As I can go from CWM6 to CWM5, I reinstall the ROM RC1_TheUltimatum (V4.0_Final) [-The'A'Factor] but I can not because I have CWM6...
Oh if you can, tell me which is the most stable ROM for CWM11 having the Gapps and works for the camera
jualmarxkh said:
As I can go from CWM6 to CWM5, I reinstall the ROM RC1_TheUltimatum (V4.0_Final) [-The'A'Factor] but I can not because I have CWM6...
Oh if you can, tell me which is the most stable ROM for CWM11 having the Gapps and works for the camera
Click to expand...
Click to collapse
The simple solution will be to reflash the stock rom using odin, then root your device and finally install CWM5. Here is the link on how to install stock rom using odin along with all firmwares and drivers (check the "Preparations" section),
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
As for CM11, you can try the CM11 rom by @Salim El Yabouri which can be installed from CWM5. Here is the link,
Kitkat For All
Hope I Helped
Related
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
thinkfreedom said:
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
Click to expand...
Click to collapse
You will always have that problem coz the ROMs you flashed requires GB. so go flash GB first before you install CWM and custom ROMs..
thinkfreedom said:
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
Click to expand...
Click to collapse
it should be 2.3.4 before you installing CWM
HERE IS WHAT YOU NEED:
1. YOU NEED TO FLASH YOUR PHONE TO GINGERBREAD 2.3.4
2. AFTER FLASHING STOCK ROM, ROOT IT!
3. INSTALL CLOCK WORK MOD
In this part, it is now the installation of your CUSTOM MADE ROM
1. Wipe Dalvick Cache
2. Wipe Data/Reset
3. Wipe Cache
4. Install Zip from sd card then locate the zip file
5. YOUR GOOD TO GO!
BTW: Always wait for the rom to load, it may take awhile to load if it is installed for the first time
Like If this helped you THANKS
What's your model number? ?
You need to flash GB-
Using Odin multi downloader+tass and also need CWM(for flash CM)...
Sent from my GT-S5570 using XDA
Thanks buddies...but already found a way out now my phone is working.
hi,
I used to have darky rom 10.4.2 on a Samsung galaxy S .
wanted to move to cynagenmod 7.2 stable, but when i was flashing it using clockworkmod 5.x,
the phone has got into a boot loop.
been searching over a few hours now, nothing comes close to fixing the issue.
can you share some experience here and help.
regards
raghav..
If you can't acces CWM, you can try to flash some other kernel for CM7.2, if won't help, the only way is to download some official ROM from samfirmware.com, flash it using Odin, then ROOT it and try to flash CM7.2 again...
Do you have a backup (Nandoid or titanium backup )? That's important for all following actions.
If not, pull out the battery and try to get into cwm of darky ROM. Otherwise flash the resurrection ROM (via Odin) from darky. After that do a backup and erase all data (wipe data,cache and dvailk cache). Flash a 7.2 ROM (like miui) or kernel to get the 5.xx cwm and finally restore your backup
If u get any issuses, repeat with a stock ROM which is already rooted.
Sent from my GT-I9000 using Tapatalk 2
Hi all i have a problem with install rom.
I have a upgraded kernel thunder zap reloaded 3.5. Try to install rom Supressed Rom v 3.0. When i install the rom my phone stuck. I try to install any rom like Supressed Jelly Bean or OmegaRom X. All installation is stuck. Now my phone is frozzen no rom. Only CWM is work. Any idea how to start the phone.
Sry for my english.
saphiel said:
Hi all i have a problem with install rom.
I have a upgraded kernel thunder zap reloaded 3.5. Try to install rom Supressed Rom v 3.0. When i install the rom my phone stuck. I try to install any rom like Supressed Jelly Bean or OmegaRom X. All installation is stuck. Now my phone is frozzen no rom. Only CWM is work. Any idea how to start the phone.
Sry for my english.
Click to expand...
Click to collapse
I think you are trying to install GB roms... Supressed Rom 3.0 is for GB Look for roms with (JB) in front only. You may have to reflash with odin your JB rom if this is the case.
bobfrantic said:
I think you are trying to install GB roms... Supressed Rom 3.0 is for GB Look for roms with (JB) in front only. You may have to reflash with odin your JB rom if this is the case.
Click to expand...
Click to collapse
Yes you have right. Only reflash on odin is work. THX :victory:
saphiel said:
Yes you have right. Only reflash on odin is work. THX :victory:
Click to expand...
Click to collapse
you are welcome, go ahead and click the thanks button(s) lol
i have the same problem supressed rom based on JB ... then i reinstall JB via odin then try again to install chucky-bean master rom and again it's stuck on logo samsung galaxy s GT-I9070 no boot animation working nothing ... only recovery mod i tested that with thunderzap 3.5 kernel ...
Brocky2011 said:
i have the same problem supressed rom based on JB ... then i reinstall JB via odin then try again to install chucky-bean master rom and again it's stuck on logo samsung galaxy s GT-I9070 no boot animation working nothing ... only recovery mod i tested that with thunderzap 3.5 kernel ...
Click to expand...
Click to collapse
Wipe cache, dalvik cache and do factory reset in CWM.
First thing before i install the custom rom was doing the next steps:
-format system
-format cache
-format data
-wipe data/ factory reset
-wipe chache
-wipre dalvik
then i select chucky-bean master rom
then i do again wipe chache and wipre dalvik
then reboot and after reboot it was stuck ...
Just flashed Supressed Jelly Bean build 3 Rom with CWM 6.0.1.5 prom shaaan ( just put the update.zip into sdcard then install it from CWM) and it works so you can try now i hope i helped you
How to downgrade from KitKat to jelly bean 4.1.2 through recovery
You can only flash custom ROMs based on touchwiz ROMs through recovery like sweetrom or aryamod .... or use Odin to flash original Samsung firmware because you can't use recovery to flash original firmware.
Press thanks if I helped you.
Sent from my GT-N7000
kaborayyan said:
You can only flash custom ROMs based on touchwiz ROMs through recovery like sweetrom or aryamod .... or use Odin to flash original Samsung firmware because you can't use recovery to flash original firmware.
Press thanks if I helped you.
Sent from my GT-N7000
Click to expand...
Click to collapse
Or he just has to flash kernel for stock based ROMs and then flash some 4.0.x ROM.
I have Omni rom 4.4.2 and how to go back to 4.1.2 (sweet room v1.1 lta e.g or aryamod v4)
sasabo said:
I have Omni rom 4.4.2 and how to go back to 4.1.2 (sweet room v1.1 lta e.g or aryamod v4)
Click to expand...
Click to collapse
same way you flashed omni.
nokiamodeln91 said:
same way you flashed omni.
Click to expand...
Click to collapse
any tutorial?
sasabo said:
any tutorial?
Click to expand...
Click to collapse
boot recovery
wipe data and cache
install new rom
reboot
Wipe Data/Factory reset” or not?
sasabo said:
Wipe Data/Factory reset” or not?
Click to expand...
Click to collapse
Same as step 2
which cwm to flash,philz v5 or kitkat v 6?This say by sweet rom: Flash any Philz JB Kernel (after 4.35 cwm but recommend any newer than 4.89.4).
Do I need to flash an older version of CWM recovery when I switched back to JB 4.1.2?
How to revert back from Omni ROM KitKat to Stock Jellybean Rom on my N7000
Hi,
I am a noob and have installed Omni ROM KitKat 4.4.4 on my Samsung Galaxy Note N7000.
I am not able to effectively the features that were available on my note ealrier, not I am able to backup contacts from Titanium BAck Up.
I would like to revert back to the original firmware jellybean 4.1.2 . Is downgrading going to brick my mobile , can some one help me with this .
lakkuMS said:
Hi,
I am a noob and have installed Omni ROM KitKat 4.4.4 on my Samsung Galaxy Note N7000.
I am not able to effectively the features that were available on my note ealrier, not I am able to backup contacts from Titanium BAck Up.
I would like to revert back to the original firmware jellybean 4.1.2 . Is downgrading going to brick my mobile , can some one help me with this .
Click to expand...
Click to collapse
Downgrading to JB is as easy as booting into recovery, wiping data, booting into download mode and flashing the stock rom
or booting into recovery and flash a custom TW rom or restore the backup if you made any before flashing Omni.
I have a non-rooted phone upgraded with what Samsung provided (several OTA, then Kies to 4.1.2, N7000XXLTC).
I'd like to downgrade to stock 4.0.4. My steps are:
1. wipe cache & data from Recovery (would a Factory Reset do both?);
2. use Odin to flash the ROM;
3. never do any sort of wipe again.
Is that correct?
doloresanto said:
I have a non-rooted phone upgraded with what Samsung provided (several OTA, then Kies to 4.1.2, N7000XXLTC).
I'd like to downgrade to stock 4.0.4. My steps are:
1. wipe cache & data from Recovery (would a Factory Reset do both?);
2. use Odin to flash the ROM;
3. never do any sort of wipe again.
Is that correct?
Click to expand...
Click to collapse
Steps are correct... Use the recovery option to wipe data / factory reset ..instead of the settings menu.
Do I have to root my device to use PC Odin?
doloresanto said:
Do I have to root my device to use PC Odin?
Click to expand...
Click to collapse
No
nokiamodeln91 said:
Downgrading to JB is as easy as booting into recovery, wiping data, booting into download mode and flashing the stock rom
or booting into recovery and flash a custom TW rom or restore the backup if you made any before flashing Omni.
Click to expand...
Click to collapse
same thing for me,
but I have a issue here. I had made a backup of my 4.1.2 rom in cwm, and flashed a 4.4.3 omnibus rom,, after flashing omni I have twrp recovery rather cwm recovery , so I am unable to restore cwm backup
do I need to flash cwm again ,?
or any other ways
omni rom draining battery very fast, and it made a dead battery
thanks
vishvish3 said:
same thing for me,
but I have a issue here. I had made a backup of my 4.1.2 rom in cwm, and flashed a 4.4.3 omnibus rom,, after flashing omni I have twrp recovery rather cwm recovery , so I am unable to restore cwm backup
do I need to flash cwm again ,?
or any other ways
omni rom draining battery very fast, and it made a dead battery
thanks
Click to expand...
Click to collapse
Yes you will need to get CWM.. flash raw or philz kernel and then reboot recovery, wipe and restore the backup.
Let me share my own experience
Whenever i wanna go back to jellybean from kitkat :
1. Do clean wipe
2. Flashing official gingerbread rom
3. And then installing jellybean..
I dont know why but whenever flashing jellybean after do a clean wipe it never works so what i do is flashing gingerbread first hehe
Sent from my GT-N7000 using XDA Free mobile app
I'm on 4.4.4 DU Rom.. The phone got hanged after I enabled the allow mock location option. Then the phone got stuck at the Samsung Logo screen. I went to recovery and tried doing factory reset, but it failed with error as unable to mount /data. After that recovery mode is not available, but I can go in Download mode. So, i tried to install JB 4.1.2 - N7000XXLTA via Odin. But the process gets failed after 'NAND write start'!!!
Any solution???
Hi guys,
I have been trying to install cm based roms like ultimatum. i have stock gb 2.3.6 ddkq8, and cwm 6.0.4.6. but i am not able to install any of the cm based roms. Any help is appreciated. everytime i flash via cwm, it says installation status 7 and it reverts back to unrooted stock version. before flashing i wipe data/cache/ dalvik. am i missing something>
Thanks
shyam9876 said:
Hi guys,
I have been trying to install cm based roms like ultimatum. i have stock gb 2.3.6 ddkq8, and cwm 6.0.4.6. but i am not able to install any of the cm based roms. Any help is appreciated. everytime i flash via cwm, it says installation status 7 and it reverts back to unrooted stock version. before flashing i wipe data/cache/ dalvik. am i missing something>
Thanks
Click to expand...
Click to collapse
Hi,
Try reverting back to CWM 5. As far as i know, CWM 6 was made only with the intention of flashing Android 4.4 Kit Kat builds. Do post your result. You can find the CWM 5 link below. Hope I helped
CWM 5.0.2.6 fix for Galaxy Ace S5830