[Q] S-pen Fault - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi all,
Ok background, ive had my phone a few years but smashed the screen! Got a full replacement front so only moved the boards and stuff across, no heating it up or anything... I found once i had turned it on and started it up I have an issue with my S-pen, when using it with just my finger its fine, however, the s pen is intermittent at best... I cannot draw in the centre of the screen at all but the outer edges are fine to a point?
Does anybody know whats going on here? Any help will be greatly received

I've attached a picture of a s-pen test! If anyone can help please

AaronHarris said:
I've attached a picture of a s-pen test! If anyone can help please[/QU
Hi dude,
I'm no expert! But I had a similar problem when I was using SOKP rom. While the spen drawing kept getting distorted at one part of the screen, but when I reflashed, no such problem! to check if its something wrong with your screen you could go to settings>developer options>and tick show touches and pointer layouts... if you still can see the spen being detected by the overlay, im pretty sure you can come to a conclusion if your digitizer is defective or not!
Click to expand...
Click to collapse

Related

XDA IIi Screen alignment trouble

Hi all
I have a problem with the screen alignment on my XDA IIi. I can get through the alignment tool fine and the 5 points match up correctly - however between the 5 points things can get quite far out of place. I tested this by trying to draw straight lines in notepad - the lines were very wonky, except for the sections near alignment points.
I was wondering if anyone knew of any software with more alignment points or any other possible fix.
Thanks in advance.
bushako
wow...rare case dude...never heard of anything of that kind..i guess you must have dropped it or better yet try Performing a hard reset, it may solve the problem...you must have installed a program that cause it to behave this way...
bushako
and oh yeah dont forget to back up,hehe
Yeah tried a hard reset... still no luck :\
I wonder if i should open it up and have a poke around.
Before you do that you might want to read on how the early Hermes were fixed, ie sliding a business card around the frame of the screen.
However, from personal experience, I once screwed up my touchscreen by sliding a screen protector up too high, so be careful. You might just open it up and take your chances there instead
Check out a service manual if you have access.
V
Sinturion said:
Hi all
I have a problem with the screen alignment on my XDA IIi. I can get through the alignment tool fine and the 5 points match up correctly - however between the 5 points things can get quite far out of place. I tested this by trying to draw straight lines in notepad - the lines were very wonky, except for the sections near alignment points.
I was wondering if anyone knew of any software with more alignment points or any other possible fix.
Thanks in advance.
Click to expand...
Click to collapse
Dude did u get it fixed..i think im facing the same problems now...when aligning the screen the 4 points match up correctly but also wen i draw something using 3rd part programs like pocket artist..id try to draw a straight line at the bottom of the screen and instead it appears curved..and when typing messages i always end up inserting the wrong characters even though i point at the correct letters...i tried swapping a telephone card inbetween the screen and the panel but it didnt make much difference...i can open it up and take a look but i dont think much can be done either...so if anyone else is facing this problem and have resolved this issue..please let me know...
yes, same as me.
whenever I tried to hit space bar, the button above the space bar will be pressed instead :-(
can anyone come up with the solution on this device problem ?
anyone got a solution for this?
I am experiancing the same problems basically I think the manufacturer installed protective screen has come loose from the hard sensor (due to use?) and so the stylus is pushing on an air bubble.
I dont know whether to cut out that layer with a scalpel (carefully or not) and use normal screen protectors that stick properly ... has anyone done this before?
Yes, you could be right relbourn, at first I was suspecting the screen protector causing this problem but
hm.. I've tried even to remove the screen protector and did HARD RESET as well but still......... the problem can't be solved :-| gees...
any idea ? instead of replacing the touch screen ?
any suggestion or similar problem with this ?

[Q] Note N7000 possibly dead - Triage? Morgue? Repair?

Folks,
Need a bit of help here. N7000 just hit the ground and something cracked. It doesn't look like the external screen has cracked but the display is all kinds of messed up. I can get part of the screen to respond, but some of it won't...
Asking a few questions... This device has multiple layers of the "screen" correct? How can I check to see what is cracked, and what can be repaired?
Currently the screen has gone to a green hue, it looks like probable damage to the LED screen? I can receive calls, and my HS3000 was connected when it fell so bluetooth is working, but I cannot see any info...I can perform calls via the headset.
Looking to find some options and get an idea of costs involved in any possible self repair. Any other help is greatly appreciated.
This never happened to my N900. :crying:
coderedcomputing said:
Folks,
Need a bit of help here. N7000 just hit the ground and something cracked. It doesn't look like the external screen has cracked but the display is all kinds of messed up. I can get part of the screen to respond, but some of it won't...
Asking a few questions... This device has multiple layers of the "screen" correct? How can I check to see what is cracked, and what can be repaired?
Currently the screen has gone to a green hue, it looks like probable damage to the LED screen? I can receive calls, and my HS3000 was connected when it fell so bluetooth is working, but I cannot see any info...I can perform calls via the headset.
Looking to find some options and get an idea of costs involved in any possible self repair. Any other help is greatly appreciated.
This never happened to my N900. :crying:
Click to expand...
Click to collapse
It looks like you need a screen repair... You should repair the entire screen but if it makes you wallet bleed and you are brave enough go ahead and try open it,
squabbi said:
It looks like you need a screen repair... You should repair the entire screen but if it makes you wallet bleed and you are brave enough go ahead and try open it,
Click to expand...
Click to collapse
Thanks. Yeah this thing is toast. I saw the youtube of the guy replacing just the LCD... NOPE. The assembly is almost as much as another unlocked phone. BAH.

Help with touch related problem

Hi guys,
My Xperia ZR started behaving abnormally some days back, I put "screentouchtest" app and found that there were random inputs on the phone which made the phone go useless... Check the screen shot attached.
So I tried to make an app that will disable only that part on my screen and I was successful at it... Check screenshot attached. I could then at least use my phone to some extent.
But now the frequency of these random touch inputs have increased and that has made it again go unusable...
Problem is that I made this app as a floating app and whenever user touches other part of the phone , touch below the unblocked area is activated.
SO now I wanted to disable the touch completely over this area...any help will be appreciated.
Sony says it is due to water logging in the motherboard and no warranty will be given.
You are not alone!
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
highevolutionary said:
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
Click to expand...
Click to collapse
If you think its a software problem, i'll try putting some custom ROM.
sourabhp said:
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
Click to expand...
Click to collapse
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Custom rom doesn't help
Engic0 said:
If you think its a software problem, i'll try putting some custom ROM.
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Click to expand...
Click to collapse
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
highevolutionary said:
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
Click to expand...
Click to collapse
May be there is a problem with the touch digitizer under the LCD panel which is misbehaving. No software can fix it. You will need to replace the touch digitizer along with LCD screen as they are sold as single unit. Check online if you can find the parts and ask any local mobile repairer to replace it. :good:
NO Luck with Custom ROM
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Engic0 said:
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Click to expand...
Click to collapse
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
sourabhp said:
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
Click to expand...
Click to collapse
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Engic0 said:
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Click to expand...
Click to collapse
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
sourabhp said:
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
Click to expand...
Click to collapse
lol Okay
SOLUTION!!
Engic0 said:
lol Okay
Click to expand...
Click to collapse
Finally, a solution. Time for a digitizer+screen. Thank you guys.
Hey what is the app you made? I'm in the same boat but can't really afford a new digitizer....
Yep i need it too. It will be greatly appreciated if you share your app here. Thanks in advance.
Sent from my Sparkle V using Tapatalk
sorry guys for late reply!
I am attaching the apk here...
I have this problem too but it only happens if the phone screen get wet
Some time it happen randomly but when i press on the screen at bottom and on led gently it disappear and back to normal
Thank you!
The Float APK solved the major issue of my faulty touch screen in my Nexus 4. There are two lines in my screen where the touch is not working anymore. One of them is having several crazy clicks making my phone somehow useless. By using this app, I can prevent that, which is great!
Two issues I've got:
- the textbox to set the distance from the top is located exactly in the first dead line! So I need to turn my phone sideways to be edit to click there and edit its value.
- when using the phone in horizontal mode, blocked zone turns as well, but the faulty zone is fixed there.
I'm wondering if you might share with us the source code or maybe you consider to make some improvements on it?
Thank you so much for sharing this app here!
thanks for this app solution.
I too have problem of ghost touches. This app definately helps with that and makes the phone somewhat usable again.
The only problem is that some ghost touches are continous (it's like someone presses their finger on the screen and keeps holding it there). This makes action by other touches unresponsive.
Maybe we can find a solution for this in the float app?
Source code for the app
Finally since many of you requested, here is the source code! - Stop Touch - Source Code

Some problems with Note 5?

I'm having some strange problems that my girlfriend who also has a Note 5 has not encountered.
Sometimes, my top left side of the screen won't work? Or if there is functionality I mean. For example, in messages, when you're in a message sometimes I can't click the top left to go back to the list of messages? A restart seems to fix this, however, I didn't pay for a phone not to work.
Any ideas? I'm planning on getting another Note 5 and then returning this one.
Just a bit of an update I guess. It just stopped working, the top left hand side of the screen. I tried pressing harder and it didn't work. I couldn't pull down the notification bar until I moved toward the top middle of the screen.
After a bit of just using my phone, the top left is working like normal. Anyone have any idea as to what is happening?
I read something somewhere that if you disable Facebook Messenger then the problem would go away... try that does it work?
SomeAsianDude said:
I'm having some strange problems that my girlfriend who also has a Note 5 has not encountered.
Any ideas? I'm planning on getting another Note 5 and then returning this one.
Click to expand...
Click to collapse
@aukyew seems to be having the same problem as you. He has a thread on the second page of this section. You might PM him and see if he has found a fix.
KruseLudsMobile said:
I read something somewhere that if you disable Facebook Messenger then the problem would go away... try that does it work?
Click to expand...
Click to collapse
Are you saying as in like the chat heads? My girlfriend has the messenger enabled and like chat heads and what not and it always works for her. So maybe not that.
CodeNameRedNeck said:
@aukyew seems to be having the same problem as you. He has a thread on the second page of this section. You might PM him and see if he has found a fix.
Click to expand...
Click to collapse
Thank you, I'll give that a look.
I'm facing the same problem with my note 5. I actually observed three different spots on screen where it sometimes goes dead (3 dead spots on screen). The spot keeps changing the positions. The most common spot which goes dead is the the bottom right part. I couldn't type letter L on my SwiftKey keyboard. One spot is same as you mentioned that it top left of the screen. The third spot is at the letter Q on the keyboard. I couldn't find out the exact solution for that. I'll try disabling the messenger chat heads and see whether it's work or not.
Do any of you have screen protectors on?
Yeah, tampered glass.
I have had problems in the past with cheap tampered glass protectors and screen not working in random spots. It wasn't a note 5 though. I think it was something with the curve of the Nokia Lumia. Id try it without any screen protectors first
It has nothing to do with the tampered glass. I removed my tampered glass but there are still dead spots on the screen. Also, the screen was working fine sometimes even with the screen protector on.
Yeah I had this problem too but after a while it just went away
I removed tampered glass and since then I didn't face this problem. I think that was just because of screen protector.

Dual Screen and Extended Mode Aren't Working (AT&T Version)

Hello everyone,
I was wondering if anyone else is having trouble getting dual screen or extended mode to work? My Axon M has those two options greyed out whenever I open the second screen. I'm attaching pics to explain, but this has been happening on mine for a while now I've tried resetting my whole phone, waiting to see if it would “load” those two buttons, tried changing settings, etc. Nothing is working.... I feel like I wanted my money on this awful phone which hates me. I'm also gonna include a pic of my settings in case that helps. Thank you to anyone who could help me figure this out! I really appreciate it
I am having this issue as well. It just started to happen though. Both those modes were working before, Now only the mirror is working for me.
Edit:
I have fixed the issue. The sensor that detects if the phone is fully open was not activating. I opened the phone and pressed firmly on the back of the main body. I heard a small click(something snapping into place). I think the body was a bit lose and the sensor was not actuating because of this.
caz1135 said:
I have fixed the issue. The sensor that detects if the phone is fully open was not activating. I opened the phone and pressed firmly on the back of the main body. I heard a small click(something snapping into place). I think the body was a bit lose and the sensor was not actuating because of this.
Click to expand...
Click to collapse
If only I thought to check this... Hopefully other people will find this info helpful at least
I have the same issue with recently received phone.
I tried to push on the back - but didn't get the click and didn't help me.
I found the same issue and half solution - using magnet by tapping on the back of main screen - where the sensor is.
https://community.zteusa.com/discussion/54349/extended-dual-mode-not-working
Again it's not permanent solution - but at least it helps to solve the problem for one session with the phone.
Hi!
I know is an old phone and an old tread, but has anybody found a solution besides the magnet thing?
I have the same problem and It's kinda annoying having to carry a magnet with me for the phone
is there a way or an app to make the phone believe its always unfold, so i can just switch modes ?

Categories

Resources