way and
only 1 chance left!
if your phone still under warranty u save your money...
sent to them and said u dont know why..
i did for my phone

Flashtool: device not recognized

Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
what exactly did you do? write all the steps
Ok I think it works now, I needed to switch to MSC mode Thanks anyway
well, the phone needs to be turned off
+ drivers installed,lpl
Sent from my E15i using xda premium
+ holding back button while connecting USB
Is it important how did i send this?
Tommolo said:
Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
Click to expand...
Click to collapse
intall latest drivers and hold back button then connect to the computer....................
if still don't recognize, go to device manager and check there,
I think you don't:laugh: turn on debugging
yeah!
you forget to turn on your debugging!
mark :
allow non market apps
android debugging
install all drivers
x8driver
flashtool\driver
gordons gates
Help.
here is my problem i got the flashtool because i want to downgrade my xperia pro and it connects it detects my device but once i put it into the fastboot to flash it back to its original state it just shows the little pop up that says to connect it to fastboot mode and i do it on the phone the little blue light turns on and stuff but it doesn't recognize it on the flashtool the usb debugging is on and the unknown sources is on as well i want to downgrade the phone because since i upgraded it doesn't let me watch movies on my phone from the internet and i want to root it to if anyone can help it will be much appreciated. thanks :crying:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Awesome!
nag xperia said:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Click to expand...
Click to collapse
Doing this now. Makes Sense! Thank you
phnxme7 said:
Doing this now. Makes Sense! Thank you
Click to expand...
Click to collapse
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
ariadelvana said:
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
Click to expand...
Click to collapse
make sure if your flash tool not corrupt, disable firewall or antivirus..
install all driver and check your phone
Milandas01 said:
Hello friend, please pay your attention. I'm try to root my canvas hd using sp flash tool. Everything is alright but when I connect my device it's only shows searching. Not detect i also install or uninstall x86 driver hundred times. But problem is same. what is the problem i can't understand :'(
Please please please help
Thank in advance :'(
Click to expand...
Click to collapse
Wrong forum
pooped from my rooted a$$

Xperia Z (C6603) stuck at bootanimation

Hi, yesterday i tried to install a soundmod manually on my xperia z. But now its stuck in the bootanimation. Any idea how to fix that? Sorry i'm a noob. It's rooted and running stock lollipop with locked bootloader. Thanks for your help
Asdfmoviee said:
Hi, yesterday i tried to install a soundmod manually on my xperia z. But now its stuck in the bootanimation. Any idea how to fix that? Sorry i'm a noob. It's rooted and running stock lollipop with locked bootloader. Thanks for your help
Click to expand...
Click to collapse
Just flash the ftf of ur device via flash tool...
DastanShaikh said:
Just flash the ftf of ur device via flash tool...
Click to expand...
Click to collapse
I tried that too but i get this error in flashtool: Processing of loader.sin finished with errors. Any idea how to fix that?
Asdfmoviee said:
I tried that too but i get this error in flashtool: Processing of loader.sin finished with errors. Any idea how to fix that?
Click to expand...
Click to collapse
Your ftf might be broken... Try another.. One
DastanShaikh said:
Your ftf might be broken... Try another.. One
Click to expand...
Click to collapse
ok i will try but i think there is a problem with the flash driver. I also tried to repair it with sony pc companion and when i try to enter flashmode nothing happens. The green light blinks for fewer then a second. And when windows trys to install the driver it fails. It says failed to install SOMC flash device. Fastboot ist working fine. I will try it tomorrow on another computer. I hope it works.
Sorry for my english its not my first language.
Asdfmoviee said:
ok i will try but i think there is a problem with the flash driver. I also tried to repair it with sony pc companion and when i try to enter flashmode nothing happens. The green light blinks for fewer then a second. And when windows trys to install the driver it fails. It says failed to install SOMC flash device. Fastboot ist working fine. I will try it tomorrow on another computer. I hope it works.
Sorry for my english its not my first language.
Click to expand...
Click to collapse
The drivers is in the flash tool folder >drivers
Do install from there...
DastanShaikh said:
The drivers is in the flash tool folder >drivers
Do install from there...
Click to expand...
Click to collapse
I already did i will now try to delete them and reinstall the drivers.
DastanShaikh said:
The drivers is in the flash tool folder >drivers
Do install from there...
Click to expand...
Click to collapse
Didnt work still the same error
Asdfmoviee said:
Didnt work still the same error
Click to expand...
Click to collapse
Whats the status of drivers..?
Connect ur phone and open device manager... And check.. If there is any exclamation sign
DastanShaikh said:
Whats the status of drivers..?
Connect ur phone and open device manager... And check.. If there is any exclamation sign
Click to expand...
Click to collapse
Finally i got the ftf flashed. Not on the PC but on the Mac book of my sister. Thanks for your help
Asdfmoviee said:
Finally i got the ftf flashed. Not on the PC but on the Mac book of my sister. Thanks for your help
Click to expand...
Click to collapse
No need to say thanks just press the thanks button

[Help] Xperia sp stuck in repairing logo

Hello guys, im new in here, sorry for my bad english i`m just started to learn how good speak english.
anyway, i have torouble with xperia sp stuck in logo repair image in attachment
has been 2 days i`m charge xperia sp light still red and not detecting in flashmode to flash with flashtool and sony companion.
im spent 3 days to search how to fix this problem and i got nothing.
edit : many view but no answer
please help.
many thanks.
TMates said:
Hello guys, im new in here, sorry for my bad english i`m just started to learn how good speak english.
anyway, i have torouble with xperia sp stuck in logo repair image in attachment
has been 2 days i`m charge xperia sp light still red and not detecting in flashmode to flash with flashtool and sony companion.
im spent 3 days to search how to fix this problem and i got nothing.
edit : many view but no answer
please help.
many thanks.
Click to expand...
Click to collapse
Try to charge the phone for few hours and then flash stock rom via flashtool.
Rupant said:
Try to charge the phone for few hours and then flash stock rom via flashtool.
Click to expand...
Click to collapse
charge till green or not ? because my phone light is not getting green after 3 days.
thx for advice i`ll try.
TMates said:
charge till green or not ? because my phone light is not getting green after 3 days.
thx for advice i`ll try.
Click to expand...
Click to collapse
1. Download "C5303_12.1.A.1.207_AU.ftf" (Stock firmware) from here
2. Take of your back cover.
3. Open Flashtool (I expect you to have the Xperia SP drivers installed).
4. Turn off your phone by taking a pen and pressing the "off" hole and wait until it has vibrated 3x.
5. Press volume up (to get into flash mode) and connect your USB cable to the computer and wait until you get a green light.
6. Click on the flash icon in Flashtool and select flash mode. Now select the folder "Downloads" and select the "C5303_12.1.A.1.207_AU.ftf" file you have downloaded and wait 5-10 minutes.
hi, thx for advice.
I've done it and still does not work.
today i try again with charge and flashing my xperia.
TMates said:
hi, thx for advice.
I've done it and still does not work.
today i try again with charge and flashing my xperia.
Click to expand...
Click to collapse
Please click on "thanks" and what error do you get? Please tell us more.
CubeDev said:
Please click on "thanks" and what error do you get? Please tell us more.
Click to expand...
Click to collapse
still the same error stuck in repairing logo and when flashing always stuck in here my log :
23/005/2015 06:05:20 - INFO - <- This level is successfully initialized
23/005/2015 06:05:20 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
23/005/2015 06:05:25 - INFO - Device disconnected
23/005/2015 06:05:31 - INFO - Selected null
23/005/2015 06:05:31 - INFO - Flash canceled
23/006/2015 06:06:17 - INFO - Selected C5303 / 12.1.A.1.207 / AU
23/006/2015 06:06:17 - INFO - Preparing files for flashing
23/006/2015 06:06:31 - INFO - Please connect your device into flashmode.
23/006/2015 06:06:49 - INFO - Device connected in flash mode
23/006/2015 06:06:50 - INFO - Opening device for R/W
23/006/2015 06:06:50 - INFO - Reading device information
23/038/2015 06:38:43 - INFO - Unable to read from phone after having opened it.
23/038/2015 06:38:43 - INFO - trying to continue anyway
23/038/2015 06:38:43 - INFO - Start Flashing
23/038/2015 06:38:43 - INFO - Processing loader
23/038/2015 06:38:43 - INFO - Checking header
23/038/2015 06:38:43 - INFO - Ending flash session
23/038/2015 06:38:43 - ERROR - Error in processHeader : 2 : The system cannot find the file specified.
23/038/2015 06:38:43 - ERROR - Error flashing. Aborted
23/038/2015 06:38:49 - INFO - Device disconnected
23/052/2015 06:52:09 - INFO - Device connected with USB debugging off
23/052/2015 06:52:09 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/052/2015 06:52:14 - INFO - Device disconnected
23/004/2015 07:04:34 - INFO - Device connected with USB debugging off
23/004/2015 07:04:34 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/004/2015 07:04:39 - INFO - Device disconnected
23/050/2015 12:50:40 - INFO - Selected C5303 / 12.1.A.1.207 / AU
23/050/2015 12:50:40 - INFO - Preparing files for flashing
23/050/2015 12:50:58 - INFO - Please connect your device into flashmode.
23/051/2015 12:51:11 - INFO - Device connected in flash mode
23/051/2015 12:51:12 - INFO - Opening device for R/W
23/051/2015 12:51:12 - INFO - Reading device information
Click to expand...
Click to collapse
just stuck in there status and has several times i try results remain the same.
I've been looking at some of the threads with the same log problem remains unsuccessful.
sorry i use google translate and still bad.
Help
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Kaneki Kun said:
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Click to expand...
Click to collapse
You need to install drivers again. They seem to be broken. Are you using Windows 8.1??
If yes, then disable driver signature verification and then install the drivers again.
Kaneki Kun said:
Hello. I have the same problem. I was just backing up my recovery ,all ok , installing new official ROM 12.1 from Cyanogenmod site , but then its says it only support C5030 or whatever and my device is 1bhuashan. Well , that was wierd for me. Then i gave up and just click reboot system now. And now im stuck on SONY logo . Well , sh*t. I did what you said , I downloaded FTF , all drivers for Xperia SP , then I moved to Flashmode , but it wont go to the Flash mode. Now its just waiting for flashmode . While I push Volume down to go to the flashmode , LED turn green , but after 10 sec , sony logo appear . I dont know what to do. Its bricked or what ? Im desperate . Please help
Click to expand...
Click to collapse
If your device vibrates and/or shows a Sony logo, your device isn't bricked. This guide is also for you, @TMates | PLEASE FOLLOW SLOWLY ALONG
Follow this tutorial. (It was hard work):
http://forum.xda-developers.com/xperia-sp/general/tutorial-windows-8-1-10-driver-t3162123
Well , everything is fine , ftf is working , but theres another problem . It says , it need USB debbuging on , but i have no idea how to do it because the phone is dead.
---------- Post added at 04:26 PM ---------- Previous post was at 03:57 PM ----------
Actually , I have USB debugging on , but PC dont recognize it.
Kaneki Kun said:
Well , everything is fine , ftf is working , but theres another problem . It says , it need USB debbuging on , but i have no idea how to do it because the phone is dead.
---------- Post added at 04:26 PM ---------- Previous post was at 03:57 PM ----------
Actually , I have USB debugging on , but PC dont recognize it.
Click to expand...
Click to collapse
Debugging mode is only for a phone in turned on state.
When you flash the device you do it in Flashmode which has nothing to do with debugging mode on or off.
Just press the "Flash" button.
Select firmware from list.
Press OK, and go into Flashmode.
CubeDev said:
If your device vibrates and/or shows a Sony logo, your device isn't bricked. This guide is also for you, @TMates | PLEASE FOLLOW SLOWLY ALONG
Follow this tutorial. (It was hard work):
http://forum.xda-developers.com/xperia-sp/general/tutorial-windows-8-1-10-driver-t3162123
Click to expand...
Click to collapse
xperia sp untill today not going green light, thx sir for ur advice.
i`ll follow ur step and update here for progress.
thank you very much.
TMates said:
xperia sp untill today not going green light, thx sir for ur advice.
i`ll follow ur step and update here for progress.
Click to expand...
Click to collapse
Please do not skip any step.
Hello? Could you report?
CubeDev said:
Hello? Could you report?
Click to expand...
Click to collapse
sorry, i almost forgotten to update progress about my phone because i`m busy to fix it and now my xperia cant charging again, so desperate.
i have a plan to replace my battery and back to try your step and flash again.
btw, im not give up until my xperia sp work again.
really sorry.
TMates said:
sorry, i almost forgotten to update progress about my phone because i`m busy to fix it and now my xperia cant charging again, so desperate.
i have a plan to replace my battery and back to try your step and flash again.
btw, im not give up until my xperia sp work again.
really sorry.
Click to expand...
Click to collapse
Hi, did you solve the problem. Because I have exactly the same problem with you.

Need Help Friends!,

Good evening everyone,
i have sony xperia z version XperiaZ_10.5.1.A.0.292 version..i want to flash kernel Xperiaz_10.5.A.0.230_kernel_only.ftf root my phone, install recovery then install back XperiaZ_10.5.1.A.0.292_kernel_only.ftf.
as following thread https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-10-5-1-0-283-t2872873
i tried all flashtool versions Flashtool-0.6.6-windows,flashtool-0.9.9.0-windows,flashtool-0.9.19.8-windows,
flashtool-0.9.19.10-windows and flashtool-0.9.23.1, to flash the kernel Xperiaz_10.5.A.0.230_kernel_only.ftf
but went unsuccessful. Sometimes i get loader.sin finished with errors sometimes,sometimes it takes ages to check header,sometimes it takes ages in flashing loader.
Here are some screenshots attached of the error im facing,..
please be kind to shower some light of your knowledge to me so i can successful flash the kernel Xperiaz_10.5.A.0.230_kernel_only.ftf using flashmode and please be kind to illustrate what went wrong and what could be my solution to my problem
i would wait for your kind assistance,
appreciating your help and time,
sameer
please use flashtool version 0.9.18.6,then flash stock rom back...if you want root you can use kingroot app..you can download the app from this link https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-xperia-z-android-5-0-t3151618
HI
dummytest97 said:
please use flashtool version 0.9.18.6,then flash stock rom back...if you want root you can use kingroot app..you can download the app from this link https://forum.xda-developers.com/xperia-z/general/guide-how-to-root-xperia-z-android-5-0-t3151618
Click to expand...
Click to collapse
Thanks for the help though im also getting this error processing of emmc_appsboot_signed_s1-boot-scan3-0001-mmc.sin finished with error when i try to flash C6602_Customized US_10.7.A.0.222 using flashtool 0.9.18.6.
when i try to flash C6602_10.5.1.A.0.292_Customized US i get kernel.sin and sometimes partitio-image.sin error.
though to some problem my phone xperia z when i on it shows the software update failed please connect to computer and try again.
Help me please! would appreciate.
[email protected] said:
Thanks for the help though im also getting this error processing of emmc_appsboot_signed_s1-boot-scan3-0001-mmc.sin finished with error when i try to flash C6602_Customized US_10.7.A.0.222 using flashtool 0.9.18.6.
when i try to flash C6602_10.5.1.A.0.292_Customized US i get kernel.sin and sometimes partitio-image.sin error.
though to some problem my phone xperia z when i on it shows the software update failed please connect to computer and try again.
Help me please! would appreciate.
Click to expand...
Click to collapse
What model of your phone? C6603 or C6602?
Did your flash driver install correctly?
hi
dummytest97 said:
What model of your phone? C6603 or C6602?
Did your flash driver install correctly?
Click to expand...
Click to collapse
my model number is c6602, Installed all drivers in flashtool.
Also xperia companion fails to do the recovery and when turning on the phone shows sony logo with the update failed make sure the phone is connected to the computer and try again...so don't know what i should do...
any help would be appreciated ..im using win 10. allowed the installation of insigned drivers already.
thanks sameer
[email protected] said:
my model number is c6602, Installed all drivers in flashtool.
Also xperia companion fails to do the recovery and when turning on the phone shows sony logo with the update failed make sure the phone is connected to the computer and try again...so don't know what i should do...
any help would be appreciated ..im using win 10. allowed the installation of insigned drivers already.
thanks sameer
Click to expand...
Click to collapse
I saw one of the driver failed to installed, if it not related with flash mode driver then let it be...that driver you install from flashtool by androxyde?
If yes the driver should not be the problem anymore..
I use driver from flashtool too located at disk C/flashtool/driver...it install successfully without any problem..
May i know what's your phone condition before you start flashing? Is it working fine before?
One more..try using another usb port too..
hi
dummytest97 said:
One more..try using another usb port too..
Click to expand...
Click to collapse
hey brother,installed windows 10 and windows 7 ultimate a fresh,installed all drivers in windows 7 successful.but when i try to use flashtool-0.9.18.6-windows my sony xperia z stuck a the screen processing of kernel.sin finished with errors for hours..don't know what to do.
previously it worked well everything..tried to update the recovery and it all started... tried to use xperia companion it failed ,...flashtool failed..update failed,..please connect your phone with computer and try again.
Any solutions,suggestions...please kindly spare.
thanks sameer

Categories

Resources