Database Develop

Tilt USB port damaged..

Frat.. My fully upgraded Tilt (Dutty Rom 6) got its USB port damaged while I accidentally poked the stylus in there instead of the reset hole.
...now it won't sync with my pc however does charge only when I plug in the dedicated wall charger into it. So, on visual inspection, I saw the 5 pins (thats how many they seem) with last two next to the reset hole "misaligned".
I've tried poking a needle and trying to straighten it back into place but didn't work and I gave up fearing further damage to the port.
basically, I called At&t and they are mailing me a replacement device but now I'm not sure if I would need to re-flash the original AT&T rom back before returning.... anyone have any experience in the returns field? The cust serv rep "read" me a disclaimer (felt like hearing my rights by a cop!) stating that if they find any liquid or other damage to the phone then I may be charged $497.00 for it as it would be considered as warranty voided.
So, no mention of any s/w changes in the disclaimer she read to me also resulting in the same. But I surely don't want to take a chance therefore am humbly asking for some input from someone who may have experience similar situation?!!
Reading the "Tilt re-flash due to not voiding warranty if having to return" sticky-thread's all 14 pages did not give me even a single post where anyone can confirm if at&t will indeed consider messing up with the s/w as voiding warranty.... unless ofcourse I'm blind..(has happened once in a while).
I've also searched on this and have not found any posts.. again, I'm mentioning this so that the mods and/or others won't burn me for not doing my homework.

Wouldnt it be easier to flash a stock rom from SD card than wait and see if they void your warranty?

Sane said:
Wouldnt it be easier to flash a stock rom from SD card than wait and see if they void your warranty?
Click to expand...
Click to collapse
Well.. I'm trying to avoid flashing the stock rom altogether. As I've noticed almost every 2nd post on the stock-rom-flashing-for-warranty sticky not having a smooth run while returning the phone to its original state.
besides.. what do you mean by "then wait and see if they void your warranty?"..
Thats exactly what I'm trying to avoid in the first place as once I mail the unit back I will have no control on the outcome unless ofcourse either someone confirms that not reverting back to the stock rom won't cause a $500 hole in my pocket or otherwise, in which case I'll have to re-flash it.

If you've flashed a different ROM then they will know and they will say you caused the damage and charge the full price for it.

they might charge you full price anyway because the usb port is damaged. it might just be easier to fix the port urself...

I know Pocket PC Techs can repair the connector in most cases:
http://www.pocketpctechs.com/main~u...T+Tilt+Sync+Connector+Replacement+Service.htm

AWESOME!!
PsyOpWarlord said:
I know Pocket PC Techs can repair the connector in most cases:
http://www.pocketpctechs.com/main~u...T+Tilt+Sync+Connector+Replacement+Service.htm
Click to expand...
Click to collapse
Thanks a million for the site. I had no idea that a service like that existed and that too specifically addressing my exact issue. I'm gonna keep it bookmarked for future.
Fortunately, I was able to stick a needle in one of the pins and push them up and then have it held there with a dab of super glue. So far, its working like a charm but if it ever fails again I'll go the above route.
This is awesome.. I was very concerned in having to receive the replacement unit as with experience of having used several pda phones over the years I've learned that the refurb units that the warranty replacement give you is got a good 50-50 chance of having some kind of hw or sw flaw.. so... I'm glad to have kept my phone.

Took mine right back to the ATT store for a damaged usb port, all they did was confirm it wouldn't read via the usb and exchanged it right there for a new one, i was told it was a 1 year replacement warranty on the phone, they didn't check a thing, give it a try, i have also exchanged one that was erased buy getting to close to a mag drill at work, although it was not a tilt they exchanged it without even batting an eye, thanks tjenus

tjenus said:
Took mine right back to the ATT store for a damaged usb port, all they did was confirm it wouldn't read via the usb and exchanged it right there for a new one, i was told it was a 1 year replacement warranty on the phone, they didn't check a thing, give it a try, i have also exchanged one that was erased buy getting to close to a mag drill at work, although it was not a tilt they exchanged it without even batting an eye, thanks tjenus
Click to expand...
Click to collapse
Hi tjenus,
You mean you brought the faulty tilt, together with the original accessories it came with, to the store and they replaced your set for a brand new, retail version, of the tilt?
What else was required, the receipt or anything?
Thanks!
Gerald

tjenus said:
Took mine right back to the ATT store for a damaged usb port, all they did was confirm it wouldn't read via the usb and exchanged it right there for a new one, i was told it was a 1 year replacement warranty on the phone, they didn't check a thing, give it a try, i have also exchanged one that was erased buy getting to close to a mag drill at work, although it was not a tilt they exchanged it without even batting an eye, thanks tjenus
Click to expand...
Click to collapse
I call BS after being a AT-T customer for years I know for a fact they don't swap out phones even at corp... Stores they tell you to call in and have a warrenty replacment shipped to you. Thats just how it works UNLESS your withen the 14 day grace period then they would probably do it. The reason they do this according to AT-T is they don't have enough stock in each store to do swap outs. You best bet is to call AT-T and have them ship you a new one and flash abck to the origanl rom they don't check the SPL version what so ever they just look if it has water damage and any other visable signs of abuse.

I returned mine
I had this same thing happen. The USB failed to work after I dropped my phone. So seeing how I could not reflash it, I ran out all the power on it, until it had nothing....it would not even boot. With all the battery drained, I knew that even if they plugged it in, they would not see I had flashed the rom....though they could have used a new battery. I took it in, and told the local ATT reseller that the USB stopped working. It was within 30days of purchase. They took it back and exchanged it no questions asked. They didnt even test it. Now, i just wont drop my new one, lol.
Good luck.

Not entirely related, but for those who purchased an HTC TyTN II and try to have it repaired in the US, beware: it is not covered under warranty here. After just under 4-weeks I found the USB port was loose and would no longer take a charge. After more than 4-weeks in HTC America and after refusing to accept their assessment of "User Abuse" and the $300 mainboard repair cost, they finally shipped it back to me, mainboard replaced via Fedex Ground... according to several HTC America reps I spoke with - there have been numerous similar cases reported to them since the TyTN II debut two months ago. Perseverence may pay off -- although I should have known better, my next purchase won't be through a parallel importer.
Cheers

hah. did this too.. called at&t and had them warranty exchange it. i just bent it back around with the stylus enough that it would work so that could revert back so i could send it back. havent heard anything from them.. so im assuming there not gonna charge me

aquanaut88 said:
Not entirely related, but for those who purchased an HTC TyTN II and try to have it repaired in the US, beware: it is not covered under warranty here. After just under 4-weeks I found the USB port was loose and would no longer take a charge. After more than 4-weeks in HTC America and after refusing to accept their assessment of "User Abuse" and the $300 mainboard repair cost, they finally shipped it back to me, mainboard replaced via Fedex Ground... according to several HTC America reps I spoke with - there have been numerous similar cases reported to them since the TyTN II debut two months ago. Perseverence may pay off -- although I should have known better, my next purchase won't be through a parallel importer.
Cheers
Click to expand...
Click to collapse
i own a tytn 2 in the usa and got the same from htc. my usb got messed up a little on its own than i stuck the stencil in there and it barely worked(had to wiggle it) anyways i found a repair center but they didnt have parts. ordered the parts from ppc techs and they sent me a different connector. its the same one in the sprint mogul which i think is a better build. so they replaced it and everything is perfect with the charging now but they did something with my hinge. its off a little. can anyone point me in the right direction to take my phone apart so i can fiddle with the hinge? any help is greatly appreciated

Hi,
I just got a Tilt from craigslist. The phone came with the At&T box, but unfortunately I forgot to get the receipt. Now the USB port is broken and I want to see if I can return for warranty.
The phone still has the AT&T ROM and infact I havent unlocked it. So will this be a problem if I just say I dont have the receipt but the rest and returned it with the box?
Please help!!!

ramnan said:
Hi,
I just got a Tilt from craigslist. The phone came with the At&T box, but unfortunately I forgot to get the receipt. Now the USB port is broken and I want to see if I can return for warranty.
The phone still has the AT&T ROM and infact I havent unlocked it. So will this be a problem if I just say I dont have the receipt but the rest and returned it with the box?
Please help!!!
Click to expand...
Click to collapse
Not unless you are the original one that bought it from AT-T they will say sorry buddy !! you could try but I would save my breath

Hi
I had the same Issue - but it was fixed inside warranty!
But I was runing "original" rom.
But the somehow made the "reset" button work strange now - So it will go back once more.
BR
Daniel

Please respond to...
http://forum.xda-developers.com/showthread.php?t=362679

Kaiser keyboard and Dpad issues

Hello,
I have been a longtime lurker/reader of this crazy wealth of knowledge, but i've finally run into a problem with my tytn ii that I can't find a solution to (despite searches). Any input would be fantastic. Let me preface this by saying I picked up this phone early on, new/oem. I can't really take it in to AT&T, especially since it's a kaiser not a tilt. Here's the issue:
A couple weeks ago, my keyboard and dpad just quit working. The phone and touchscreen were still completely functional, but no other input method worked. When I hit the power button, it would turn the screen on and type edfc, and begin recording a voice memo. Immediately that looks like a hardware problem. My brother (tech genius; replaced the LCD with me when that broke a few months ago) took it apart and checked all the connections and everything looked alright. After reassembling it, nothing had changed. I backed up everything on the phone and hard reset it. Still no change. I switched ROMs, and still no change. I think it must just be a failed piece of hardware.
Since the only things that don't function are the keyboard AND front dpad, I'm thinking it must be the board / ribbon that connects the two halves. I don't really have any way to test this though, and that's discouraging. So for the tldr types:
1) Are the parts from the tilt / tytn ii interchangeable, or would i have to find parts specifically for the tytn ii?
2) Is it worth picking up a phone with a broken screen/case etc and attempt to fix mine myself?
3) Is there a reputable repair place that it might be worth shipping my phone off to?
4) Is there another possibility as to why my phone is doing this that i've overlooked?
Thanks for any help

6 month ago I had the same problem, it's an hardware problem. I send my Kaiser to warrantly and 2 weeks later I've got a new kaiser that works good. So use warrantly

I'm fairly certain i cannot send my unit in to warranty. Had I known the extent of problems these phones have since been shown to have, I would have purchased one with warranty. :\

haserfauld said:
1) Are the parts from the tilt / tytn ii interchangeable, or would i have to find parts specifically for the tytn ii?
Click to expand...
Click to collapse
Yes, the parts are interchangeable, so you dont have to get parts specifically for the tytn ii (unless its the housing and you want the same branding on it).
Check out pocketpcthoughts.com they have main flex cable button assembly and the main keyboard assembly for sale as parts.
haserfauld said:
2) Is it worth picking up a phone with a broken screen/case etc and attempt to fix mine myself?
Click to expand...
Click to collapse
Thats worth a shot, i'd recommend that if you find one at a good price. But watch out. I purchased a Wizard a while ago with a broken lcd in hopes of using its mainboard. Swapped out the mainboard with my damaged one and it didnt work so i was left with 2 dead devices
haserfauld said:
3) Is there a reputable repair place that it might be worth shipping my phone off to?
Click to expand...
Click to collapse
I'd check out pocketpctechs.com and look into HTC usa.
haserfauld said:
4) Is there another possibility as to why my phone is doing this that i've overlooked?
Click to expand...
Click to collapse
not sure but does sound like a hardware problem from what you've described.
haserfauld said:
Thanks for any help
Click to expand...
Click to collapse
Your welcome

awesome, thanks so much for the info. I have a bid pending on a damaged tilt on eBay...keeping my fingers crossed. If it goes for cheap hopefully it fixes it. If not, I may pick up one of those flex cable assemblies, as I'm almost certain that's the failing part. Thanks again

Battery health very poor?

Hello !
I think my battery is close to giving his last amps, my Z can't manage to stay powered on without a charger for more then 5 minutes, If I'm lucky and don't put too much of a load on the battery it stays on a little longer and I can actually listen to music on the train. But whenever I open snapchat or the camera for example, my phone crashes immediately and I can't turn my phone on without using a charger, it just keeps looping right after recovery. The weird thing is that in recovery he can stay on until the battery is actually depleted, so I also already tried to completely drain the battery and then charge him to 100% without disconnecting, but same thing.
I thought the problem was lollipop related but sadly enough it's not, going back to kitkat and reflashing my kernel(which is just flashing boot.img in fastboot, right?) didn't work.
Any ideas? Thanks in advance!

Try to reflash stock firmware, and post results.

convict_moody said:
Try to reflash stock firmware, and post results.
Click to expand...
Click to collapse
Thanks for replying, reflashed to 10.5.1.A.0.292 but no luck there either, phone just requires a charger to function properly.
I guess it's hardware related

brambizimski said:
Thanks for replying, reflashed to 10.5.1.A.0.292 but no luck there either, phone just requires a charger to function properly.
I guess it's hardware related
Click to expand...
Click to collapse
Yes it is. If you have the problem on any ROM, relock your bootloader if it's unlocked, flash a stock unrooted ROM and send your phone to repair (if you still have the warranty, it must be repaired for free). Or you can order a battery from aliexpress and change it yourself (personally I don't recommend this).

DragosBad said:
Yes it is. If you have the problem on any ROM, relock your bootloader if it's unlocked, flash a stock unrooted ROM and send your phone to repair (if you still have the warranty, it must be repaired for free). Or you can order a battery from aliexpress and change it yourself (personally I don't recommend this).
Click to expand...
Click to collapse
Sorry for the late reply, but just heard from repair service they can't repair it because of a shatter in the back glass, pretty lame because I've had that for a year now and my phone worked fine until now.
Should I look out for dodgy sellers on AliExpress? because the batteries are all pretty cheap, I'll probably get a new back glass as well since it's so cheap.
I've got a fair amount of knowledge when it comes to electronics so switching a battery won't be that much of a problem I think? Or was that not the reason why you didn't recommend it?

brambizimski said:
Sorry for the late reply, but just heard from repair service they can't repair it because of a shatter in the back glass, pretty lame because I've had that for a year now and my phone worked fine until now.
Should I look out for dodgy sellers on AliExpress? because the batteries are all pretty cheap, I'll probably get a new back glass as well since it's so cheap.
I've got a fair amount of knowledge when it comes to electronics so switching a battery won't be that much of a problem I think? Or was that not the reason why you didn't recommend it?
Click to expand...
Click to collapse
Yeah that's why I didn't recommend it. It is not that easy to change the battery yourself. Don't forget to buy the glue necessary to put the glass cover back (I think some sellers include this glue with the back cover if you buy a new one). And regarding the dodgy thing, yeah look out from who you buy before doing it.

DragosBad said:
Yeah that's why I didn't recommend it. It is not that easy to change the battery yourself. Don't forget to buy the glue necessary to put the glass cover back (I think some sellers include this glue with the back cover if you buy a new one). And regarding the dodgy thing, yeah look out from who you buy before doing it.
Click to expand...
Click to collapse
What kind of glue is it?

Is not glue bro is adhesive back cover xperia z Google it eBay

Anyone had to replace their battery yet? There are a few sellers on aliexpress but I;m not sure which one to buy (are the aliexpress rating even real?)

Any info on MIUI Global 8.0.7.0.0 (MAHCNDI)?

I have a vendor ROM on my Mi Mix: MIUI Global 8.0.7.0.0 (MAHCNDI)
Has anyone else found this ROM on their phone?
It came with gapps installs and has been completely fine so far.

whatwhat1 said:
I have a vendor ROM on my Mi Mix: MIUI Global 8.0.7.0.0 (MAHCNDI)
Has anyone else found this ROM on their phone?
It came with gapps installs and has been completely fine so far.
Click to expand...
Click to collapse
which vendor did you get the device from? thanks

whatwhat1 said:
I have a vendor ROM on my Mi Mix: MIUI Global 8.0.7.0.0 (MAHCNDI)
Has anyone else found this ROM on their phone?
It came with gapps installs and has been completely fine so far.
Click to expand...
Click to collapse
Mine came with that firmware, got mine from HK.

mac231us said:
which vendor did you get the device from? thanks
Click to expand...
Click to collapse
Ebay

Here's a good question - how do you tell if there's any dodgy spyware or whatever installed on a vendor rom?

whatwhat1 said:
I have a vendor ROM on my Mi Mix: MIUI Global 8.0.7.0.0 (MAHCNDI)
Has anyone else found this ROM on their phone?
It came with gapps installs and has been completely fine so far.
Click to expand...
Click to collapse
I got mine from HK as well. Same ROM.
I just assumed it was the normal ROM that these phones came with..

omniphil said:
I got mine from HK as well. Same ROM.
I just assumed it was the normal ROM that these phones came with..
Click to expand...
Click to collapse
Are you able to do any software updates?

whatwhat1 said:
Are you able to do any software updates?
Click to expand...
Click to collapse
If I go into About Phone -> Software Updates, its does appear to check for updates and it tells me no updates are available...

omniphil said:
If I go into About Phone -> Software Updates, its does appear to check for updates and it tells me no updates are available...
Click to expand...
Click to collapse
Same for me. My concern is that I think there should be an update. That is not the latest software revision...

omniphil said:
I got mine from HK as well. Same ROM.
I just assumed it was the normal ROM that these phones came with..
Click to expand...
Click to collapse
From what I've read vendor roms have 5 digits, stock roms have 4 digit version numbers.

I too, have this ROM. I've had this phone for 3 years and love the design. Just last week, the screen started separating from the frame on the right side of the phone. The flash doesn't work anymore and it has a small chip on the right top corner of the glass. I don't know how this happened because I take superlative care of my devices. Anyway, I tried to find another new one from a seller and I DID find one on DH Gate that was selling them brand new for $192. At first I thought it was a hoax, but I bought it and it was delivered on Thursday. Monday-Thursday from China to Texas. I always choose expedited shipping. DHL usually delivers in 2 days from China to Texas.
That being said, the new one had some strange developer ROM on it and I did root it, but was having issues with the original ROM, so I reverted back to an older version that could be rooted. I bought my original Mi Mix from a seller on E-bay named manysellok. I ordered about 10 phones from that seller, so I like to go with sellers that I have a good experience with. I just wrote the seller tonight on 6-7-2020 and told them about my situation. The new ROM had the Mi store and the THEMES app are both in Chinese. No matter what I do, I cannot make them display English.
---------- Post added at 03:43 AM ---------- Previous post was at 03:42 AM ----------
I too, have this ROM. I've had this phone for 3 years and love the design. Just last week, the screen started separating from the frame on the right side of the phone. The flash doesn't work anymore and it has a small chip on the right top corner of the glass. I don't know how this happened because I take superlative care of my devices. Anyway, I tried to find another new one from a seller and I DID find one on DH Gate that was selling them brand new for $192. At first I thought it was a hoax, but I bought it and it was delivered on Thursday. Monday-Thursday from China to Texas. I always choose expedited shipping. DHL usually delivers in 2 days from China to Texas.
That being said, the new one had some strange developer ROM on it and I did root it, but was having issues with the original ROM, so I reverted back to an older version that could be rooted. I bought my original Mi Mix from a seller on E-bay named manysellok. I ordered about 10 phones from that seller, so I like to go with seller that I have a good experience with. I just wrote the seller tonight on 6-7-2020 and told them about my situation. The new ROM had the Mi store and the THEMES app are both in Chinese. No matter what I do, I cannot make them display English.

talon1812 said:
I too, have this ROM. I've had this phone for 3 years and love the design. Just last week, the screen started separating from the frame on the right side of the phone. The flash doesn't work anymore and it has a small chip on the right top corner of the glass. I don't know how this happened because I take superlative care of my devices. Anyway, I tried to find another new one from a seller and I DID find one on DH Gate that was selling them brand new for $192. At first I thought it was a hoax, but I bought it and it was delivered on Thursday. Monday-Thursday from China to Texas. I always choose expedited shipping. DHL usually delivers in 2 days from China to Texas.
That being said, the new one had some strange developer ROM on it and I did root it, but was having issues with the original ROM, so I reverted back to an older version that could be rooted. I bought my original Mi Mix from a seller on E-bay named manysellok. I ordered about 10 phones from that seller, so I like to go with sellers that I have a good experience with. I just wrote the seller tonight on 6-7-2020 and told them about my situation. The new ROM had the Mi store and the THEMES app are both in Chinese. No matter what I do, I cannot make them display English.
---------- Post added at 03:43 AM ---------- Previous post was at 03:42 AM ----------
I too, have this ROM. I've had this phone for 3 years and love the design. Just last week, the screen started separating from the frame on the right side of the phone. The flash doesn't work anymore and it has a small chip on the right top corner of the glass. I don't know how this happened because I take superlative care of my devices. Anyway, I tried to find another new one from a seller and I DID find one on DH Gate that was selling them brand new for $192. At first I thought it was a hoax, but I bought it and it was delivered on Thursday. Monday-Thursday from China to Texas. I always choose expedited shipping. DHL usually delivers in 2 days from China to Texas.
That being said, the new one had some strange developer ROM on it and I did root it, but was having issues with the original ROM, so I reverted back to an older version that could be rooted. I bought my original Mi Mix from a seller on E-bay named manysellok. I ordered about 10 phones from that seller, so I like to go with seller that I have a good experience with. I just wrote the seller tonight on 6-7-2020 and told them about my situation. The new ROM had the Mi store and the THEMES app are both in Chinese. No matter what I do, I cannot make them display English.
Click to expand...
Click to collapse
Would you consider to sell your old MI MIX?

Hangya1990 said:
Would you consider to sell your old MI MIX?
Click to expand...
Click to collapse
I'm not sure if I want to sell it or not. The display on the old one is much brighter than the new one.
This was the most expensive phone that I ever bought. I paid like $725 for it. It's still very usable, just that flash issue and the screen separating on the right side. Honestly, I don't notice it unless I view it from the right side. Using the phone normally I don't even notice it. Other than those 3 issues, the phone is pristine. I never hold it to my ear, I always talk with bluetooth. And I have been a germaphobe for about 35 years now, way before the corona virus came out. When I buy a used phone, usually on E-bay, I'll wipe it down about 3 times with Clorox bleach foamer. Then use Clorox wipes, then finally with alcohol. I don't allow germs on my phones. I wasn't really thinking about selling it, but if you really needed one, I can point you to the seller that I bought my new one from. He's in China. Choose expedited shipping and he'll ship it Fed-Ex. I got mine 2 days after he shipped it and I live in Texas.
https://www.dhgate.com/product/orig...5199967.html?skuid=563545286555742208#seo=WAP
Cheers,
Frank

talon1812 said:
I'm not sure if I want to sell it or not. The display on the old one is much brighter than the new one.
This was the most expensive phone that I ever bought. I paid like $725 for it. It's still very usable, just that flash issue and the screen separating on the right side. Honestly, I don't notice it unless I view it from the right side. Using the phone normally I don't even notice it. Other than those 3 issues, the phone is pristine. I never hold it to my ear, I always talk with bluetooth. And I have been a germaphobe for about 35 years now, way before the corona virus came out. When I buy a used phone, usually on E-bay, I'll wipe it down about 3 times with Clorox bleach foamer. Then use Clorox wipes, then finally with alcohol. I don't allow germs on my phones. I wasn't really thinking about selling it, but if you really needed one, I can point you to the seller that I bought my new one from. He's in China. Choose expedited shipping and he'll ship it Fed-Ex. I got mine 2 days after he shipped it and I live in Texas.
https://www.dhgate.com/product/orig...5199967.html?skuid=563545286555742208#seo=WAP
Cheers,
Frank
Click to expand...
Click to collapse
Im using my Mix since 01.2017, no any separation anywhere no flash issue, yours might be reacting to bleach/alcohol. But I guess there's a special glue for it. I'd say go for it.
Sent from my Xiaomi Mi Mix using XDA Labs

I didn't use all of the chemicals on this one because I bought it brand new.
I only do that with USED phones that I buy.
Check out the link I sent. He's a good seller and you'll get the new one fast with Fed-Ex.
Konstantine34 said:
Im using my Mix since 01.2017, no any separation anywhere no flash issue, yours might be reacting to bleach/alcohol. But I guess there's a special glue for it. I'd say go for it.
Sent from my Xiaomi Mi Mix using XDA Labs
Click to expand...
Click to collapse

Replacement screen?

Hey guys,
I managed to drop my 3T a few days back, cracked the screen, over the course of a day it became fully black, rendering the display unusable.
I've seen some posts of people complaining about how bad their replacement screens are. My local GSM store said they could order a (semi-genuine, lol) display for around $150 - I'm assuming people who are having issues with their replacement screens got some cheap ones off of eBay.
My question is, would this replacement cost be a huge ripoff with me ending up with a somewhat ****ty replacement screen, or is it just worth buying a new phone at this point?
EDIT:
Okay so, my order arrived, took it to my local GSM store, they swapped the displays. Luckily everything works fine, I've got no dead or stuck pixels, screen off gestures, notification led, back and menu buttons, fingerprint reader, everything works just fine. The only little issue is that my actual display part doesn't fit quite fully into the frame, so it's like half a millimeter "elevated" on the left side. Probably not going to cause any issues, it's just that dust can get more easily under the screen.
DIgitizer is also recognized by default, no need for custom kernel, thank god

Try to find some OEM screen (50 - 60 $) its original but not from oneplus

meetlicious said:
Try to find some OEM screen (50 - 60 $) its original but not from oneplus
Click to expand...
Click to collapse
Do either of these look good to you?
https://www.ebay.com/itm/Original-A...-A3010-LCD-Display-Touch-Screen-/222591712582
https://www.witrigs.com/oem-lcd-screen-assembly-for-oneplus-3-a3000-black
I was told they can only replace the screen if I order it with frame, which both of these sales can do, I'm just not sure if there's anything I should be looking out for to clarify whether or not they're going to be a scam
I love this phone a lot, really don't want to buy a new one, and I also want to triple check before getting a replacement screen, just to be sure.

meetlicious said:
Try to find some OEM screen (50 - 60 $) its original but not from oneplus
Click to expand...
Click to collapse
Some of them have massive issues with unified roms and need a patched kernel to always properly switch on. See the los-16.0 thread for details. The main issue seems to be, that there are oem displays out ther, which claim to be a5 but are actually a3.
@Lada333: if an original (not semi original, not nearly original, but original) replacement screen is too expensive, I'd recommend a new phone to any flashaholic... Maybe you get a good deal on a used (but original... ) 6 or 6t.

nvertigo67 said:
Some of them have massive issues with unified roms and need a patched kernel to always properly switch on. See the los-16.0 thread for details. The main issue seems to be, that there are oem displays out ther, which claim to be a5 but are actually a3.
@Lada333: if an original (not semi original, not nearly original, but original) replacement screen is too expensive, I'd recommend a new phone to any flashaholic... Maybe you get a good deal on a used (but original... ) 6 or 6t.
Click to expand...
Click to collapse
I ended up buying the one from the eBay listing ("original" black + frame). Haven't looked into the issue you mentioned earlier, but I'd be fine having to use a patched kernel. I looked around for new phones (I couldn't stand buying a used one), but none of them really seem to be worth it for me. It's either some dum-dum popup camera, or some ugly notch. 3T's design still takes it all for me. A 5T would be hella nice, but then again, not in production anymore, and getting a second-hand one is no deal for me.

I have used official Oneplus repair in my country and was satisfied. its important to order the repair on official site. i've attached pricelist

allspi said:
I have used official Oneplus repair in my country and was satisfied. its important to order the repair on official site. i've attached pricelist
Click to expand...
Click to collapse
As far as I know, there's no OnePlus repair here in Hungary, also I haven't bought my phone directly from them - last time I had a repair in question, they told me to contact my Point of Sale, figured they'd advise the same this time too.
Thank you for the tip though!

Lada333 said:
As far as I know, there's no OnePlus repair here in Hungary, also I haven't bought my phone directly from them - last time I had a repair in question, they told me to contact my Point of Sale, figured they'd advise the same this time too.
Click to expand...
Click to collapse
this site: https://www.oneplus.com/hu/support/repair
does it work? happy New Year!

I bought AMOLED screen with frame from aliexpress for my 3T, working well just for 2400/- INR.. Took around 28 days to deliver to India.

aashutoshrc said:
I bought AMOLED screen with frame from aliexpress for my 3T, working well just for 2400/- INR.. Took around 28 days to deliver to India.
Click to expand...
Click to collapse
I ended up buying a replacement part from the ebay listing I linked above for about double the price you paid for yours. It has yet to be delivered to me, it's still stuck at the office of exchange.

Okay so, my order arrived, took it to my local GSM store, they swapped the displays. Luckily everything works fine, I've got no dead or stuck pixels, screen off gestures, notification led, back and menu buttons, fingerprint reader, everything works just fine. The only little issue is that my actual display part doesn't fit quite fully into the frame, so it's like half a millimeter "elevated" on the left side. Probably not going to cause any issues, it's just that dust can get more easily under the screen.
DIgitizer is also recognized by default, no need for custom kernel, thank god

Lada333 said:
DIgitizer is also recognized by default, no need for custom kernel, thank god
Click to expand...
Click to collapse
Digitizer is not the "standard" issue for some non-oneplus panels - display keeps black occasionally after waking up the device is. See my previous posting and the detailed discussion in the los-16 thread.
Crossing fingers your panel is not effected!

nvertigo67 said:
Digitizer is not the "standard" issue for some non-oneplus panels - display keeps black occasionally after waking up the device is. See my previous posting and the detailed discussion in the los-16 thread.
Crossing fingers your panel is not effected!
Click to expand...
Click to collapse
See my previous posting
Click to expand...
Click to collapse
Would you mind linking the post again? IIRC you had it linked in your other post in this thread, but I can't seem to be able to find it anymore.
Crossing fingers your panel is not effected!
Click to expand...
Click to collapse
So far so good, I've been using it quite often since I got it back, never had any issues with it so far, I'm hoping it's gonna stay that way
Is it possible for me to check whether or not the display is 'a5' or 'a3'?

Lada333 said:
Would you mind linking the post again? IIRC you had it linked in your other post in this thread, but I can't seem to be able to find it anymore.
Click to expand...
Click to collapse
I've referenced to the los-16 thread. I have NOT linked single postings. You need to search yourself. Good friends toöd me: if I not want to feel like a search assistant I have to stop behaving like one.
Lada333 said:
So far so good, I've been using it quite often since I got it back, never had any issues with it so far, I'm hoping it's gonna stay that way
Is it possible for me to check whether or not the display is 'a5' or 'a3'?
Click to expand...
Click to collapse
Theorethically in sysfs (i.e.: grep panel_name /sys/devices/virtual/graphics/fb0/msm_fb_panel_info), but in this case it can't work. The oem panels in question show themselfs as a5 but support only the a3 dtsis... It's really worth searching the conversation in the los-16 thread.

nvertigo67 said:
I've referenced to the los-16 thread. I have NOT linked single postings. You need to search yourself. Good friends toöd me: if I not want to feel like a search assistant I have to stop behaving like one.
Theorethically in sysfs (i.e.: grep panel_name /sys/devices/virtual/graphics/fb0/msm_fb_panel_info), but in this case it can't work. The oem panels in question show themselfs as a5 but support only the a3 dtsis... It's really worth searching the conversation in the los-16 thread.
Click to expand...
Click to collapse
It sure is, if only I knew which los-16 thread you're referring to, and if only the search function wasn't broken (for me at least) on xda ¯\_(ツ)_/¯
Thanks for the heads up though once again!